(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Hex Socket Head Cap Bolt (Fine Threaded Screw) SNS for Use with Precision Equipment
M1 - M4. Ultra fine thread ideal for small size precision equipment.
[Features]
· M1 - M4.
· Ultra fine thread ideal for small size precision equipment.
Part Number
Configured Part Number is shown.
SNSS-M2X3-VA
Basic Information
| Nominal of Thread (M) | 2 | Length L (mm) | 3 | Detailed Shape | Standard |
|---|---|---|---|---|---|
| Mounting Hole Shape | Hex Socket | Basic Shape | Standard (Round) | Material | Stainless Steel |
| Surface Treatment | No | Thread Type | Metric coarse | Sales Unit | Low Quantity (can be purchased from one) |
| Application | Standard |
Please check the type/dimensions/specifications of the part SNSS-M2X3-VA in the Hex Socket Head Cap Bolt (Fine Threaded Screw) SNS for Use with Precision Equipment series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: THA Test FAQ area 01: How long is the life of a basic round wire coil spring?
- Answer: Answer : Unfortunately, there are no specific test values as reference regarding the life of a round wire coil spring because there is individual difference to a certain extent and the installation conditions are complicated.The usage count varies with the operating temperature, environment, and amount of deformation. To increase the usage count, it is recommended to use the spring up to 70% of the allowable displacement Fmax..
- Question: THA Test FAQ area 02:What are the JIS standards for general spring-related materials?
- Answer: Piano wires: JIS G 3522Iron wires: JIS G 3532Hard drawn steel wires: JIS G 3521Stainless steel wires for springs: JIS G 4313
- Question: THA Test FAQ area 03:What influence will the usage without a spring rail have on the spring?
- Answer: The usage without a spring rail will cause buckling of the spring, bending of its body and other problems, leading to breakage due to high stress locally generated on the inner side of the bending part. To ensure the service life of the spring, install the spring using the shaft, outer diameter guide rail, etc.※Basically, it is ideal to use the spring on the intermediate shaft of the inner diameter side guide rail, passing it through from the upper surface to the lower surface.
- Question: THA Test FAQ area 04:What influence will the usage count of more than 300,000 times beyond the maximum displacement (when used close to the solid length) have on the spring?
- Answer: The usage count of more than 300,000 times beyond the maximum displacement (when used close to the solid length) will cause high stress breakage above the calculated value on the section. In addition, near the solid length, the effective coil part will gradually get close and the spring constant will increase. Therefore, be sure to use within the allowable displacement Fmax.(mm).
- Question: THA Test FAQ area 05: ทดสอบคำถามภาษาไทยฝั่ง language = EN
- Answer: คำตอบภาษาไทย language = EN
Additional Products in this Category
- Precision Machine Screws/Pack
- No. 0, Type 1 Phillips Pan Head Screw
- No.0, Type 1 Phillips Small Low Flat Head Screws
- No. 0, Type 2 Phillips Pan Head Screw
- No.0, Type 3 Phillips Low Flat Head Screws
- No.0, Type 2 Small Phillips Pan Head Screw Pack for Precision Machinery
- No. 0, Type 3 Phillips Pan Head Screw Pack
- No. 0 Class 3 Phillips P-Type Pan Head Machine Screw Pack Product
Customers Who Viewed This Item Also Viewed
-
Precision Machine Screws/PackMISUMI_Test
Standard Price : MYR 44.92-
Days to Ship : 1 Day(s) or more
-
Low Small Head Hex Socket Head Cap ScrewNISSAN SCREW
Standard Price : MYR 7.75-
Days to Ship : 1 Day(s) or more
-
No. 0, Type 1 Phillips Pan Head ScrewSUNCO
Standard Price : MYR 1,123.81-
Days to Ship : 5 Day(s) or more
-
No. 0, Type 3 Phillips Pan Head Screw PackSUNCO
Standard Price : MYR 157.33
Days to Ship : 4 Day(s) or more
-
No.0, Type 2 Small Phillips Pan Head Screw Pack for Precision MachinerySUNCO
Standard Price : MYR 67.43
Days to Ship : 4 Day(s) or more
-
No.0, Type 1 Phillips Small Low Flat Head ScrewsSUNCO
Standard Price : MYR 530.43-
Days to Ship : 2 Day(s) or more
-
Stainless Steel Hex Socket Bolt 8 (Cap Screw) OkitsurasenSUNCO
Standard Price : MYR 0.84-
Days to Ship : 1 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy