Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Pivot Pins - End Shape Combination Selectable

MISUMI_Test

Shaft End Shapes are selectable.

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
FCLCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
FCLCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
FCLCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLHAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1]
FCLHCD-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]
FCLHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]
FCLHHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1]
FCLSCA-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]
FCLSHCC-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-50/0.1]
FCLSHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
FCLSHCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
FCLSHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]
FCLSHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
FCLSHHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1]
GFCLAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1]
GFCLBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1]
GFCLBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1]
GFCLCA-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]
GFCLCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLCC-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-50/0.1]
GFCLCD-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]
GFCLCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]
GFCLDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]
GFCLEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
GFCLFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
GFCLGC-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-50/0.1]
GFCLHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1]
GFCLSHAC-D[3-20/1]-L[5-200/0.1]-NC[2-50/0.1]
GFCLSHBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1]
GFCLSHBC-D[6-20/1]-L[5-200/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1]
GFCLSHCA-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]
GFCLSHCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
GFCLSHCB-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
GFCLSHCC-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-50/0.1]
GFCLSHCD-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]
GFCLSHCE-D[4-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLSHCF-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-MC[3,4,5,6,8,10,12,16]
GFCLSHCG-D[3-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1]
GFCLSHCH-D[6-20/1]-L[5-200/0.1]-N[2-50/0.1]-NC[2-125/0.1]
GFCLSHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1]
GFCLSHEC-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
GFCLSHFC-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-NC[2-50/0.1]
GFCLSHGC-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-NC[2-50/0.1]
GFCLSHHC-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-NC[2-50/0.1]
PFCLAC-D[3-20/1]-L[5-150/0.1]-NC[2-50/0.1]
PFCLBC-D[6-20/1]-L[5-150/0.1]-N[0-125/0.1]-G[0-10/0.1]-NC[2-50/0.1]
PFCLBC-D[6-20/1]-L[5-150/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-NC[2-50/0.1]
PFCLCA-D[3-20/1]-L[5-150/0.1]-N[2-50/0.1]
PFCLCB-D[6-20/1]-L[5-150/0.1]-N[2-50/0.1]-NC[0-125/0.1]-GC[0-10/0.1]
PFCLCB-D[6-20/1]-L[5-150/0.1]-N[2-50/0.1]-NC[0-125/0.1]-MC[3,4,5,6,8,10]
PFCLCC-D[3-20/1]-L[5-150/0.1]-N[2-50/0.1]-NC[2-50/0.1]
PFCLCD-D[3-20/1]-L[5-150/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Basic Shape	Mounting Method	Shaft Dia. D (mm)	Material	Hardness	Surface Treatment	Material Detail	Left End Shape	Right End Shape	G (mm)	GC (mm)	H (mm)	HC (mm)	K (mm)	KC (mm)	L (mm)	M (mm)	MC (mm)	N (mm)	NC (mm)	T (mm)	TC (mm)	Y (mm)	YC (mm)
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Not Spec-designed	Black Oxide	S45C / S45C Equivalent	C	B	-	0 ～ 10	-	-	-	-	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Not Spec-designed	Black Oxide	S45C / S45C Equivalent	C	B	-	-	-	-	-	-	5 ～ 200	-	3 ～ 10	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	3 ～ 20	Steel	Not Spec-designed	Black Oxide	S45C / S45C Equivalent	C	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Steel	Not Spec-designed	Black Oxide	S45C / S45C Equivalent	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring / Tapped	6 ～ 20	Steel	Not Spec-designed	Black Oxide	S45C / S45C Equivalent	F	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	-	Straight	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Black Oxide	S45C Equivalent	A	C	-	-	-	-	-	-	5 ～ 200	-	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	6 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Black Oxide	S45C / S45C Equivalent	C	D	-	-	-	4 ～ 30	-	-	5 ～ 200	-	-	2 ～ 50	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	8 Day(s) or more	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Steel	Hardness Spec-designed	Black Oxide	S45C Equivalent	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Black Oxide	S45C / S45C Equivalent	D	C	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 50	0.5 ～ 125	-	-	-
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring / Set Screw (V Groove)	6 ～ 20	Steel	Hardness Spec-designed	Black Oxide	S45C / S45C Equivalent	H	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	6 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Stainless Steel	Not Spec-designed	Not Provided	SUS304 / SUS304 (Equivalent)	C	A	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	-	Straight	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	C	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Tapped	6 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	C	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Straight	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	3 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	C	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	D	C	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 50	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (V Groove)	6 ～ 20	Stainless Steel	Hardness Spec-designed	Not Provided	SUS440C (Equivalent)	H	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	A	C	-	-	-	-	-	-	5 ～ 200	-	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	B	C	0 ～ 10	-	-	-	-	-	5 ～ 200	-	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	B	C	-	-	-	-	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	A	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	B	-	0 ～ 10	-	-	-	-	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	B	-	-	-	-	-	-	5 ～ 200	-	3 ～ 10	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	D	-	-	-	4 ～ 30	-	-	5 ～ 200	-	-	2 ～ 50	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Tapped	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (V Groove)	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	C	H	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	Shouldered	Retaining Ring	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	D	C	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 50	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Tapped	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	F	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	3 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	G	C	-	-	-	-	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	2 ～ 50	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (V Groove)	6 ～ 20	Steel	Hardness Spec-designed	Hard Chrome Plating	S45C / S45C Equivalent	H	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	A	C	-	-	-	-	-	-	5 ～ 200	-	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	B	C	0 ～ 10	-	-	-	-	-	5 ～ 200	-	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	B	C	-	-	-	-	-	-	5 ～ 200	3 ～ 10	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	A	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	B	-	0 ～ 10	-	-	-	-	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	B	-	-	-	-	-	-	5 ～ 200	-	3 ～ 10	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	D	-	-	-	4 ～ 30	-	-	5 ～ 200	-	-	2 ～ 50	-	-	0.5 ～ 125	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	E	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Tapped	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	F	-	-	-	-	-	-	5 ～ 200	-	3 ～ 16	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	G	-	-	-	-	-	2 ～ 30	5 ～ 200	-	-	2 ～ 50	0 ～ 125	-	-	-	0 ～ 10
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (V Groove)	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	C	H	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 50	2 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	D	C	-	-	4 ～ 30	-	-	-	5 ～ 200	-	-	-	2 ～ 50	0.5 ～ 125	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Lock Nut (Threaded)	4 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	E	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Tapped	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	F	C	-	-	-	-	-	-	5 ～ 200	3 ～ 16	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (Set Screw Flat, D-Cut) / Keyway	3 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	G	C	-	-	-	-	2 ～ 30	-	5 ～ 200	-	-	0 ～ 125	2 ～ 50	-	-	0 ～ 10	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Set Screw (V Groove)	6 ～ 20	Stainless Steel	Hardness Spec-designed	Hard Chrome Plating	SUS440C (Equivalent)	H	C	-	-	-	-	-	-	5 ～ 200	-	-	2 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	A	C	-	-	-	-	-	-	5 ～ 150	-	-	-	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	B	C	0 ～ 10	-	-	-	-	-	5 ～ 150	-	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	B	C	-	-	-	-	-	-	5 ～ 150	3 ～ 10	-	0 ～ 125	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	C	A	-	-	-	-	-	-	5 ～ 150	-	-	2 ～ 50	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	C	B	-	0 ～ 10	-	-	-	-	5 ～ 150	-	-	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring / Cotter Pin	6 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	C	B	-	-	-	-	-	-	5 ～ 150	-	3 ～ 10	2 ～ 50	0 ～ 125	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Straight	Retaining Ring	3 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	C	C	-	-	-	-	-	-	5 ～ 150	-	-	2 ～ 50	2 ～ 50	-	-	-	-
-	1 Piece(s)	7 Day(s)	-	Shouldered	Retaining Ring	3 ～ 20	Steel	Not Spec-designed	Electroless Nickel Plating	S45C / S45C Equivalent	C	D	-	-	-	4 ～ 30	-	-	5 ～ 150	-	-	2 ～ 50	-	-	0.5 ～ 125	-	-

Basic Information

Type	L Dimension Configurable

Configure

86 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Basic Shape
- Shouldered
- Straight
Clear
Shaft Dia. D(mm)
[3-20/1mm Unit(s)]
Clear
Material
- Steel
- Stainless Steel
Clear
Hardness
- Not Spec-designed
- Hardness Spec-designed
Clear
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
Clear
Material Detail
- S45C
- S45C Equivalent
- SUS304
- SUS304 (Equivalent)
- SUS440C (Equivalent)
Clear
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
Clear
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
Clear
G(mm)
[0-10/0.1mm Unit(s)]
Clear
GC(mm)
[0-10/0.1mm Unit(s)]
Clear
H(mm)
[4-30/0.5mm Unit(s)]
Clear
HC(mm)
[4-30/0.5mm Unit(s)]
Clear
K(mm)
[2-30/0.1mm Unit(s)]
Clear
KC(mm)
[2-30/0.1mm Unit(s)]
Clear
L(mm)
[5-200/0.1mm Unit(s)]
Clear
M(mm)
3

4

5

6

8

10

12

16
Clear
MC(mm)
3

4

5

6

8

10

12

16
Clear
N(mm)
[0-125/0.1mm Unit(s)]
Clear
NC(mm)
[0-125/0.1mm Unit(s)]
Clear
T(mm)
[0.5-125/0.1mm Unit(s)]
Clear
TC(mm)
[0.5-125/0.1mm Unit(s)]
Clear
Y(mm)
[0-10/0.1mm Unit(s)]
Clear
YC(mm)
[0-10/0.1mm Unit(s)]
Clear
type
- FCLAA
- FCLBD
- FCLBG
- FCLCB
- FCLCG
- FCLDE
- FCLEA
- FCLEB
- FCLEC
- FCLEH
- FCLFC
- FCLFG
- FCLGB
- FCLGD
- FCLHAB
- FCLHAC
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHBB
- FCLHBF
- FCLHCD
- FCLHCE
- FCLHD
- FCLHDA
- FCLHDC
- FCLHEA
- FCLHEE
- FCLHEG
- FCLHEH
- FCLHFD
- FCLHFG
- FCLHGG
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHH
- FCLSAB
- FCLSAE
- FCLSAG
- FCLSBA
- FCLSCA
- FCLSDA
- FCLSDB
- FCLSEA
- FCLSEB
- FCLSEF
- FCLSEG
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSGF
- FCLSGH
- FCLSHAA
- FCLSHAD
- FCLSHAG
- FCLSHBB
- FCLSHBD
- FCLSHBE
- FCLSHBH
- FCLSHCC
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHDB
- FCLSHDC
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHGH
- FCLSHH
- FCLSHHC
- FCLSHHD
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
Clear
Mounting Method
- Straight
- Retaining Ring
- Cotter Pin
- Lock Nut (Threaded)
- Tapped
- Set Screw (Set Screw Flat, D-Cut)
- Keyway
- Set Screw (V Groove)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Bearings with Housings - Direct Mount, Compact
MISUMI_Test Standard Price : MYR 50.60- Days to Ship : 1 Day(s) or more
Roller Follower Pins - Threaded
MISUMI_Test Days to Ship : 1 Day(s) or more
Timing Pulleys - MXL Type
MISUMI_Test Days to Ship : 3 Day(s) or more
Urethane Rollers - with Collars - Set Screw Hole
MISUMI_Test Standard Price : MYR 44.17- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Pivot Pins - Retaining Ring with Shoulder
MISUMI_Test

Days to Ship : 1 Day(s) or more
Pivot Pins - Lock Nut with Shoulder
MISUMI_Test

Days to Ship : 1 Day(s) or more
Pivot Pins - Straight Retaining Ring
MISUMI_Test

Days to Ship : 1 Day(s) or more
Pivot Pins - Lock Nut with Extra Low Hex Socket Head
MISUMI_Test

Days to Ship : 3 Day(s) or more
Pivot Pins - Lock Nut with Hex Socket Head
MISUMI_Test

Days to Ship : 3 Day(s) or more
Pivot Pins - Diameter Tolerance Selectable
MISUMI_Test

Days to Ship : 6 Day(s) or more
Pivot Pins - Cotter Pins with Shoulder
MISUMI_Test

Days to Ship : 1 Day(s) or more
Pivot Pins - Tapped, Hex Socket Head with Shoulder
MISUMI_Test

Days to Ship : 3 Day(s) or more
Pivot Pins - Tapped with Shoulder
MISUMI_Test

Days to Ship : 3 Day(s) or more
Pivot Pins - Both Ends Tapped
MISUMI_Test

Days to Ship : 3 Day(s) or more
Metal Collar - Flanged, Standard Grade / Precision Grade
MISUMI_Test

Days to Ship : 3 Day(s) or more
Keys for Precision Pivot Pins
MISUMI_Test

Standard Price : MYR 5.89-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Pivot Pins - End Shape Combination Selectable

Part Number

Basic Information

Configure

Specification/Dimensions

Basic Shape

Shaft Dia. D(mm)

Material

Hardness

Surface Treatment

Material Detail

Left End Shape

Right End Shape

G(mm)

GC(mm)

H(mm)

HC(mm)

K(mm)

KC(mm)

L(mm)

M(mm)

MC(mm)

N(mm)

NC(mm)

T(mm)

TC(mm)

Y(mm)

YC(mm)

type

Mounting Method

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm