(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
JIS V-Pulley, B Type
Full lineup of V-belt pulleys that conform to JIS B 1854.
[Features]
· Consistent production from casting to machining and surface treatment.
· Cell production method allows the production of many kinds of products in low volume, with short lead times.
· Shaft hole, keyway and push screw machining standardized.
· Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
· 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
· Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
[Applications]
· Fans, etc.
Japanese Only
Part Number
Configured Part Number is shown.
JIS V-pulley Specification
Consistent production from casting to machining and surface treatment. Additionally, NC machinery, automatic machinery, balancers, etc. have been developed specifically for pulley machining. Cell production allows the production of many kinds of products in low volume, with short lead times. Delivering convenience to customers.
Convenient additional machining service has been standardized.
Shaft hole, keyway, and set screw machining are available in standardized form.
Extensive product range. 650 size.
A: 146 size, B: 218 size, C: 212 size, D: 74 size. The 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used frequently in drive side mechanisms.
High quality exceeding JIS standards.
Top quality pulley with materials, machining and balance accuracy exceeding JIS standards (JIS B1854 - 1987 "General Use V Pulleys." Imbalance tolerance on the outer circumference is 0.1% of the pulley mass.
Surface treatment, for improving corrosion resistance is a coating with a beautiful finish.
V-pulley external appearance
Product standard Product standard conforms to JIS B1854-1987 "General Purpose V Pulleys."
| Groove Shape | Nominal Size dm | α ± 0.5 (°) | lo | w1 | k | ko | e*1 | f | ||
|---|---|---|---|---|---|---|---|---|---|---|
| A | 100 Or Less | 34 | 9.2 | 11.95 | 4.5 | +0.2 0 | 8.0 | 15.0 ±0.4 | 10.0 | ±1 |
| Over 100, And 125 Or Less | 36 | 12.12 | ||||||||
| Over 125 | 38 | 12.30 | ||||||||
| B | 160 Or Less | 34 | 12.5 | 15.86 | 5.5 | ＋0.2 0 | 9.5 | 19.0 ± 0.4 | 12.5 | ±1 |
| Over 160, And 200 Or Less | 36 | 16.07 | ||||||||
| Over 200 | 38 | 16.29 | ||||||||
| C | 250 Or Less | 34 | 16.9 | 21.18 | 7.0 | +0.3 0 | 12.0 | 25.5 ± 0.5 | 17.0 | ±1 |
| Over 250, And 315 Or Less | 36 | 21.45 | ||||||||
| Over 315 | 38 | 21.72 | ||||||||
| D | 450 Or Less | 36 | 24.6 | 30.77 | 9.5 | +0.4 0 | 15.5 | 37.0 ±0.5 | 24.0 | +2 -1 |
| Over 450 | 38 | 31.14 | ||||||||
Groove dimensions (units: mm)
*1: e cumulative error of 0.8 mm or less.
| Nominal Size dm | Outer Circumference Vibration Tolerance | Rim Side Vibration Tolerance | Diameter Tolerance |
|---|---|---|---|
| 118 Or Less | 0.15 (0.3) | 0.15(0.3) | ±0.4 (±0.6) |
| Between 125 And 160 | 0.15 (0.4) | 0.15(0.4) | ±0.6(±0.8) |
| Between 165 And 224 | 0.2 (0.4) | 0.2(0.4) | ±0.6(±0.8) |
| Between 236 And 300 | 0.25 (0.4) | 0.25(0.4) | ±0.6(±0.8) |
| Between 315 and 450 | 03 (0.6) | 0.3 (0.6) | ±0.9(±1.2) |
| Between 475 and 630 | 0.4(0.6) | 0.4(0.6) | ±0.9(±1.2) |
| Between 710 and 1,120 | 0.5 (0.8) | 0.5 (0.8) | ±1.2(±1.6) |
Outer circumference / rim side vibration tolerance value and outer diameter tolerance value (units: mm)
*Parentheses enclose corresponding JIS B1854-1987 values
Balance
Imbalance mass allowance on the outer circumference is 0.1% or 1 g of the pulley mass, whichever is larger. At a circumferential speed of 15 m/s, this corresponds to G16 of the JIS B 0905 "Rotating Machines - Balance Quality of Rigid Rotors."
Material and finish
JIS V-pulley: FC200 or higher coating, NBK blue (main body)
| Part Number |
|---|
| 112-B-1-[11-32/1]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H] |
| 112-B-1-[11-32/1]-[BCN,BKN,BKS,BKT,BKW,BNN,BNS,BNT,BNW]-[F6,F8,F,G6,G8,G,H6,H8,H][N,NS1,NS2,NS3,NSF,Q,QS1,QS2,QS3,QSF] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
- | 1 Piece(s) | 5 Day(s) or more | ||
- | 1 Piece(s) | 5 Day(s) or more |
Loading...
Basic Information
| Nominal Diameter(mm) | 112 | Groove shape | B | Number of grooves(piece) | 1 |
|---|---|---|---|---|---|
| Type | 21U | Additional Work | Available |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Engineering plastic V Pulley Idlers (VIP)
- Isomek SP Pulley
- Wedge Pulley
- NS standard V pulley A
- SNS JIS V Pulley A
- SNS JIS V pulley B
- JIS V-Pulley, C Type
- JIS V-Pulley, D Type
Customers Who Viewed This Item Also Viewed
-
-
-
-
Standard V-Belt, B TypeMITSUBOSHI BELTING
Standard Price : MYR 53.05-
Days to Ship : 1 Day(s) or more
-
-
-
-
Standard V-Belt, A TypeMITSUBOSHI BELTING
Standard Price : MYR 37.61-
Days to Ship : 1 Day(s) or more
-
-
Red Label V-Belt, B TypeMITSUBOSHI BELTING
Standard Price : MYR 181.27
Days to Ship : 6 Day(s) or more
-
Engineering plastic V Pulley Idlers (VIP)IMAO CORPORATION
Standard Price : MYR 72.51
Days to Ship : 1 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy