(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Standard Type, Throttle Valve, Elbow
Controls pneumatic equipment speed and air pressure signals.
Japanese Only
Part Number
Configured Part Number is shown.
Specifications Of Standard Type Throttle Valve - Elbow
Appearance of Standard Type Throttle Valve - Elbow
Dimensional drawing of Standard Type Throttle Valve - Elbow
Release Ring Mini Type
Release Ring Mini Type
| Format | Tube Outer Diameter øD | R | A | B | L1 | L2 | øp1 | øP2 | Tube End C | E | Hex H | X (øX) | Y | Mass (g) | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. | Min. | Max. | Min. | |||||||||||||
| JNC4-M5□ | 4 | M5 × 0.8 | 2.9 [3.2] | 29.7 | 27 | 26.8 [26.5] | 24.1 [23.8] | 6.7 [6.4] | 8 | 9.8 | 11 | 15.4 | 8 | 9.8 | 7.8 | 7.9 |
| JNC4-01□ | R1/8 | 8 | 41.5 | 35.1 | 37.5 | 31 | 10.7 | 14.4 | 17.7 | 10 | 18 | |||||
| JNC6-M5□ | 6 | M5 × 0.8 | 2.9 [3.2] | 29.7 | 27 | 26.8 [26.5] | 24.1 [23.8] | 7.5 [7.2] | 10.5 | 9.8 | 11.6 | 17.5 | 8 | 11.8 | 9.8 | 8.6 |
| JNC6-01□ | R1/8 | 8 | 41.5 | 35.1 | 37.5 | 31.1 | 10.7 | 14.4 | 18.3 | 10 | 19 | |||||
| JNC6-02□ | R1/4 | 11.1 | 49.2 | 42.1 | 43.1 | 36 | 11.9 | 18.4 | 20.2 | 14 | 37 | |||||
| JNC8-01□ | 8 | R1/8 | 8 | 41.5 | 35.1 | 37.5 | 31.1 | 11.9 | 14.4 | 14.4 | 18.1 | 26.9 | 10 | 13.8 | - | 22 |
| JNC8-02□ | R1/4 | 11.1 | 49.2 | 42.1 | 43.1 | 36 | 13.2 | 18.4 | 28.4 | 14 | 40 | |||||
| JNC8-03□ | R3/8 | 13.2 | 55.5 | 47.3 | 49.1 | 40.9 | 15.4 | 22 | 28.9 | 19 | 71 | |||||
| JNC10-02□ | 10 | R1/4 | 11.1 | 49.2 | 42.1 | 43.1 | 36 | 14.8 | 17.6 | 18.4 | 20.2 | 30.9 | 14 | 16.8 | - | 44 |
| JNC10-03□ | R3/8 | 13.2 | 55.5 | 47.3 | 49.1 | 40.9 | 16.7 | 22 | 31.2 | 19 | 74 | |||||
| JNC12-03□ | 12 | R3/8 | 13.2 | 55.5 | 47.3 | 49.1 | 40.9 | 18.4 | 21 | 22 | 23.4 | 36.9 | 19 | 19.8 | - | 78 |
| JNC12-04□ | R1/2 | 16 | 60.2 | 52.6 | 52 | 44.4 | 19.7 | 28 | 36.4 | 24 | 119 | |||||
| JNC1/4-M5□ | 1/4 | M5 × 0.8 | 2.9 [3.2] | 29.7 | 27 | 26.8 [26.5] | 24.1 [23.8] | 8.4 [8.1] | 12.4 | 9.8 | 17 | 24 | 8 | 11.8 | - | 11 |
| JNC1/4-01□ | R1/8 | 8 | 41.5 | 35.1 | 37.5 | 31.1 | 10.9 | 14.4 | 23.5 | 10 | 20 | |||||
| JNC1/4-02□ | R1/4 | 11.1 | 49.2 | 42.1 | 43.1 | 36 | 12.2 | 18.4 | 25.5 | 14 | 39 | |||||
| JNC5/16-01□ | 5/16 | R1/8 | 8 | 41.5 | 35.1 | 37.5 | 31.1 | 11.9 | 14.4 | 14.4 | 18.1 | 26.9 | 10 | 13.8 | - | 22 |
| JNC5/16-02□ | R1/4 | 11.1 | 49.2 | 42.1 | 43.1 | 36 | 13.2 | 18.4 | 28.4 | 14 | 40 | |||||
| JNC5/16-03□ | R3/8 | 13.2 | 55.5 | 47.3 | 49.1 | 40.9 | 15.4 | 22 | 28.9 | 19 | 71 | |||||
| JNC3/8-02□ | 3/8 | R1/4 | 11.1 | 49.2 | 42.1 | 43.1 | 36 | 14.8 | 17.6 | 18.4 | 20.2 | 30.9 | 14 | 16.8 | - | 44 |
| JNC3/8-03□ | R3/8 | 13.2 | 55.5 | 47.3 | 49.1 | 40.9 | 16.7 | 22 | 31.2 | 19 | 74 | |||||
Unit: mm
*1 If you do not want the black exterior color and the normal packaging, replace the □ at the end of the order format with the desired selection.
Exterior color: light gray = W, Packaging specification: clean room specification = -C,
Exterior color: light gray and packaging specification: clean room specification = W-C
*2 Taper thread type L1 and L2 dimensions are reference dimensions after tightening.
* 3 The value in square brackets ([]) is the clean room packaging specification value.
Speed adjustment methods
Illustration of 1. Driving equipment speed adjustment (1)
Illustration of 1. Driving equipment speed adjustment (2)
- 1.To increase the speed of the pneumatic equipment, begin turning the needle of the throttle valve counterclockwise from the fully open position. When it reaches the desired speed, tighten the lock nut so that the speed setting does not deviate.
- 2.If you turn the needle of the throttle valve too far (if the speed gets too fast), turn it clockwise to slow it down. When it reaches the desired speed, tighten the lock nut so that the speed setting does not deviate.
How To Attach And Detach The Connecting Part
1. How to attach and detach the tube (1)
1. How to attach and detach the tube (2)
2. How to tighten the screw (1)
1. How to attach and detach the tube
(1) Attaching the tube
The throttle valve (a needle throttle with a one-touch fitting) allows the tube to be secured with a lock claw by simply inserting the tube all the way to the end, while an elastic sleeve seals the outside of the tube.
(2) Detaching the tube
To detach the tube, push the release ring to open the lock claw and pull out the tube. Be sure to turn off the air before detaching the tube.
2. How to tighten the screw
(1) Tightening the screw
Tighten the screw by tightening the outer hexagon with a wrench.
| Part Number |
|---|
| JNC4-M5 |
| JNC6-01 |
| JNC6-02 |
| JNC6-M5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Nominal Diameter of Tube D | Nominal of Thread |
|---|---|---|---|---|---|---|
MYR 25.50 | 1 Piece(s) | 1 Day(s) | 4 | M5×0.8 | ||
MYR 41.24 | 1 Piece(s) | 1 Day(s) | 6 | R1/8 | ||
MYR 45.17 | 1 Piece(s) | 1 Day(s) | 6 | R1/4 | ||
MYR 33.37 | 1 Piece(s) | 1 Day(s) | 6 | M5×0.8 |
Loading...
Basic Information
| Type | Throttle Valves | Shape | Elbow | Control Direction | Meter Out / In |
|---|---|---|---|---|---|
| Joint Type | Screw, Tube Connection | Material | PBT | Environment, Applications | Standard |
| Thread Material | Brass | Knob Type | Standard | Lock Nut Type | Knurling |
| Operating Temp. Range(°C) | 0::60 | Operating Pressure Range(MPa) | 0::0.9 | Package Specifications | Standard |
| Seal Rubber Material | NBR | Release Ring Color | Black | Resin Body Color | Black |
| Applicable Fluids | Air |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Throttle Valves/90 Deg. Elbow
- Low-Flow Rate Type Speed Controller Low-Flow Rate Type Elbow
- Standard Type Speed Controller Universal
- Touch Connector FUJI Speed Controller α
- Touch Connector Five-in-Line Speed Controller
- Speed Controller With One-Touch Fittings, In-Line Type, Panel Mount Type, AS□□□1F-3 Series
- Uni-Thread Type Speed Controller With Indicator, AS-FS Series
- Speed Controller Adjustable By Straight-Slot Screwdriver, With One-Touch Fitting, Inline Type, AS□□□1F-D Series
Customers Who Viewed This Item Also Viewed
-
Standard Type Speed Controller ElbowPISCO
Standard Price : MYR 34.22-
Days to Ship : 1 Day(s) or more
-
-
Low-Flow Rate Type Speed Controller Low-Flow Rate Type ElbowPISCO
Standard Price : MYR 58.54
Days to Ship : 1 Day(s)
-
-
Corrosion Resistant Speed Controller, Corrosion Resistant SUS303-Equivalent ElbowPISCO
Standard Price : MYR 151.09
Days to Ship : 1 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy