(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Wedge bushing pulley
Bushing system that can be attached and detach from shaft with one spanner. To install the optional MB bushing is required.
[Features]
· Can be easily attached to the shaft of the pulley with a single spanner.
· Easy to detach, reducing man-hours.
· When installing on the shaft, insert smoothly and tighten bolt securely using the taper, with no fine movement wear at the fitting part during use, extending the life of the shaft.
· Since the bushing has machined shaft hole and keyway corresponding to the standard shaft diameter, addition machining at the time of use is not required.
· Labor-saving of shaft hole machining, machining accuracy inspection, transportation for machining, etc. helping to reduce man-hours and shorten the lead times.
· Changing the position of the rotating body such as the pulley on the shaft is smooth, and centering can be done easily.
· The boss width can be designed small, relative to the shaft hole, for reduced pulley weight.
· Even with castings, the material can be made uniform by decreasing the thickness of the boss part.
· The Mitsuboshi belt wedge pulley is a standardized pulley, employing a bushing system.
· The bushing system can also be horizontally deployed to couplings, gears, sprocket wheels, etc.
Japanese Only
Part Number
Configured Part Number is shown.
300-5V-4-R1
- Download
Product Details - CAD Data unavailable
Basic Information
| Pulley diameter, nominal diameter(mm) | 300 | Number of Grooves | 4 | Type of bushings used | R1 |
|---|---|---|---|---|---|
| Corresponding belt type | 5V |
Please check the type/dimensions/specifications of the part 300-5V-4-R1 in the Wedge bushing pulley series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
Customers Who Viewed This Item Also Viewed
-
-
MB bushing new JIS regulated productMITSUBOSHI BELTING
Standard Price : MYR 398.67-
Days to Ship : 6 Day(s) or more
-
Ribstar G (rubber V ribbed belt)MITSUBOSHI BELTING
Standard Price : MYR 226.73-
Days to Ship : 3 Day(s) or more
-
-
Maxstar Wedge V-Belt, 3V TypeMITSUBOSHI BELTING
Standard Price : MYR 56.17-
Days to Ship : 1 Day(s)
-
Ribstar U (polyurethane V ribbed belt)MITSUBOSHI BELTING
Standard Price : MYR 74.27
Days to Ship : 7 Day(s) or more
-
-
-
Engineering plastic V Pulley Idlers (VIP)IMAO CORPORATION
Standard Price : MYR 72.51
Days to Ship : 1 Day(s)
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy