Connector assembly is performed in the following order.
(1) Pass the cable through the cord bushing and connector body, and then solder to the insulator unit contact.
(2) After soldering the wire to the connector, crimp the clamp brackets attached to the connector with the crimp tool (HR10A-TC-02) or pliers.
(3) Fit the insulator unit screw part into the connector body. (Use a wrench and tighten to the values shown in the table.) When tightening the connector body, loosen the D part first so that the solder connection part is not placed under stress.
(4) Tighten the fastening screw so that its tip touches one of the two bosses on the clamp bracket. Note that the fastening screw is fixed with tightening torque of 0.3 N⋅m (3 kgf⋅cm).
(5) Finally, cover the the cord bushing with the connector body.
(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
HR10A Connector Straight Harness
A best-selling product that can be used in sensors, etc.
- For Signal
- Connection between Devices
- Sensor
- EMI Countermeasure
- Solder
- One-Touch Lock
- Silver-Plated
- MISUMI Original
● Boasts anti-noise performance by using a double-shielded cable!
● Shield is connected in the shell of the connector.
Wiring and Wire Color Page
>>Click here
Component Page
>>Click here
Part Number
Configured Part Number is shown.
HR10AP-PY-A-6-[0.2-50/0.1]
Specifications
| Specified Length (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| P (Male Plug) |  |   | 4 | 0.2 ~ 50 Can be specified by 0.1 m increments | |
| 6 | |||||
| 10 | |||||
| 12 | |||||
| S (Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| PP (Male Plug / Male Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| SS (Female Plug / Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| PS (Male Plug / Female Plug) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| PY (Male Plug / Y Terminal) With Pin No. Insertion Mark Tube |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| HR10AP Hirose Electric Co., Ltd | SY (Female Plug / Y Terminal) With Pin No. Insertion Mark Tube |  | 4 | ||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| PT (Male Plug / Loose Wires 100 mm) Pin No. Insertion Mark Tube |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| ST (Female Plug / Loose Wires 100 mm) With Pin No. Insertion Mark Tube |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| RP (Male Panel Mount) |  | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| RS (Female Panel Mount) | 4 | ||||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| Connector >>Click here | RPRT (Male Panel Mount / Loose Wires) With Pin No. Insertion Mark Tube |  | 4 | ||
| 6 | |||||
| 10 | |||||
| 12 | |||||
| RSRT (Female Panel Mount / Loose Wires) With Pin No. Insertion Mark Tube | 4 | ||||
| 6 | |||||
| 10 | |||||
| 12 |
| Connector Type | Shape Specification Type | Outline Image Drawing (Unit: mm) | Cable Type | Number of Cores | Specified Length (m) |
| Panel Mount Single Wire Cable Type | |||||
| HR10AP Hirose Electric Co., Ltd | RPT (Male Panel Mount) |  |  | 4 | 0.2 ~ 50 Can be specified by 0.1m increments |
| 6 | |||||
| 10 | |||||
| 12 | |||||
| Connector >>Click here | RST (Female Panel Mount) | 4 | |||
| 6 | |||||
| 10 | |||||
| 12 | |||||
More Information
Electrical Properties
| Number of Cores | Connector | A Cable | ||||
| Rated Current (A or less) | Rated Voltage (V or less) | Section Area | Rated Voltage | Allowable Current A (30°C) | ||
| AC | DC | |||||
| 4 | 2 | 100 | 140 | AWG28 (0.08mm2) | 30V | 2.3 |
| 6 | 100 | 140 | ||||
| 10 | 1.8 | |||||
| 12 | ||||||
| Part Number |
|---|
| HR10AP-PY-A-6-[0.2-50/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | CN1 | CN2 | Number Of Cores | Cable rated voltage (V) | Shield | Cable standard (UL/CSA) | Cable color | Twisted pair | Bend tolerant | Cable type | Specified Length (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) or more | Male straight | Y terminal | [6] 6 | 30 | 2 Layer | UL | Navy | Included | Flexible | A | 0.2 ～ 50 |
Loading...
Characteristics
| Item | Contents |
|---|---|
| Rated Current | 2 A or lower |
| Rated Voltage | 14-core: 150 VAC / 200 VDC, Other: 100 VAC / 140 VDC |
| Withstand Voltage | 300 VAC or less (500 VAC or less for 4-core) / 1 minute |
| Insulation Resistance | 1,000 MΩ or more / 100 VDC |
| Contact Resistance | 10 mΩ or less / 1 ADC |
| Compatible Wire Size | AWG26 or below Loose Wires or 0.15 mm2 or less Loose Wires |
* For applicable wire size, cable finished outer diameter should be within cable clamp inner diameter.
Material / Finish
| Item | Materials | Finish |
|---|---|---|
| Body Shell | Zinc Alloy | Satin Nickel Plated |
| Pin Contact | Brass | Silver Plating |
| Socket Contact | Phosphor Bronze | Silver Plating |
| Insulator | Polyamide Resin | Black |
Contact Arrangement Diagram
Connection Work Method (Relay type can be done by the same method.)
| Number of Cores | Wrench Spacing (mm) | D Dimension (mm) | Wrench Tightening Force |
|---|---|---|---|
| 4.6 | 7.5 | 10 | 1.5 N・m (15 kgf・cm) |
| 10.12 | 9.5 | 16 | 1.5 N・m (15 kgf・cm) |
Connector Insertion and Removal Method
Basic Information
| Connector type | HR10 | Connector manufacturer | Hirose Electric Group | Cable shape | Circular |
|---|---|---|---|---|---|
| Conductor dimensions(AWG) | 28 |
Specification/Dimensions
-
CN1
- Male straight
- Male panel mount
-
Number Of Cores
- 4
- 6
-
Cable rated voltage(V)
- 30
- 300
-
Shield
- 2 Layer
- N/A
-
Cable standard (UL/CSA)
- UL
- UL / CSA
-
Cable color
- Blue
- Navy
-
Twisted pair
- Included
- N/A
-
Bend tolerant
- Flexible
- N/A
-
Cable type
- A
- V
-
Specified Length(m)
-
CN2
- Y terminal
- Mark tube only
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- PRC04 Connector One-touch / Relay Model Cable
- JL04 Waterproof/Straight/Panel Mountable Connector Harness
- NET Straight/Panel Mountable Connector Harness
- PRC05 One-touch/Relay Connector Harness
- R04 Waterproof/Straight Connector Harness
- PTL Connector Straight/Relay Harness
- HR10A Connector Relay Harness
- JL05 Connector Straight / Panel Mountable Connector Harness
Customers Who Viewed This Item Also Viewed
-
HR10 Series Miniature Circular ConnectorHIROSE ELECTRIC
Standard Price : MYR 38.10-
Days to Ship : 1 Day(s) or more
-
-
-
-
Microminiature Circular Connectors, HR25/HR25A SeriesHIROSE ELECTRIC
Standard Price : MYR 99.91-
Days to Ship : 2 Day(s) or more
-
-
PRC05 Series One Touch Lock Type Small ConnectorTAJIMI ELECTRONICS
Standard Price : MYR 34.86
Days to Ship : 1 Day(s)
-
General Purpose EMI Countermeasures Cable/Slim-model Connector
MISUMI_Test
Days to Ship : 3 Day(s) or more
-
-
Round Water Resistant Connector (M12), XS2 HarnessOMRON
Standard Price : MYR 48.54-
Days to Ship : 1 Day(s)
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy