(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Sprockets-Single Strand/Double Strand/50SD Series
- Volume Discount
Sprockets intended to transmit the power to two chains. Can be used for the multi-shaft drive mechanism.
Part Number
Configured Part Number is shown.
| Shaft Bore Dia. D | Keyway b2xt2 | Set Screw M |
| 15 | 5x2.3 | 6 |
| 18, 20 | 6x2.8 | 6 |
| 25~30 | 8x3.3 | 8 |
| 35 | 10x3.3 | 8 |
| 40 | 12x3.3 | 8 |
| Type | [ M ] Material |
| SP50SD | S45C Equivalent (Induction Hardened Teeth Tip) |
Specifications
| Part Number | - | Bore Spec. | - | Bore Dia. |
| SP50SD15 | - | N | - | 25 |
| Part Number | Shaft Bore Specs. | Shaft Bore Dia. | Dp | Do | H | L | X | Y | Mass (kg) | Compliance with Standard | |||||||||||
| Type | Number of Teeth | S Specification (DH8) | N (DH7)Products with the shaft bore dia. marked with * are in Stock. | S Specification | N Spec. (In Stock) | N Spec. (Other than In Stock) | |||||||||||||||
| SP50SD | 12 | S N | 13 | 18 | 20 | 61.34 | 69 | 43 | 40 | 8.7 | 31.3 | 0.63 | ● | - | ● | ||||||
| 13 | 13 | 20* | 25* | 28 | 66.34 | 74 | 48 | 40 | 8.7 | 31.3 | 0.75 | ● | ● | ● | |||||||
| 14 | 13 | 20 | 25 | 28 | 30 | 71.34 | 79 | 53 | 40 | 8.7 | 31.3 | 0.9 | ● | - | ● | ||||||
| 15 | 13 | 20 | 25* | 28 | 30 | 35 | 76.35 | 84 | 58 | 40 | 8.7 | 31.3 | 1.04 | ● | ● | ● | |||||
| 16 | 13 | 25 | 28 | 30 | 35 | 40 | 81.37 | 89 | 63 | 40 | 8.7 | 31.3 | 1.22 | ● | - | ● | |||||
| 17 | 13 | 25 | 28 | 30 | 35 | 40 | 86.39 | 94 | 68 | 40 | 8.7 | 31.3 | 1.41 | ● | - | ● | |||||
| 18 | 13 | 25 | 28 | 30* | 35 | 40 | 91.42 | 100 | 73 | 40 | 8.7 | 31.3 | 1.61 | ● | ● | ● | |||||
| 19 | 16 | 25 | 28 | 30 | 35 | 40 | 96.45 | 105 | 79 | 40 | 8.7 | 31.3 | 1.8 | ● | - | ● | |||||
| 20 | 16 | 25 | 28 | 30 | 35 | 40 | 101.48 | 110 | 84 | 40 | 8.7 | 31.3 | 1.95 | ● | - | ● | |||||
| 21 | 16 | 28 | 30 | 35 | 40 | 106.51 | 115 | 89 | 40 | 8.7 | 31.3 | 2.27 | ● | - | ● | ||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| SP50SD13-N-[20,25,28] |
| SP50SD15-N-[20,25,28,30,35] |
| SP50SD15-S-13 |
| SP50SD16-N-[25,28,30,35,40] |
| SP50SD17-N-[25,28,30,35,40] |
| SP50SD18-N-[25,28,30,35,40] |
| SP50SD19-N-[25,28,30,35,40] |
| SP50SD20-N-[25,28,30,35,40] |
| SP50SD21-N-[28,30,35,40] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Number of Teeth (T) | Number of Strands | Shaft Bore Dia. D (or d) (mm) | Type | Shaft Type | Bore Specification |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 4 Day(s) or more | 10 | 13 | [2] Double Strand | 20 ～ 28 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
- | 1 Piece(s) | 4 Day(s) or more | - | 15 | [2] Double Strand | 20 ～ 35 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
MYR 59.28 | 1 Piece(s) | Available | 4 Day(s) or more | - | 15 | [1] Single Strand | - | Pilot Bore Type | Standard Pilot Bore | S (Pilot Bore) | |
- | 1 Piece(s) | 4 Day(s) or more | - | 16 | [2] Double Strand | 25 ～ 40 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
- | 1 Piece(s) | 4 Day(s) or more | - | 17 | [2] Double Strand | 25 ～ 40 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
- | 1 Piece(s) | 4 Day(s) or more | - | 18 | [2] Double Strand | 25 ～ 40 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
- | 1 Piece(s) | 4 Day(s) or more | - | 19 | [2] Double Strand | 25 ～ 40 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
- | 1 Piece(s) | 4 Day(s) or more | - | 20 | [2] Double Strand | 25 ～ 40 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) | ||
- | 1 Piece(s) | 4 Day(s) or more | - | 21 | [2] Double Strand | 28 ～ 40 | Shaft Bore Machined Type | Shaft Bore Machining Configurable | N (Keyway + Tap) |
Loading...
More Information
Example
Basic Information
| Sprocket Shape | Shape SD | Nominal | 50 | Material | S45C (Induction Hardened Teeth Tip) |
|---|---|---|---|---|---|
| Chain Type | RS | Surface Treatment | Not Provided |
Specification/Dimensions
-
Number of Teeth(T)
-
Number of Strands
- 1
- 2
- 1
-
Shaft Bore Dia. D (or d)(mm)
-
Type
- Pilot Bore Type
- Shaft Bore Machined Type
-
Shaft Type
- Standard Pilot Bore
- Shaft Bore Machining Configurable
-
Bore Specification
- N (Keyway + Tap)
- S (Pilot Bore)
-
type
- SP50SD
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Sprockets-25B Series
- Sprockets-11B Series
- FBN40B finished bore sprocket
- FBN50SD finished bore sprocket
- Standard Sprocket - 100B - C type - Semi F Series - Shaft Holes Machined (New JIS Key)
- Standard Sprocket, NK35-2B Form, Semi F Series, Shaft Holes Already Established (New JIS Key)
- Standard 2050 Double Pitch Sprocket, S Roller B Type, Semi F Series, Shaft Holes Already Established (New JIS Key)
- Stainless steel sprocket type 60B semi F Series, shaft bore machined (new JIS key)
Complementary Products
-
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI_Test Days to Ship : 3 Day(s) or more
-
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI_Test Days to Ship : 5 Day(s) or more
-
Idler Sprockets - Single Bearing, Double Bearing
MISUMI_Test Standard Price : MYR 49.43- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
-
-
Sprockets for Block Chains-SteelMISUMI_Test
Standard Price : MYR 138.89
Days to Ship : 4 Day(s) or more
-
-
50SD single/double sprocket semi F series with machined shaft holes (New JIS key)KATAYAMA CHAIN
Standard Price : MYR 350.91-
Days to Ship : 7 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy