(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Cantilever Shafts - Screw Mount with Tapped End - Stepped
The pilot base-wide sizes are added to the product specifications.
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| FXJB8A-[7-60/1]-F[5-100/1]-MA4 |
| FXJB10A-[7-60/1]-F[5-100/1]-MA[4,5,6] |
| FXJB22A-[7-60/1]-F[10-100/1]-MA[6,8,10,12] |
| PFXJB6A-[7-60/1]-F[5-100/1]-MA3 |
| PFXJB8A-[7-60/1]-F[5-100/1]-MA4 |
| PFXJB10A-[7-60/1]-F[5-100/1]-MA[4,5,6] |
| PFXJB18-[7-60/1]-F[10-100/1]-MA[6,8,10] |
| PFXJB22A-[7-60/1]-F[10-100/1]-MA[6,8,10,12] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Diameter (mm) (mm) | Surface Treatment | M (Coarse) | H Dimension (mm) | Flange Size | F (mm) | Thread Dia. Selection [MA] | Y (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 8 | Black Oxide | 4 | 16 | Wide | 5 ～ 100 | 4 | 7 ～ 60 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Black Oxide | 6 | 20 | Wide | 5 ～ 100 | 4 ～ 6 | 7 ～ 60 | ||
- | 1 Piece(s) | 5 Day(s) or more | 22 | Black Oxide | 8 | 28 | Wide | 10 ～ 100 | 6 ～ 12 | 7 ～ 60 | ||
- | 1 Piece(s) | 6 Day(s) or more | 6 | Electroless Nickel Plating | 3 | 14 | Wide | 5 ～ 100 | 3 | 7 ～ 60 | ||
- | 1 Piece(s) | 6 Day(s) or more | 8 | Electroless Nickel Plating | 4 | 16 | Wide | 5 ～ 100 | 4 | 7 ～ 60 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | Electroless Nickel Plating | 6 | 20 | Wide | 5 ～ 100 | 4 ～ 6 | 7 ～ 60 | ||
- | 1 Piece(s) | 5 Day(s) or more | 18 | Electroless Nickel Plating | 10 | 23 | Standard | 10 ～ 100 | 6 ～ 10 | 7 ～ 60 | ||
- | 1 Piece(s) | 6 Day(s) or more | 22 | Electroless Nickel Plating | 8 | 28 | Wide | 10 ～ 100 | 6 ～ 12 | 7 ～ 60 |
Loading...
Basic Information
| Shaft Retaining Method | Tapped (Screw) | Bearing Retaining Method | Tapped (Screw) | Retainer Shape | Stepped, Wrench Flats |
|---|---|---|---|---|---|
| Material | Steel | Hardness | Hardness Not Spec-designed | Material | S45C Equivalent |
Specification/Dimensions
-
Shaft Diameter (mm)(mm)
-
Surface Treatment
- Black Oxide
- Electroless Nickel Plating
-
M (Coarse)
- 3
- 4
- 6
- 8
- 10
-
H Dimension(mm)
-
Flange Size
- Standard
- Wide
-
F(mm)
-
Thread Dia. Selection [MA]
-
Y(mm)
-
type
- FXJB
- PFXJB
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
- Cantilever Shafts - Threaded with Threaded End - Standard
- Cantilever Shafts - Threaded with Retaining Ring Groove - Hex
- Cantilever Shafts - Piloted Thread with Retaining Ring Groove - Standard
- Cantilever Shafts - Piloted Thread with Retaining Ring Groove - Stepped
- Cantilever Shafts - Piloted Thread with Tapped End - Stepped
- Cantilever Shafts - Screw Mount with Retaining Ring Groove - Standard
- Cantilever Shafts - Screw Mount with Retaining Ring Groove - Hex
Complementary Products
-
Deep Groove Ball Bearing-Double Shielded
MISUMI_Test Standard Price : MYR 6.84- Days to Ship : 1 Day(s) or more
-
Silicon Rubber / Urethane Molded Bearings - Flat
MISUMI_Test Standard Price : MYR 23.54- Days to Ship : 1 Day(s) or more
-
Idler Sprockets - Single Bearing, Double Bearing
MISUMI_Test Standard Price : MYR 49.43- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
Cantilever Shafts - Screw Mount with Tapped End - StandardMISUMI_Test
Days to Ship : 5 Day(s) or more
-
-
Cantilever Shafts - Screw Mount with Retaining Ring Groove - SteppedMISUMI_Test
Days to Ship : 5 Day(s) or more
-
Cantilever Shafts - Screw Mount with Threaded End - SteppedMISUMI_Test
Days to Ship : 5 Day(s) or more
-
Cantilever Shafts - Screw Mount with Retaining Ring Groove - HexMISUMI_Test
Days to Ship : 6 Day(s) or more
-
-
-
Cantilever Shafts - Screw Mount with Threaded End - StandardMISUMI_Test
Days to Ship : 5 Day(s) or more
-
Cantilever Shafts - Piloted Thread with Tapped End - SteppedMISUMI_Test
Days to Ship : 5 Day(s) or more
-
Cantilever Shafts - Piloted Thread with Retaining Ring Groove - HexMISUMI_Test
Days to Ship : 6 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy