(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
DF1B Series 2.5-mm-Pitch Connector for Discrete Wire Connection (UL/CSA Standard Certified Product)【1-100 Pieces Per Package】 (DF1BZ-8DP-2.5DS)
- Volume Discount
Connector for board-to-cable and cable-to-cable connections with 2.5-mm pitch. A wide variety of offerings, including choices in PCB mounting orientation, terminal arrangements, and terminal plating.
[Features]
· A new approach to contact pressure welding and crimping: A new type of connector where the contact-pressure-welded terminal is inserted into the casing.
· By combined use of insulation displacement terminals and crimp terminals, wires with different current ratings can coexist within the same case.
· Terminals can be replaced after wires are connected, allowing ease of maintenance.
· Since the insulation displacement area is protected by the housing, a high level of reliability is ensured.
· Insulation displacement can be performed simply by replacing the applicator of a conventional crimp machine, so no expensive insulation displacement machine is required.
· Headers support potting: A header with increased height to support potting of the board for waterproofing (via resin filling) is available.
· A wide variety of offerings: Each of the "board-to-board" and "relay" series offers both single-row and double-row terminal arrangements, as well as tin and gold standard plating.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.
Japanese Only
Part Number
Configured Part Number is shown.
DF1BZ-8DP-2.5DS
2.5‑mm Pitch Cable-to-Board and Cable-to-Cable Connector
Wide variation of circuit board mounting directions, contact configurations and contact platings are available
Main Features of DF1B Series 2.5‑mm Pitch Board-to-Cable Connectors
Circuit board mounting height (crimp type)
Low-profile with 10‑mm and 2.5‑mm pitches.
Insulation displacement area protected by protector(ID type)
The insulation displacement area is protected by a protector, giving it excellent tensile strength and helping keep it clear of dust.
Easy assembly using simple tools(ID type)
No expensive ID machines required. Simply inserting the cable into the protector and tighten with an ID tool to assemble.
Supports in-line connections(pressure-welding type)
Supports in-line connections, making it possible to extract signals from the middle of the cable.
Supports signal extraction via in-line connections.
Wire / DF1 ID connector / circuit board
Product Specifications
| Product Information | |
|---|---|
| Product Name | DF1-PD2428SCB |
| HRS No. | CL0541-0661-9-00 |
| Basic Performance | |
| Connector Type | Contacts |
| Rated Current | 3 A |
| Rated Voltage (AC) | 250 V AC |
| Number of Matings and Un-Matings | 30 |
| Contact Plating | Gold |
| Wiring Method | Crimp |
| Compatible Wire Type | Discrete wire |
| Compatible Wire Size (AWG) | AWG 28 to 24 |
| Operating Temperature Range | -30 to 85°C |
| Mechanical Performance | |
| Plating Thickness | 0.2 µm |
| Electrical Specifications | |
| Withstand Voltage | 650 V max. |
| Product Size | |
| UL-Type of Wire/Cable | UL 1061, 1007 |
| Compatible Wire Coating Outer Diameter | 0.900 to 1.500 mm |
| Packaging Specifications | |
| Sales Unit | Pack |
| Product Weight | 0.058 g |
| Connector Type | Terminals, sockets, headers, short pins, accessories |
|---|---|
| Harness | Yes |
| Number of Contacts | 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 20 |
| No. of Rows (Mating Part) | 1 |
| Mounting Pitch | 2.5 mm |
| Opening Pitch | 2.5 mm |
| Rated Current | 3 A |
| Rated Voltage (AC) | 250 V AC |
| Number of Matings and Un-Matings | Tin plating: 30, Gold plating: 50 |
| Board Mounting Method | Through-hole DIP |
| Opening Direction | Straight, right-angle |
| Board Mounting Style | Standard on-board |
| Contact Plating | Gold, tin |
| Wiring Method | Crimped, insulation displacement |
| Compatible Wire Type | Discrete wire |
| Compatible Wire Size (AWG) Min. | AWG 28, 24, 26 |
| Compatible Wire Size (AWG) Max. | AWG 26, 24 |
| Operating Temperature Range (Max.) | 85, 80°C |
| Operating Temperature Range (Min.) | -30, -35°C |
Product Standards
| Rating | Rated current (Note 1) | Wire size | AWG 24: 3 A | Operating Temperature Range | -30 to 85°C (Note 2) |
|---|---|---|---|---|---|
| AWG 26: 2 A | Operating humidity range | 40 to 80% | |||
| AWG 28: 1 A | Storage temperature range | -10 to 60°C (Note 3) | |||
| Rated voltage | 250 V AC | Storage temperature range | 40 to 70% (Note 3) | ||
Ratings of DF1B Series 2.5‑mm Pitch Board-To-Cable Connectors
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC | |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 650 V AC for 1 min. | |
| 3. Contact resistance | 30 mΩ or less | Measure at 100 mA | |
| 4. Single unit insertion/extraction force | Min.: 0.44 N (45 gf), Max. 4.4 N (450 gf) | Measure using a steel pin of □0.635 ±0.002 mm | |
| 5. Vibration resistance | There shall be no discontinuity for 1 μs or greater. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours | |
| 6. Humidity resistance | Contact resistance: 30 mΩ or less, Insulation resistance: 1,000 MΩ or more | Leave at temperature 40 ±2°C and humidity 90 to 95% for 96 hours | |
| 7. Temperature cycle | Contact resistance: 30 mΩ or less, Insulation resistance: 1,000 MΩ or more | (-55°C: 30 mins > 5 to 35°C: 10 mins > 85°C: 30 mins > 5 to 35°C: 10 mins) 5 cycles | |
| 8. Durability (mating / un-mating) | Contact resistance: 30 mΩ or less | Tin-plated: 30 times | Gold-plated: 50 times |
| 9. Solder heat resistance | No melting of resin parts affecting performance. | Flow: 250°C for 10 seconds | Manual solder: Soldering iron temperature of 300°C for 3 seconds |
Standards and Conditions of DF1B Series 2.5‑mm Pitch Board-To-Cable Connectors
(Note 1) The rated current may vary depending on the wire size used. Only the rating of the header is 3 A.
(Note 2) This includes temperature increases caused by the flow of current.
(Note 3) The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
Product Materials
| Product | Part Name | Materials | Finish | UL Standard |
|---|---|---|---|---|
| Socket | Insulator | Polyamide resin | White (natural) | UL94V-0 |
| ID contact for sockets | Contacts | Phosphor bronze | Tin plating or gold plating | - |
| Crimp contacts for sockets | Contacts | Phosphor bronze | Tin plating or gold plating | - |
| Pin header | Insulator | Polyamide resin | White (natural) | UL94V-0 |
| Contacts | Brass | Tin plating or gold plating | - | |
| In-line plug | Insulator | Polyamide resin | White (natural) | UL94V-0 |
| ID contact for inline plugs | Contacts | Phosphor bronze | Tin plating or gold plating | - |
| Crimped contact for in-line plugs | Contacts | Phosphor bronze | Tin plating or gold plating | - |
Materials of DF1B Series 2.5‑mm Pitch Board-To-Cable Connectors
| Part Number |
|---|
| DF1BZ-8DP-2.5DS |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Applicable pin/contact | Number Of Pins | Connector Type | Rated Current (A) | Wiring Method | Connection direction | Plating of part touching terminal | Product Category | Specifications | Features | Conforming wire size (AWG) | Contact Pitch (mm) | Terminal pitch (mm) | Special Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 9.26 | 1 Piece(s) | 2 Day(s) or more | - | Male | 8 | For PCB | 3 | [Other] Circuit Board Mounting (DIP) | Angle | Tin | Pin Header | Double row | NA | NA | 2.5 | 2.5 | - |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D· E· F | D· E· F | DF |
|---|---|---|---|---|---|
| Allowable Voltage(V) | AC250 | Representative Standard | UL / CSA | Operating Temperature Range(°C) | -35 to +85 |
| Rated voltage (standard)(V) | UL CSA: 30V |
Specification/Dimensions
-
Applicable pin/contact
- Male
- Female
-
Number Of Pins
-
Connector Type
- Cable Connection
- For PCB
- Panel Mount
- Cable Connection
-
Rated Current(A)
-
Wiring Method
- Crimp
- Other
-
Connection direction
- Straight
- Angle
-
Plating of part touching terminal
- Gold
- No terminal
- Tin
-
Product Category
-
Specifications
- Double row
- NA
- Single row
-
Features
- NA
- Simple Lock
-
Conforming wire size(AWG)
- 30
- NA
-
Contact Pitch(mm)
Days to Ship
-
- All
- 2 Day(s) or Less
- 3 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- EMI Countermeasure Solder/Press Contact D-sub Connector
- Solder/Machine Contact (Low Cost) D-Sub Connector
- MIL Press-fit Female Connector (Without Lock)
- Small, Rectangular Interface Connector, 3200 Series
- Han Series Hood/Housing
- EPIC® H-A 16 TG
- EPIC® H-B 24 SGRH
- EPIC® H-D 40 machined
Customers Who Viewed This Item Also Viewed
-
HIF3B Series MIL Standard-Compliant Ribbon Cable ConnectorHIROSE ELECTRIC
Standard Price : MYR 5.46-
Days to Ship : 1 Day(s) or more
-
Terminal Crimping/Pressing Tool for DF1B SeriesHIROSE ELECTRIC
Standard Price : MYR 6,605.35
Days to Ship : 3 Day(s) or more
-
DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)HIROSE ELECTRIC
Standard Price : MYR 2.25-
Days to Ship : 2 Day(s) or more
-
2‑mm Pitch Board-to-Cable Connectors (Single-Row Contacts Type), DF3 SeriesHIROSE ELECTRIC
Standard Price : MYR 14.04-
Days to Ship : 3 Day(s) or more
-
2.5‑mm Pitch Full-Lock Type For Discrete Wire Connections (Compliant With UL/CSA Standards)HIROSE ELECTRIC
Standard Price : MYR 293.58
Days to Ship : 3 Day(s) or more
-
-
Flat Cable Connector (General Purpose Type) - XG4
OMRON
Standard Price : MYR 2.61-
Days to Ship : 1 Day(s) or more
-
1.25‑mm Pitch Board-To-Cable Connectors, DF13 SeriesHIROSE ELECTRIC
Standard Price : MYR 51.68
Days to Ship : 3 Day(s) or more
-
D-Sub, D02, D02-M15 SeriesJAPANAVIATION
Standard Price : MYR 31.58-
Days to Ship : 1 Day(s) or more
-
SUMICON 1600 Series Multi-Contact Rectangular ConnectorHIROSE ELECTRIC
Standard Price : MYR 11.24-
Days to Ship : 3 Day(s) or more
-
-
Mini Universal Mate-N-Lok ConnectorTE Connectivity
Standard Price : MYR 1.92-
Days to Ship : 1 Day(s)
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy