Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole (Part Numbers)

Part Number

Configured Part Number is shown.

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFAS	SFUS	-	SFHN	-	SUJ2	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2: 58HRC~ SUS440C Equivalent: 56HRC~	-
SSFAS	SSFUS	-	SSFHN	-	SUS440C Equivalent		-
PSFAS	PSFUS	-	PSFHN	-	SUJ2		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFAS	PSSFUS	-	PSSFHN	-	SUS440C Equivalent
RSFAS	-	-	RSFHN	-	SUJ2		Low Temp. Black Chrome Plating
-	-	PSFGS	-	PSGHN	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGS	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm).>> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	SC	-	H
SFAS12	-	200	-	F20	-	B15	-	P8	-	SC5
SFHN18	-	450	-	F40	-	B25	-	P12			-	H10

Part Number			1mm Increment			P Selection											Wrench Flats Dimensions			D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P Selection											SC	W	ℓ₁	g6	h5	f8	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) SFAS SSFAS PSFAS PSSFAS (D Tol. f8) PSFGS PSSFGS	(D Tol. h5) SFUS SSFUS PSFUS PSSFUS	6	25~798	2≤F≤Px5	(When P≤6) B≤F-2 (when P=8 or 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]For Details of Wrench Flats, see P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	600	0.3 or Less	0.5 or Less
		8	25~998			3	4	5	6									7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~998				4	5	6	8								8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1198					5	6	8	10							10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1198					5	6	8	10	12						11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1198					5	6	8	10	12						13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1198					5	6	8	10	12						14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1198					5	6	8	10	12	16					16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1198						6	8	10	12	16					17	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1198							8	10	12	16	20	24			22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1498							8	10	12	16	20	24			27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1498								10	12	16	20	24	30		30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1498									12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1498										16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number		1mm Increment			P Selection										Cross-Drilled Hole Dimensions		D Tol.		(Y)Max.	R	C
Type	D	L	F	B	P Selection										H	d	g6	f8	(Y)Max.	R	C
(With Cross-Drilled Hole) (D Tol. g6) SFHN SSFHN PSFHN PSSFHN RSFHN (D Tol. f8) PSGHN [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (when P=8 or 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3	3	4	5	6							H = 1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8							3	-0.005 -0.014	-0.013 -0.035	800	0.3 or Less	0.3 or Less
	12	25~500					5	6	8	10						3	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.3 or Less
	13	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.3 or Less
	15	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1000	0.3 or Less	0.3 or Less
	16	25~500					5	6	8	10	12					4	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.3 or Less
	18	25~500					5	6	8	10	12	16				6	-0.006 -0.017	-0.016 -0.043	1200	0.3 or Less	0.3 or Less
	20	25~500						6	8	10	12	16				6	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24		7	-0.007 -0.020	-0.020 -0.053	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment			P Selection										Wrench Flats Dimensions			D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P Selection										SC	W	ℓ₁	g6	(Y)Max.	R	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFAS	6	25~500	2≤F≤Px5	(When P≤6) B≤F-2 (when P=8 or 10) B≤F-3 (When P≥12) B≤F-5 [ ! ]B≥Pitchx3	3	4	5								SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]For Details of Wrench Flats, see P.142	5	8	-0.004 -0.012	600	0.3 or Less	0.5 or Less
	8	25~500			3	4	5	6								7	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				4	5	6	8							8	8	-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500					5	6	8	10						10	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500					5	6	8	10	12					11	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500					5	6	8	10	12					13	10	-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500					5	6	8	10	12					14	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500					5	6	8	10	12	16				16	10	-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500						6	8	10	12	16				17	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500							8	10	12	16	20	24		22	10	-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500							8	10	12	16	20	24		27	15	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Coarse Thread Dimension
M	pitch
3	0.5
4	0.7
5	0.8
6	1.0
8	1.25
10	1.5
12	1.75
16	2.0
20	2.5
24	3.0
30	3.5

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]-SC[0-990/1]
SFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10,12]-SC[0-990/1]
SFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12,15]-SC[0-990/1]
SFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,12,14]-SC[0-990/1]
SFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12,16]-SC[0-1190/1]
SFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15]-SC[0-1190/1]
SFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14]-SC[0-1190/1]
SFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-P[6,8,10,12,16,20]-SC[0-1190/1]
SFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMC[6,8,10,12,15,17,20]-SC[0-1190/1]
SFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMS[10,12,14,18]-SC[0-1190/1]
SFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-P[8,10,12,16,20,24]-SC[0-1190/1]
SFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMC[8,10,12,15,17,20,25]-SC[0-1190/1]
SFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMS[10,12,14,18]-SC[0-1190/1]
SFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,10,12,16,20,24]-SC[0-1485/1]
SFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,10,12,15,17,20,25,30]-SC[0-1485/1]
SFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]-SC[0-1485/1]
SFHN8-[25-500/1]-F[2-30/1]-B[2-28/1]-P[3,4,5,6,8]-H[0-496/1]
SFHN8-[25-500/1]-F[2-30/1]-B[2-28/1]-PMC[3,4,5,6,8]-H[0-496/1]
SFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-P[4,5,6,8,10]-H[0-496/1]
SFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMC[4,5,6,8,10]-H[0-496/1]
SFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMS10-H[0-496/1]
SFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-P[5,6,8,10,12]-H[0-496/1]
SFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMC[5,6,8,10,12]-H[0-496/1]
SFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMS[10,12]-H[0-496/1]
SFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-H[0-496/1]
SFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12]-H[0-496/1]
SFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12]-H[0-496/1]
SFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-H[0-496/1]
SFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12,15]-H[0-496/1]
SFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12,14]-H[0-496/1]
SFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12,16]-H[0-496/1]
SFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12,15]-H[0-496/1]
SFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12,14]-H[0-496/1]
SFHN20-[25-500/1]-F[2-80/1]-B[2-78/1]-P[6,8,10,12,16,20]-H[0-495/1]
SFHN20-[25-500/1]-F[2-80/1]-B[2-78/1]-PMC[6,8,10,12,15,17,20]-H[0-495/1]
SFHN20-[25-500/1]-F[2-80/1]-B[2-78/1]-PMS[10,12,14,18]-H[0-495/1]
SFHN25-[25-500/1]-F[2-120/1]-B[2-117/1]-P[8,10,12,16,20,24]-H[0-494/1]
SFHN25-[25-500/1]-F[2-120/1]-B[2-117/1]-PMC[8,10,12,15,17,20,25]-H[0-494/1]
SFHN25-[25-500/1]-F[2-120/1]-B[2-117/1]-PMS[10,12,14,18]-H[0-494/1]
SFHN30-[25-500/1]-F[2-120/1]-B[2-117/1]-P[8,10,12,16,20,24,30]-H[0-494/1]
SFHN30-[25-500/1]-F[2-120/1]-B[2-117/1]-PMC[8,10,12,15,17,20,25,30]-H[0-494/1]
SFHN30-[25-500/1]-F[2-120/1]-B[2-117/1]-PMS[10,12,14,18]-H[0-494/1]
SSFAS6-[25-598/1]-F[2-42/1]-B[2-42/1]-P[3,4,5,6]-SC[0-592/1]
SSFAS6-[25-598/1]-F[2-42/1]-B[2-42/1]-PMC[3,4,5,6]-SC[0-592/1]
SSFAS8-[25-798/1]-F[2-56/1]-B[2-55/1]-P[3,4,5,6,8]-SC[0-592/1]
SSFAS8-[25-798/1]-F[2-56/1]-B[2-55/1]-PMC[3,4,5,6,8]-SC[0-592/1]
SSFAS10-[25-798/1]-F[2-70/1]-B[2-70/1]-P[4,5,6,8,10]-SC[0-792/1]
SSFAS10-[25-798/1]-F[2-70/1]-B[2-70/1]-PMC[4,5,6,8,10]-SC[0-792/1]
SSFAS10-[25-798/1]-F[2-70/1]-B[2-70/1]-PMS10-SC[0-792/1]
SSFAS12-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10,12]-SC[0-990/1]
SSFAS12-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12]-SC[0-990/1]
SSFAS12-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,12]-SC[0-990/1]
SSFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-P[5,6,8,10,12]-SC[0-990/1]
SSFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-PMC[5,6,8,10,12]-SC[0-990/1]
SSFAS13-[25-998/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]-SC[0-990/1]
SSFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10,12]-SC[0-990/1]
SSFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12,15]-SC[0-990/1]
SSFAS15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,12,14]-SC[0-990/1]
SSFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12,16]-SC[0-1190/1]
SSFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15]-SC[0-1190/1]
SSFAS16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14]-SC[0-1190/1]
SSFAS18-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12,16]-SC[0-1190/1]
SSFAS18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15,17]-SC[0-1190/1]
SSFAS18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14,18]-SC[0-1190/1]
SSFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-P[6,8,10,12,16,20]-SC[0-1190/1]
SSFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMC[6,8,10,12,15,17,20]-SC[0-1190/1]
SSFAS20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMS[10,12,14,18]-SC[0-1190/1]
SSFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-P[8,10,12,16,20,24]-SC[0-1190/1]
SSFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMC[8,10,12,15,17,20,25]-SC[0-1190/1]
SSFAS25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMS[10,12,14,18]-SC[0-1190/1]
SSFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,10,12,16,20,24]-SC[0-1485/1]
SSFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,10,12,15,17,20,25,30]-SC[0-1485/1]
SSFAS30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]-SC[0-1485/1]
SSFHN8-[25-500/1]-F[2-30/1]-B[2-28/1]-P[3,4,5,6,8]-H[0-496/1]
SSFHN8-[25-500/1]-F[2-30/1]-B[2-28/1]-PMC[3,4,5,6,8]-H[0-496/1]
SSFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-P[4,5,6,8,10]-H[0-496/1]
SSFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMC[4,5,6,8,10]-H[0-496/1]
SSFHN10-[25-500/1]-F[2-40/1]-B[2-38/1]-PMS10-H[0-496/1]
SSFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-P[5,6,8,10,12]-H[0-496/1]
SSFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMC[5,6,8,10,12]-H[0-496/1]
SSFHN12-[25-500/1]-F[2-50/1]-B[2-48/1]-PMS[10,12]-H[0-496/1]
SSFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-H[0-496/1]
SSFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12]-H[0-496/1]
SSFHN13-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12]-H[0-496/1]
SSFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12]-H[0-496/1]
SSFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12,15]-H[0-496/1]
SSFHN15-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12,14]-H[0-496/1]
SSFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-P[5,6,8,10,12,16]-H[0-496/1]
SSFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-PMC[5,6,8,10,12,15]-H[0-496/1]
SSFHN16-[25-500/1]-F[2-60/1]-B[2-58/1]-PMS[10,12,14]-H[0-496/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	TEST	Heat Treatment	Surface Treatment	TEST (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	H (mm)	P (mm)
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 990	0 ～ 79	2 ～ 84	-	10 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	-	-	-	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	5 ～ 15	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (58HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	-	10 ～ 14	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 107	2 ～ 112	-	-	-	5 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 107	2 ～ 112	5 ～ 15	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 107	2 ～ 112	-	10 ～ 14	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 135	2 ～ 140	-	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 135	2 ～ 140	6 ～ 20	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 135	2 ～ 140	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 163	2 ～ 120	-	-	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 163	2 ～ 120	8 ～ 25	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (58HRC~)	0 ～ 1190	0 ～ 163	2 ～ 120	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 205	2 ～ 210	-	-	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 205	2 ～ 210	8 ～ 30	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (58HRC~)	0 ～ 1485	0 ～ 205	2 ～ 210	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 28	2 ～ 30	-	-	0 ～ 496	3 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 28	2 ～ 30	3 ～ 8	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	-	0 ～ 496	4 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	4 ～ 10	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 38	2 ～ 40	-	10	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	-	0 ～ 496	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	5 ～ 12	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 48	2 ～ 50	-	10 ～ 12	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 12	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 12	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 15	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 14	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 15	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 14	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	2 ～ 80	-	-	0 ～ 495	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	2 ～ 80	6 ～ 20	-	0 ～ 495	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	20	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 78	2 ～ 80	-	10 ～ 18	0 ～ 495	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	2 ～ 120	-	-	0 ～ 494	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	2 ～ 120	8 ～ 25	-	0 ～ 494	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	25	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	2 ～ 120	-	10 ～ 18	0 ～ 494	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	2 ～ 120	-	-	0 ～ 494	8 ～ 30
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	2 ～ 120	8 ～ 30	-	0 ～ 494	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	30	25 ～ 500	g6	Induction Hardened (58HRC~)	-	0 ～ 117	2 ～ 120	-	10 ～ 18	0 ～ 494	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	6	25 ～ 598	g6	Induction Hardened (56HRC~)	0 ～ 592	0 ～ 42	2 ～ 42	-	-	-	3 ～ 6
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	6	25 ～ 598	g6	Induction Hardened (56HRC~)	0 ～ 592	0 ～ 42	2 ～ 42	3 ～ 6	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 592	0 ～ 55	2 ～ 56	-	-	-	3 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 592	0 ～ 55	2 ～ 56	3 ～ 8	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 792	0 ～ 70	2 ～ 70	-	-	-	4 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 792	0 ～ 70	2 ～ 70	4 ～ 10	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 798	g6	Induction Hardened (56HRC~)	0 ～ 792	0 ～ 70	2 ～ 70	-	10	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	-	-	-	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	5 ～ 12	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	-	10 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 79	2 ～ 84	-	-	-	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 79	2 ～ 84	5 ～ 12	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 79	2 ～ 84	-	10 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	-	-	-	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	5 ～ 15	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 998	g6	Induction Hardened (56HRC~)	0 ～ 990	0 ～ 84	2 ～ 84	-	10 ～ 14	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 107	2 ～ 112	-	-	-	5 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 107	2 ～ 112	5 ～ 15	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 107	2 ～ 112	-	10 ～ 14	-	-
-	1 Piece(s)	4 Day(s) or more	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	2 ～ 107	2 ～ 112	-	-	-	5 ～ 16
-	1 Piece(s)	4 Day(s) or more	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	2 ～ 107	2 ～ 112	5 ～ 17	-	-	-
-	1 Piece(s)	4 Day(s) or more	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	18	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	2 ～ 107	2 ～ 112	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 135	2 ～ 140	-	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 135	2 ～ 140	6 ～ 20	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	20	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 135	2 ～ 140	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 163	2 ～ 120	-	-	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 163	2 ～ 120	8 ～ 25	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	25	25 ～ 1198	g6	Induction Hardened (56HRC~)	0 ～ 1190	0 ～ 163	2 ～ 120	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (56HRC~)	0 ～ 1485	0 ～ 205	2 ～ 210	-	-	-	8 ～ 24
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (56HRC~)	0 ～ 1485	0 ～ 205	2 ～ 210	8 ～ 30	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	30	25 ～ 1498	g6	Induction Hardened (56HRC~)	0 ～ 1485	0 ～ 205	2 ～ 210	-	10 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 28	2 ～ 30	-	-	0 ～ 496	3 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	8	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 28	2 ～ 30	3 ～ 8	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 38	2 ～ 40	-	-	0 ～ 496	4 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 38	2 ～ 40	4 ～ 10	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	10	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 38	2 ～ 40	-	10	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 48	2 ～ 50	-	-	0 ～ 496	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 48	2 ～ 50	5 ～ 12	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	12	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 48	2 ～ 50	-	10 ～ 12	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 12	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	13	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 12	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 15	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	15	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 14	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	-	-	0 ～ 496	5 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	5 ～ 15	-	0 ～ 496	-
-	1 Piece(s)	3 Day(s)	-	[Stainless Steel_] SUS440C Equivalent / [Stainless Steel_] SUS440C or 13Cr stainless	Induction Hardened	Not Provided	16	25 ～ 500	g6	Induction Hardened (56HRC~)	-	0 ～ 58	2 ～ 60	-	10 ～ 14	0 ～ 496	-

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Threaded	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

279 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

TEST
- Steel_
  - SUJ2
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel_
  - SUS304
  - SUS440C Equivalent
  - SUS440C or 13Cr stainless
- 00030
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
TEST(Ø)
6

8

10

12

13

15

16

18

20

25

30
Clear
Length L(mm)
[25-1498/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1485/1mm Unit(s)]
Clear
B(mm)
[2-205/1mm Unit(s)]
Clear
F(mm)
[2-210/1mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
P(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
type
- PSFAS
- PSFGS
- PSFHN
- PSGHN
- PSSFAS
- PSSFGS
- PSSFHN
- SFAS
- SFHN
- SSFAS
- SSFHN
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI_Test Days to Ship : 3 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI_Test Standard Price : MYR 58.85- Days to Ship : 1 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI_Test Standard Price : MYR 63.56- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI_Test Standard Price : MYR 13.15- Days to Ship : 1 Day(s)

Customers Who Viewed This Item Also Viewed

Linear Shafts-One End Threaded
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Threaded with Undercut and Wrench Flats / Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s)
Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Threaded
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Threaded One End Tapped
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts One End Threaded with Undercut
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Stepped and Female Thread-
MISUMI_Test

Days to Ship : 3 Day(s)
Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Threaded
MISUMI_Test

Days to Ship : 3 Day(s) or more
TESTCASE11
MISUMI_Test

Days to Ship : 3 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole (Part Numbers)

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

TEST

Heat Treatment

Surface Treatment

TEST(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

H(mm)

P(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm