(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Used By Fastening Onto Conduit


Part Number
Configured Part Number is shown.
CE05-6A32-17PD-D

| Series Name | Model | Contact Shape | Number of Cores | Arrangement No. | Shell Size | Weight |
| CE05 Series | CE05-6A18-10PD-D | Male | 4 | 18-10 | 18 | 33.4 |
| CE05-6A20-4PD-D | 4 | 20-4 | 20 | 36.1 | ||
| CE05-6A20-15PD-D | 7 | 20-15 | 39 | |||
| CE05-6A22-22PD-D | 4 | 22-22 | 22 | 50.8 | ||
| CE05-6A22-23PD-D | 8 | 22-23 | 46.7 | |||
| CE05-6A32-17PD-D | 4 | 32-17 | 32 | 151.2 | ||
| CE05-6A10SL-3SC-D | Female | 3 | 10SL-3 | 10SL | 11.7 | |
| CE05-6A14S-2SD-D | 4 | 14S-2 | 14S | 20.2 | ||
| CE05-6A18-10SD-D | 4 | 18-10 | 18 | 45.5 | ||
| CE05-6A18-12SD-D | 6 | 18-12 | 46.5 | |||
| CE05-6A20-4SD-D | 4 | 20-4 | 20 | 52.1 | ||
| CE05-6A20-15SD-D | 7 | 20-15 | 55.8 | |||
| CE05-6A20-18SDE-D | 9 | 20-18 | 58.3 | |||
| CE05-6A22-22SD-D | 4 | 22-22 | 22 | 71.3 | ||
| CE05-6A22-23SD-D | 8 | 22-23 | 68.5 | |||
| CE05-6A24-10SD-D | 7 | 24-10 | 24 | 92.5 | ||
| CE05-6A24-10SG-D | 7 | 24-10 (G) | 92.5 | |||
| CE05-6A24-11SGH-D | 9 | 24-11 | 88.8 | |||
| CE05-6A32-17SD-D | 4 | 32-17 | 32 | 141.5 | ||
| JL04V Series | JL04V-6A18-10SE-R | Female | 4 | 18-10 | 18 | 39 |
| JL04V-6A18-12SE-R | 6 | 18-12 | 18 | 39 | ||
| JL04V-6A20-4SE-R | 4 | 20-4 | 20 | 42 | ||
| JL04V-6A22-22SE-R | 4 | 22-22 | 22 | 63 | ||
| JL04V-6A22-23SE-R | 8 | 22-23 | 22 | 62 | ||
| JL04V-6A24-10SE-R | 7 | 24-10 | 24 | 81 | ||
| JL04V-6A24-10SEG-R | 7 | 24-10(G) | 24 | 200 | ||
| JL04V-6A24-11SE-R | 9 | 24-11 | 24 | 81 | ||
| JL04V-6A28-11SE-R | 22 | 28-11 | 28 | 100 |
| Part Number |
|---|
| CE05-6A32-17PD-D |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Applicable pin/contact | Allowable Current (A) | Shell size | Allowable current for the entire connector (A) |
|---|---|---|---|---|---|---|---|---|
MYR 531.29 | 1 Piece(s) | Available | 5 Day(s) or more | Male (plug) | 80 | 32 | 217.6 |
Loading...
Protection Circuit Connection Structural Diagram

Material / Finish
| Item | Materials | Finish | |
|---|---|---|---|
| Shell (Body) | Aluminum Alloy | Zinc-plated Black Chromate Treatment | |
| Insulator | Panel Mount Male Front Side | Silicone Rubber | Black |
| Panel Mount Male Rear Side | Synthetic Resin (UL94V-0) | ||
| Male Connector Front / Rear Side | |||
| Female Front / Rear Side | |||
| Contact | Copper Alloy | Silver Plating | |
| Gasket (Connector Portion) | Nitrile Rubber | Black | |
| O-ring Gasket (Back Shell Portion) | Nitrile Rubber | Black | |
| Retainer Ring | Copper Alloy | Trivalent Black Chromate Treatment | |
| Coupling Nut | Aluminum Alloy (JL04V is Steel) | Trivalent Black Chromate Treatment | |
| Earth Lug | Copper Alloy | Silver Plated (JL04V is Nickel Plated) | |
| Cable Clamp | Aluminum Alloy | Trivalent Black Chromate Treatment | |
| Rubber Bushing | Chloroprene Rubber (JL04V Nitrile Rubber) | Black | |
| Rear Gasket (Note 1) | Silicone Rubber | Black | |

Electrical Properties
| Item | Characteristics | |||
|---|---|---|---|---|
| Contact Size | Current | |||
| Rated Current (Per 1 Contact) |
#4 | 80 A or lower | ||
| #8 | 46 A or lower | |||
| #12 | 23 A or lower | |||
| #16 | 13 A or lower | |||
| Rated Voltage | Refer to Contact Arrangement Table | |||
| Withstand Voltage | Refer to Contact Arrangement Table | |||
| Insulation Resistance | 5,000 MΩ or more at 500 VDC | |||
| Contact Resistance (Steady-state Level, Initial) |
Contact Size |
Compatible Wire Size (AWG) |
Test Current Amps |
Contact Resistance mΩ or less |
| #4 | 4 | 80 | 1 | |
| 6 | 60 | 1 | ||
| 8 | 46 | 1 | ||
| #8 | 8 | 57 | 2 | |
| 10 | 46 | 2 | ||
| 12 | 33 | 2 | ||
| #12 | 12 | 23 | 2 | |
| 14 | 17 | 3 | ||
| 16 | 13 | 4 | ||
| #16 | 16 | 13 | 4 | |
| 18 | 10 | 7 | ||
| 20 | 7.5 | 8 | ||
| 22 | 5 | 15 | ||
| 24 | 3 | 15 | ||
Compatible Wire
| Contact | Applicable Electric Wire | ||
|---|---|---|---|
| Size | Minimum Solder Cup Inner Diameter (Note 2) |
Conductor Cross-sectional Area | AWG Size |
| #4 | φ7.5 mm | 22.0 mm2 | #6 ~ #4 |
| #8 | φ4.7 mm | 8.0 mm2 | #10 ~ #8 |
| #12 | φ2.7 mm | 3.5 mm2 | #14 ~ #12 |
| #16 | φ1.76 mm | 1.25 mm2 | #22 ~ #16 |
Mechanical Properties
| Operating Temperature Range | -55°C ~ +125°C |
|---|---|
| Waterproofing | IP67 Equivalent |
| Airtightness (Panel Mount Male) (Note 3) | 2.9 x 104 Pa (0.3 kgf/cm2), 1 minute |
| Service Life | 500 Insertions and Removals |
Panel Cut Size Drawing

| Compatible Shell Size | φA (mm) | φB (mm) +0.2 -0 |
C (mm) |
|---|---|---|---|
| 10SL | 19.0 | 3.1 | 18.26 |
| 14S | 24.0 | 3.1 | 23.01 |
| 18 | 30.2 | 3.1 | 26.97 |
| 20 | 33.4 | 3.1 | 29.36 |
| 22 | 36.6 | 3.1 | 31.75 |
| 24 | 39.7 | 3.8 | 34.92 |
| 28 | 46.1 ±0.5 | 3.8 | 39.67 ±0.13 |
| 32 | 51.0 | 4.5 | 44.45 |
Combination Method

Contact Arrangement Table

| Connector Shape | Circular Type | Connector series initials | A・B・C | A· B· C | CE05 |
|---|---|---|---|---|---|
| Number Of Pins | 4 | Application | Cable to cable | Allowable Voltage(V) | 250 |
| Wire connection method | Solder | Connection direction | Straight | Protection function (environmentally resistant) | Present |
| Representative Standard | UL / TUV | Other standards (MIL) | ○ | Ground terminal number | D Terminal |
| Removal method | Others |
MISUMI_Test
Standard Price : MYR 112.77-
Days to Ship : 1 Day(s) or more
MISUMI_Test
Standard Price : MYR 177.46
Days to Ship : 1 Day(s)

DDK
Standard Price : MYR 108.16-
Days to Ship : 1 Day(s) or more


JAPANAVIATION
Standard Price : MYR 248.19-
Days to Ship : 2 Day(s) or more
MISUMI_Test
Standard Price : MYR 168.64-
Days to Ship : 2 Day(s) or more

DDK
Standard Price : MYR 48.04-
Days to Ship : 1 Day(s) or more
MISUMI_Test
Standard Price : MYR 75.71-
Days to Ship : 1 Day(s) or more

MISUMI_Test
Standard Price : MYR 187.89-
Days to Ship : 2 Day(s) or more

DDK
Standard Price : MYR 225.77-
Days to Ship : 1 Day(s)


DDK
Standard Price : MYR 132.38
Days to Ship : 1 Day(s)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy