(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
2‑mm Pitch Direct-To-Board Connector, DF4 Series (Part Numbers)
Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
[Features]
・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
・Small type/multi-pin: a wide range of small types with a number of pins.
・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.
Japanese Only
Part Number
Configured Part Number is shown.
DF4-16DP-2C
2‑mm Pitch Direct-To-Board Connector
DF4 Series list
Board pre-fixed mechanism
Specifications of DF4 Series 2‑mm Pitch Board-to-Cable Connector
Product Standards
| Rating | Rated current (Note 1) | Crimp | Wire size | AWG 24: 3 A | Operating Temperature Range | -30 to 85°C (Note 2) |
|---|---|---|---|---|---|---|
| AWG 26: 2 A | Operating humidity range | 40 to 80% | ||||
| AWG 28: 1 A | Storage temperature range | -10 to 60°C (Note 3) | ||||
| Rated voltage | Crimp | 250 V AC | Storage humidity range | 40 to 70% (Note 3) | ||
| Item | Standard | Conditions | |
|---|---|---|---|
| 1. Insulation resistance | 1,000 MΩ or more | Measure at 500 V DC | |
| 2. Withstand voltage | There shall be no flashover or dielectric breakdown. | Energize at 650 V AC for 1 min. | |
| 3. Crimping area resistance | 30 mΩ or less | Measure at 100 mA | |
| 4. Vibration resistance | No damage, cracks, or parts looseness. | Frequency: 10 to 55 Hz, Single amplitude: 0.75 mm, Three directions, 2 hours | |
| 5. Humidity resistance | Crimping area resistance: 30 mΩ or less, Insulation resistance: 500 MΩ or more | Leave at temperature 40°C ±2°C and humidity 90 to 95% for 96 hours | |
| 6. Temperature cycle | Crimping area resistance: 30 mΩ or less, Insulation resistance: 1,000 MΩ or more | (-55°C: 30 mins > 5 to 35°C: 10 mins > 85°C: 30 mins > 5 to 35°C: 10 mins) 5 cycles | |
| 7. Solder heat resistance | No melting of resin parts affecting performance. | Flow: 250°C for 10 seconds | Manual solder: Soldering iron temperature of 300°C for 3 seconds |
Note 1. The rated current may vary depending on the wire size used.
Note 2. This includes temperature increases caused by the flow of current.
Note 3. The term "storage" refers to products stored for long periods of time prior to mounting and use. The operating temperature and humidity range are applicable in a non-energized state after board mounting.
Note 4. Information contained in this catalog represents general requirements for this product series.
Materials
| Product | Part Name | Materials | Finish | UL Standard |
|---|---|---|---|---|
| Crimping plug | Insulator | Polyamide resin | Black | UL94V-0 |
| Crimping contact for plug | Contacts | Brass | Tin plating | ― |
Product Outline Drawing And Dimensions
Single-row crimping plug
- *Compatible through hole diameter: ø0.8 mm +0, +0.1
Single-row crimping plug dimensional drawing
Crimping contact dimensional drawing
| Conductor Size (Stranded Wire Configuration) | Recommended Cable | Jacket Outer Diameter |
|---|---|---|
| AWG24 (11 cores / 0.16 mm) | UL1061 | ø0.75 to ø1.2 mm |
| AWG26 (7 cores / 0.16 mm) | ||
| AWG28 (7 cores / 0.127 mm) | UL1061/1007 |
Compatible cable (tin-plated annealed copper wire)
- *Strip length: 1.3 to 1.9 mm
| Type | Product No. | HRS No. | Compatible Contact |
|---|---|---|---|
| Applicator | AP105-DF4-2428P | CL901-4539-0 | DF4-2428PCF(05) |
| Press main body | CM-105 | CL901-0005-4 | ― |
| Manual crimping tools | DF4-TA2428HC | CL550-0173-6 | DF4-2428PC(05) |
| Extraction tool | DF-C-PO(B) | CL550-0179-2 | DF4-2428PCF(05) |
Applicable crimping tool for crimping contacts
Double-row crimping plug
- *Compatible through hole diameter: ø0.9 mm ±0.05
Double-row crimping plug dimensional drawing
- *The DIP side may vary depending on the cable thickness and on whether the crimping terminal is bent up or down.
Product Usage Precautions
Soldering precautions
- Flow conditions for automatic soldering devices - Solder temperature: 250°C ±5°C, Soldering time: within 3 seconds
- Manual soldering conditions - Soldering iron temperature: 290°C ±10°C, Soldering time: within 2 seconds
- If the cable neighboring the connector area is bent, the cable jacket may break due to solder heat, causing the cable core to be exposed. To prevent this, ensure a large bending radius (refer to diagram)
- After soldering, applying a load to the cable while the cable or connector is still holding heat may cause the jacket holding area to become loose. As such, be sure to return the connector to room temperature after soldering
Do not use solvents such as trichloroethane that may cause cable coating damage. Also avoid heated cleaning when using solvents.
| Part Number |
|---|
| DF4-16DP-2C |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship |
|---|---|---|---|---|
MYR 7.63 | 1 Piece(s) | 5 Day(s) or more |
Loading...
Basic Information
| Connector Shape | Rectangular | Connector series initials | D· E· F | D· E· F | DF |
|---|---|---|---|---|---|
| Applicable pin/contact | Male | Number Of Pins | 16 | Connector Type | For PCB |
| Rated Current(A) | 3 | Allowable Voltage(V) | AC250 | Connection direction | Straight |
| Plating of part touching terminal | No terminal | Product Category | Double low plug | Specifications | Circuit Board Direct Attachment |
| Features | NA | Contact Pitch(mm) | 2 | Operating Temperature Range(°C) | -30 to +85 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Small Han Waterproof Connector
- EMI Countermeasure Solder/Press Contact D-sub Connector
- Solder/Machine Contact (Low Cost) D-Sub Connector
- EMI Countermeasure D-Sub Connector with Metal Hood
- MIL Press-fit Male Extension Connector
- 1.27‑mm Pitch Two-Piece Connectors, HIF6 Series
- 1‑mm Pitch Board-To-Cable Connector For LVDS Signals, FX15 Series
- EPIC® H-BE 10 Screw termination
Customers Who Viewed This Item Also Viewed
-
2‑mm Pitch Board-to-Cable Connectors (Single-Row Contacts Type), DF3 SeriesHIROSE ELECTRIC
Standard Price : MYR 14.04-
Days to Ship : 3 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy