Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Air Combination, Filter Regulator + Mist Separator, AC20D-A To AC40D-A

SMC modular-type F.R.L. combination unit.
[Features]
· Uses a transparent bowl guard.
· A transparent bowl guard with improved environmental resistance that provides all-round protection.
· The manufacturer has removed the window from the bowl guard and instead covered the entire internal bowl with a polycarbonate transparent bowl guard.
· Now, even if the environment changes and the bowl is exposed to corrosive chemicals or oil, the foreign matter will not stick directly to the pressurized bowl. This can help reduce the risk of the bowl breaking.
· Superior visibility: 360°
· The use of the transparent bowl guard allows you to check the status of the drain inside the filter bowl and to check the amount of residual oil in the lubricator from any angle.
· Weight reduction: reduced by up to 90 g
· Without corrosion. The use of a resin body ensures there is no rusting.

(i)Caution

Refer to the catalog for details on product specifications.
The products shown in the image are representative. CAD data is not supported for some model numbers.

Part Number

Configured Part Number is shown.

: 30; 45; 60

1
2
3
4
Next >>

Part Number
AC20D-01C-2-A
AC20D-01C-A
AC20D-01C-V1-A
AC20D-01C-V-A
AC20D-01C-V-C-A
AC20D-01CG-2-A
AC20D-01CG-A
AC20D-01CG-CR-A
AC20D-01CG-S-A
AC20D-01CG-V-A
AC20D-01CG-V-R-A
AC20D-01CM-A
AC20D-01CM-V1-C-A
AC20D-01CM-V-C-A
AC20D-02C-2-A
AC20D-02C-A
AC20D-02C-C-A
AC20D-02C-R-A
AC20D-02C-S-A
AC20D-02C-V1-A
AC20D-02C-V-A
AC20D-02CG-1-A
AC20D-02CG-2-A
AC20D-02CG-A
AC20D-02CG-C-A
AC20D-02CG-R-A
AC20D-02CG-S-A
AC20D-02CG-SV1-A
AC20D-02CG-SV-2-A
AC20D-02CG-SV-A
AC20D-02CG-V1-A
AC20D-02CG-V-2-A
AC20D-02CG-V-A
AC20D-02CG-V-R-A
AC20D-02CM-A
AC20D-02CM-C-A
AC20D-02CM-R-A
AC20D-02CM-SV1-A
AC20D-02CM-V1-A
AC20D-02CM-V1-R-A
AC20D-02CM-V-A
AC20D-F02C-A
AC20D-F02CG-A
AC20D-F02CM-A
AC20D-N02CG-Z-A
AC30D-02C-2-A
AC30D-02C-A
AC30D-02C-R-A
AC30D-02CG-2-A
AC30D-02CG-A
AC30D-02CG-R-A
AC30D-02CG-S-A
AC30D-02CG-SV-A
AC30D-02CG-V-A
AC30D-02CM-A
AC30D-02D-A
AC30D-02D-S-A
AC30D-02D-SV-A
AC30D-02DG-2-A
AC30D-02DG-A

Standard Unit Price	Minimum order quantity	Days to Ship	Connection Dia.	Case Material	Case Guard	Exhaust Structure	Flow Direction	Drain Cock	Pressure Gauge	Size of Body	Pressure Switch	Residual Pressure Relief 3-Port Connection Valve	Set Pressure	Drain Outlet	Pressure Unit
MYR 838.73	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Resin	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 788.83	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,073.13	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,073.13	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,133.17	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 925.68	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Resin	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 875.80	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 935.42	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,205.10	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,160.08	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,160.08	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 882.42	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,227.20	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,227.20	1 Piece(s)	21 Day(s)	Rc1/8	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 838.73	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 788.83	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 848.45	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 788.83	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,118.15	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,073.13	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,073.13	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 875.80	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.02 to 0.2 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 925.68	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 875.80	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 935.42	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 875.80	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,205.10	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,489.40	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	Yes	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,539.73	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	Yes	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,489.40	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	Yes	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,160.08	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,209.97	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,160.08	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,160.08	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 882.42	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 942.47	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 882.42	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,496.47	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	Yes	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,167.15	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,167.15	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	Mounting position: V + AW + AFM	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,167.15	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 788.83	1 Piece(s)	21 Day(s)	G1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 875.80	1 Piece(s)	21 Day(s)	G1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 882.42	1 Piece(s)	21 Day(s)	G1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	20	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 875.80	1 Piece(s)	21 Day(s)	NPT1/4	[Plastic] Polycarbonate Case	No	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	20	None	None	0.05 to 0.7 MPa	With drain cock	Name plate, bowl caution plate and pressure gauge units: psi, °F
MYR 1,267.35	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,197.60	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,197.60	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	No (No Pressure Port Plug)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,354.32	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,284.57	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,284.57	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Reverse Flow (Right to Left)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,613.88	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,903.47	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	Yes	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,574.17	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	None	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,291.65	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.C. (Normally Closed) at non-pressurized without drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with color zone)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,147.73	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.O. (Normally Open) at non-pressurized with drain emissions	No (No Pressure Port Plug)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,477.03	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.O. (Normally Open) at non-pressurized with drain emissions	No (No Pressure Port Plug)	30	Yes	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,766.62	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.O. (Normally Open) at non-pressurized with drain emissions	No (No Pressure Port Plug)	30	Yes	Mounting position: AW + AFM + V	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,304.43	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Resin	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.O. (Normally Open) at non-pressurized with drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa
MYR 1,234.68	1 Piece(s)	21 Day(s)	Rc1/4	[Plastic] Polycarbonate Case	Presence	Relief type	[Standard Flow (Left to Right)] Flow Direction	[Auto/Manual] N.O. (Normally Open) at non-pressurized with drain emissions	[With Standard Pressure Gauge] Round-shaped pressure gauge (with limit indicator)	30	None	None	0.05 to 0.7 MPa	With drain cock	Unit used on nameplate and pressure gauge: MPa

1
2
3
4
Next >>

Basic Information

Regulator Unit Combination	Filter Regulator + Mist Separator	Filter, Filtration Level	5μm	Mist Separator	0.3μm
Compressed Air Quality	General Dry Air	Max. Operating Pressure(MPa)	1

Configure

211 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Connection Dia.
- Rc1/8
- Rc1/4
- Rc3/8
- Rc1/2
- Rc3/4
- NPT1/4
- NPT3/8
- G1/4
- G3/8
- NPT1/2
- NPT3/4
- G1/2
- G3/4
Clear
Case Material
- Plastic
  - Engineering Plastic
  - Nylon Case
  - Polycarbonate Case
  - Resin
Clear
Case Guard
- No
- Presence
Clear
Exhaust Structure
- Non-relief type
- Relief type
Clear
Flow Direction
- Standard Flow (Left to Right)
  - Flow Direction
- Reverse Flow (Right to Left)
  - Flow Direction
Clear
Pressure Gauge
- No (No Pressure Port Plug)
- With Standard Pressure Gauge
  - Round-shaped pressure gauge (with color zone)
  - Round-shaped pressure gauge (with limit indicator)
Clear
Size of Body
20

30

40
Clear
Pressure Switch
- None
- Yes
Clear
Residual Pressure Relief 3-Port Connection Valve
- Mounting position: AW + AFM + V
- Mounting position: V + AW + AFM
- None
Clear
Set Pressure
- 0.02 to 0.2 MPa
- 0.05 to 0.7 MPa
Clear
Drain Outlet
- Drain guide 1/4
- Drain guide 1/8
- With drain cock, barb fitting (for ø6 × ø4 nylon tube)
- With drain cock
Clear
Pressure Unit
- Name plate, bowl caution plate and pressure gauge units: psi, °F
- Unit used on nameplate and pressure gauge: MPa
Clear
type
- AC20D
- AC30D
- AC40D
Clear
Drain Cock
- Manual
  - Manual
- Auto/Manual
  - N.C. (Normally Closed) at non-pressurized without drain emissions
  - N.O. (Normally Open) at non-pressurized with drain emissions
- Not Provided
  - No (Drain Guide)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

1 Day(s) or Less

17 Day(s) or Less

18 Day(s) or Less

19 Day(s) or Less

21 Day(s) or Less

23 Day(s) or Less

33 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

Air Combination, Filter Regulator + Mist Separator, AC20D-A To AC40D-A

(i)Caution

Basic Information

Configure

Specification/Dimensions

Connection Dia.

Case Material

Case Guard

Exhaust Structure

Flow Direction

Pressure Gauge

Size of Body

Pressure Switch

Residual Pressure Relief 3-Port Connection Valve

Set Pressure

Drain Outlet

Pressure Unit

type

Drain Cock

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm