(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
EMI Countermeasures Cable/Slim-model Connector
Harness using connectors made by Japanese manufacturers
- Space-saving
- PLC
- Flexible
- EMI Countermeasure
- RS232
- Solder
- Gold Plated
- Small Diameter
● Hardly interferes with other equipment as the hood is thin.
● Wiring is easy thanks to narrow and soft cables with diameter thinness 35% that of conventional cables.
● By taking advantage of the free alteration / custom number, simple customized connection changes and mark tube printing etc. can be performed.
· Please use within a range of 15 m or less if used in RS-232C communication.
· Small diameter cables support 30V.
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· Specifying the length of the connector side ground cable is not supported.
Wiring and Wire Color Page >>Click here
Component Page >>Click here
Part Number
Configured Part Number is shown.
NDDU-SS-E-25-[0.2-50/0.1]
Specifications
| Connector Type | Shape Specification Type | Outline Image Drawing | Cable Type | Number of Cores | Specified Length (m) |
| NDDJ EMI Countermeasure M2.6 Short Screw DDK NDDU EMI Countermeasure #4-40 Short Screw DDK | P (Male) |  |  | 9 | 0.2 ~ 50 Can be specified by 0.1m increments |
| 15 | |||||
| 25 | |||||
| 37 | |||||
| S (Female) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PP (Male / Male) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| SS (Female / Female) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PS (Male / Female) |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| NDDJ EMI Countermeasure M2.6 Short Screw DDK NDDU EMI Countermeasure #4-40 Short Screw DDK | PY (Male / Y Terminal) With Pin No. Insertion Mark Tube |  |  | 9 | 0.2 ~ 50 Can be specified by 0.1m increments |
| 15 | |||||
| 25 | |||||
| 37 | |||||
| SY (Female / Y Terminal) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PT (Male / Loose Wires) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| ST (Female / Loose Wires) With Pin No. Insertion Mark Tube |  | 9 | |||
| 15 | |||||
| 25 | |||||
| 37 | |||||
| PU (Male / Fusion) |  | 9 | 1 ~ 50 Can be specified by 0.1m increments | ||
| 15 | |||||
| 25 | |||||
| 37 |
| Part Number |
|---|
| NDDU-SS-E-25-[0.2-50/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Hood screw | CN1 | CN2 | Number Of Cores | Cable rated voltage (V) | Shield | Cable color | Cable type | Specified Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) or more | #4-40 Short screw | Female | Female | 25 | 300 | 1 Layer | Navy | E | 0.2 ～ 50 |
Loading...
Compatible Wire Size
| Connector Type | Compatible Wire Size | ||
|---|---|---|---|
| AWG Size | Conductor Cross-Sectional Area (mm2) | ||
| Solder Connection Type | Finer than 20 | Less than 0.53 | |
| Pressure Weld Connection Type | 1.27 mm Pitch 28 Flat Cable | − | |
| High-density Solder Connection Type | 22 ~ 28 | 0.08 ~ 0.32 | |
| Terminal Block Built in Type | 14 ~ 26 | 2.0 ~ 1.5 | |
| High Current Type | For 10A | 16 ~ 12 | 0.3 ~ 1.25 |
| For 20A | 12 ~ 18 | 0.75 ~ 3.5 | |
・ When mounting a hood, the wires in the table at left may not be usable, depending on the cable extraction port diameter. Use with due attention to the cable finished outer diameter, etc.
Panel Size
Solder Connection / Pressure Weld Connection Type
● Dimension Table
| Number of Cores | A±0.15 | B±0.2 | C±0.2 | ||
|---|---|---|---|---|---|
| High Current Type | High-density type | Others | |||
| - | 15 | 9 | 24.99 | 20.6 | 12.0 |
| 3 | 26 | 15 | 33.32 | 28.8 | 12.0 |
| 5 | 44 | 25 | 47.04 | 42.6 | 12.0 |
| 8 | 62 | 37 | 63.50 | 59.0 | 12.0 |
| - | 78 | 50 | 61.11 | 56.6 | 15.2 |
Mounting holes for panel front and rear mounting are common.
Pressure Weld Connection Type
a. Dimensions when mounting the connector from panel front
● Dimension Table
| Number of Cores | A1 | B1 |
|---|---|---|
| 9 | 24.99 | 22.00 |
| 15 | 33.32 | 30.30 |
| 25 | 47.04 | 44.00 |
| 37 | 63.05 | 60.50 |
b. Dimensions when mounting the connector from panel rear
● Dimension Table
| Number of Cores | A2 | B2 |
|---|---|---|
| 9 | 24.99 | 20.20 |
| 15 | 33.32 | 28.60 |
| 25 | 47.04 | 42.50 |
| 37 | 63.05 | 59.20 |
Contact Arrangement Diagram
| Shell Size Group | E | A | B | C | D |
|---|---|---|---|---|---|
| Standard Type |  |
 |
 |
 |
 |
| High-density type |  |
 |
 |
 |
 |
Basic Information
| Connector type | Dsub | Connector manufacturer | DDK Ltd. | Connector Shape | Straight |
|---|---|---|---|---|---|
| Machining Method | Solder | Cable shape | Circular | Hood | EMI-compatible plastic |
| Cable standard (UL/CSA) | UL | Twisted pair | Included | AWG | 28 |
| Environment resistant | N/A | Bend tolerant | N/A |
Specification/Dimensions
-
Hood screw
- M2.6 short screw
- #4-40 Short screw
-
CN1
- Male
- Female
-
Number Of Cores
-
Cable rated voltage(V)
- 30
- 300
-
Shield
- 1 Layer
- 2 Layer
-
Cable color
- Black
- Navy
-
Cable type
- E
- SB
-
Specified Length(m)
-
CN2
- Male
- Female
- Discrete wire
- Cut off
-
CAD
- 2D
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Loose Wire with Hood Angle
- Female Free Wire without Hood (Keyence Pin Sequence), KV Nano not supported
- Molded Connector
- Serial Discrete Wire Cable with D-Sub Hooded Connector (with DDK Connectors)
- MIL Connector Round Cable (with Hirose Electric Connectors)
- IEEE1284 (MDR) Round Cable (with 3M Connectors)
- Slim Press-fit Connector
- MIL Socket Connector Harness (Flat Cable)
Customers Who Viewed This Item Also Viewed
-
-
-
General Purpose EMI Countermeasures Cable/Slim-model Connector
MISUMI_Test
Days to Ship : 3 Day(s) or more
-
-
-
-
-
-
-
EMI Countermeasures D-Sub Connector with Resin HoodMISUMI_Test
Standard Price : MYR 9.63-
Days to Ship : 1 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy