Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Both Ends Threaded Shafts with Undercut and Cross-Drilled Hole/Wrench Flats:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SAFU	SFFU	-	SFHAM	-	SUJ2	Effective Hardened Depth of Induction Hardening >>P.142 SUJ2: 58HRC~ SUS440C Equivalent: 56HRC~	-
SSAFU	SSFFU	-	SSHAM	-	SUS440C Equivalent		-
PSAFU	PSFFU	-	PSHAM	-	SUJ2		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSAFU	PSSFFU	-	PSSHAM	-	SUS440C Equivalent
RSAFU	-	-	RSHAM	-	SUJ2		Low Temp. Black Chrome Plating
-	-	PSAGU	-	PSHGM	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSAGU	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	M	-	T	-	N	-	SC	-	H
SAFU15 SFHAM15	- -	300 300	- -	F18 F18	- -	M6 M6	- -	T17 T17	- -	N12 N12	-	SC8	-	H8

Part Number			1mm Increments		Selection								Wrench Flats Dimensions			D Tol.			(Y)Max.	C
Type		D	L	F, T	M, N (Coarse)								SC	W	ℓ₁	g6	h5	f8	(Y)Max.	C
		8	25~ 990	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6								SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
(With Wrench Flats) (D Tol. g6) SAFU SSAFU PSAFU PSSAFU (D Tol. f8) PSAGU PSSAGU	(D Tol. h5) SFFU SSFFU PSFFU PSSFFU	10	25~ 990		6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.5 or Less
		12	25~1190		6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		13	25~1190		6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		15	25~1190		6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.5 or Less
		16	25~1190		6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		18	25~1190		6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.5 or Less
		20	25~1190		6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		25	25~1190			8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	1.0 or Less
		30	25~1490			8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	1.0 or Less
		35	25~1490				10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		40	25~1490					12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less
		50	25~1490						16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	1.0 or Less

Part Number		1mm Increments		Selection							Wrench Flats Dimensions			D Tol.	(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							SC	W	ℓ₁	g6	(Y)Max.	C
	8	25~500	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6							SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> P.142	7	8	-0.005 -0.014	800	0.5 or Less
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSAFU (Ymax≤800)	10	25~500		6	8							8	8	-0.005 -0.014	800	0.5 or Less
	12	25~500		6	8	10						10	10	-0.006 -0.017	1000	0.5 or Less
	13	25~500		6	8	10	12					11	10	-0.006 -0.017	1000	0.5 or Less
	15	25~500		6	8	10	12					13	10	-0.006 -0.017	1000	0.5 or Less
	16	25~500		6	8	10	12					14	10	-0.006 -0.017	1200	0.5 or Less
	18	25~500		6	8	10	12	16				16	10	-0.006 -0.017	1200	0.5 or Less
	20	25~500		6	8	10	12	16				17	10	-0.007 -0.020	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		22	10	-0.007 -0.020	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		27	15	-0.007 -0.020	1500	1.0 or Less

Part Number		1mm Increments		Selection							Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							H	d	g6	f8	(Y)Max.	C
(With Cross-Drilled Hole) (D Tol. g6) SFHAM SSHAM PSHAM PSSHAM RSHAM (D Tol. f8) PSHGM [ ! ]D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	10	25~500	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6	8						H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.5 or Less
	12	25~500		6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	13	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	15	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.5 or Less
	16	25~500		6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	18	25~500		6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.5 or Less
	20	25~500		6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	25	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	1.0 or Less
	30	25~500			8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	1.0 or Less

Coarse Thread Undercut Dimensions
M N	Pitch	MC NC	(g)
6	1.0	4.4	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6	5
30	3.5	25.0	5

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]
PSSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-SC[0-782/1]
PSSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-SC[0-782/1]
PSSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1]
PSSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]
PSSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1]
PSSAFU10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]
PSSAFU10-[25-790/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-SC[0-782/1]
PSSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-M[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-N[6,8,10]-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-MMC[6,8,10]-T[5-30/1]-NMS10-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-N[6,8,10]-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMC[6,8,10]-SC[0-980/1]
PSSAFU12-[25-990/1]-F[5-30/1]-MMS10-T[5-30/1]-NMS10-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10]-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS10-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMC[6,8,10]-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-MMC[6,8,10]-T[5-36/1]-NMS10-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMC[6,8,10]-SC[0-980/1]
PSSAFU13-[25-990/1]-F[5-36/1]-MMS10-T[5-36/1]-NMS10-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-980/1]
PSSAFU15-[25-990/1]-F[5-36/1]-MMS[10,12]-T[5-36/1]-NMS[10,12]-SC[0-980/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-M[6,8,10,12]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-N[6,8,10,12]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-MMC[6,8,10,12]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-N[6,8,10,12]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMC[6,8,10,12]-SC[0-1180/1]
PSSAFU16-[25-1190/1]-F[5-36/1]-MMS[10,12,14]-T[5-36/1]-NMS[10,12,14]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-M[6,8,10,12,16]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-MMC[6,8,10,12,15,17]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-N[6,8,10,12,16]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMC[6,8,10,12,15,17]-SC[0-1180/1]
PSSAFU20-[25-1190/1]-F[5-48/1]-MMS[10,12,14,18]-T[5-48/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-N[8,10,12,16,20,24]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMC[8,10,12,15,17,20]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-M[8,10,12,16,20,24]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-N[8,10,12,16,20,24]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMC[8,10,12,15,17,20]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-MMC[8,10,12,15,17,20]-T[5-72/1]-NMS[10,12,14,18]-SC[0-1180/1]
PSSAFU25-[25-1190/1]-F[5-72/1]-MMS[10,12,14,18]-T[5-72/1]-N[8,10,12,16,20,24]-SC[0-1180/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	TEST	Heat Treatment	Surface Treatment	TEST (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	H (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	-	-	-	-	5 ～ 18	-	5 ～ 18	6	6
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	-	-	6	-	5 ～ 18	-	5 ～ 18	6	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	6	-	-	-	5 ～ 18	-	5 ～ 18	-	6
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	6	-	6	-	5 ～ 18	-	5 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	-	-	-	-	5 ～ 24	-	5 ～ 24	6 ～ 8	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	-	-	6 ～ 8	-	5 ～ 24	-	5 ～ 24	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	6 ～ 8	-	-	-	5 ～ 24	-	5 ～ 24	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (56HRC~)	0 ～ 782	6 ～ 8	-	6 ～ 8	-	5 ～ 24	-	5 ～ 24	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	-	-	5 ～ 30	-	5 ～ 30	6 ～ 10	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	6 ～ 10	-	5 ～ 30	-	5 ～ 30	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	-	10	5 ～ 30	-	5 ～ 30	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 10	-	-	-	5 ～ 30	-	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 10	-	6 ～ 10	-	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 10	-	-	10	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10	-	-	5 ～ 30	-	5 ～ 30	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10	6 ～ 10	-	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10	-	10	5 ～ 30	-	5 ～ 30	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	-	-	5 ～ 36	-	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	6 ～ 10	-	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	-	10	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 10	-	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 10	-	6 ～ 10	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 10	-	-	10	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10	6 ～ 10	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10	-	10	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	-	-	5 ～ 36	-	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	-	-	10 ～ 12	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 12	-	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 12	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	6 ～ 12	-	-	10 ～ 12	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10 ～ 12	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10 ～ 12	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (56HRC~)	0 ～ 980	-	10 ～ 12	-	10 ～ 12	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	-	-	5 ～ 36	-	5 ～ 36	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	-	10 ～ 14	5 ～ 36	-	5 ～ 36	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	6 ～ 12	-	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	6 ～ 12	-	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	6 ～ 12	-	-	10 ～ 14	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 14	-	-	5 ～ 36	-	5 ～ 36	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 14	6 ～ 12	-	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 14	-	10 ～ 14	5 ～ 36	-	5 ～ 36	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	-	-	5 ～ 48	-	5 ～ 48	6 ～ 16	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	6 ～ 17	-	5 ～ 48	-	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	-	10 ～ 18	5 ～ 48	-	5 ～ 48	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	6 ～ 17	-	-	-	5 ～ 48	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	6 ～ 17	-	6 ～ 17	-	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	6 ～ 17	-	-	10 ～ 18	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 18	-	-	5 ～ 48	-	5 ～ 48	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 18	6 ～ 17	-	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 18	-	10 ～ 18	5 ～ 48	-	5 ～ 48	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	-	-	5 ～ 72	-	5 ～ 72	8 ～ 24	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	8 ～ 20	-	5 ～ 72	-	5 ～ 72	8 ～ 24	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	-	-	10 ～ 18	5 ～ 72	-	5 ～ 72	8 ～ 24	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	8 ～ 20	-	-	-	5 ～ 72	-	5 ～ 72	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	8 ～ 20	-	8 ～ 20	-	5 ～ 72	-	5 ～ 72	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	8 ～ 20	-	-	10 ～ 18	5 ～ 72	-	5 ～ 72	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (56HRC~)	0 ～ 1180	-	10 ～ 18	-	-	5 ～ 72	-	5 ～ 72	-	8 ～ 24

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	Threaded
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

284 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
TEST(Ø)
8

10

12

13

15

16

20

25

30

50
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1475/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18

500
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18

500
Clear
F(mm)
[5-500/1mm Unit(s)]
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
T(mm)
[5-500/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
type
- PSAFU
- PSAGU
- PSHAM
- PSHGM
- PSSAFU
- PSSHAM
- SAFU
- SFHAM
- SSAFU
- SSHAM
Clear
TEST
- Steel_
  - SUJ2
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel_
  - SUS440C Equivalent
  - SUS440C or 13Cr stainless
- 00030
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI_Test Days to Ship : 3 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI_Test Standard Price : MYR 58.85- Days to Ship : 1 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI_Test Standard Price : MYR 63.56- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI_Test Standard Price : MYR 13.15- Days to Ship : 1 Day(s)

Customers Who Viewed This Item Also Viewed

Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Threaded
MISUMI_Test

Days to Ship : 3 Day(s) or more
Precision Linear Shafts - Both Ends Male Thread with Undercut
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
MISUMI_Test

Days to Ship : 3 Day(s) or more
High Precision Linear Shafts - Both Ends Threaded / Both Ends Threaded with Wrench Flats
MISUMI_Test

Days to Ship : 7 Day(s) or more
High Precision Linear Shafts - Both Ends Threaded with Undercuts / Both Ends Threaded with Undercuts and Wrench Flats
MISUMI_Test

Days to Ship : 7 Day(s) or more
Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s)

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Shafts-Both Ends Threaded with Undercuts and Wrench Flats / Cross-Drilled Hole

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Heat Treatment

Surface Treatment

TEST(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

H(mm)

T(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

TEST

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm