(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Solid State/Timer H3Y
[Features]
· Ultra-small timer for use in sequence control incorporating a dedicated IC.
· High precision with a repeat error of ±1% (including first time value).
· Recover time including recovery during operation is less than 100ms.
· Easy time setting using the large dial in common with the +- driver.
· Semi-multi power source voltages.
· A standard product which acquired UL, CSA standards.
· EN61812-1 Compatible, corresponds to the CE mark.
Japanese Only
Part Number
Configured Part Number is shown.
Product Features
H3Y external appearance
| Maximum Scale Time | Set Time Range |
|---|---|
| 0.5 s | 0.04 s to 0.5 s |
| 1 s | 0.1 s to 1.0 s |
| 5 s | 0.2 s to 5.0 s |
| 10 s | 0.5 s to 10 s |
| 30 s | 1.0 s to 30 s |
| 60 s | 2.0 s to 60 s |
| 120 s | 5.0 s to 120 s |
| 3 min | 0.1 min to 3 min |
| 5 min | 0.2 min to 5 min |
| 10 min | 0.5 min to 10 min |
| 30 min | 1.0 min to 30 min |
| 60 min | 2.0 min to 60 min |
| 3 h | 0.1 h to 3 h |
Rating
| Format | Series H3Y-2 (-0) | Series H3Y-4 (-0) | |
|---|---|---|---|
| Power Supply Voltage*6 | · 100 to 120 V AC (50/60 Hz) · 200 to 230 V AC (50/60 Hz) · 24 V AC (50/60 Hz)*1 · 12 V DC, 24 V DC, 48 V DC, 100 to 110 V DC, 125 V DC*2, *3 | ||
| Allowable Voltage Variation Range | 85 to 110% of power supply voltage (however, 90 to 110% of power supply voltage for 12 V DC specifications only)*4 | ||
| Power Consumption | 100 to 120 V AC | 1.5 VA (At 120 V AC) | |
| 200 to 230 V AC | 1.8 VA (At 230 V AC) | ||
| 24 V AC | 1.5 VA (At 24 V AC) | ||
| 12 V DC | 0.9 W (At 12 V DC) | ||
| 24 V DC | 0.9 W (At 24 V DC) | ||
| 48 V DC | 1.0 W (At 48 V DC) | ||
| 100 to 110 V DC | 1.3 W (At 110 V DC) | ||
| 125 V DC | 1.3 W (At 125 V DC) | ||
| Recovery Voltage | 10% or more of power supply voltage*5 | ||
| Control Output | 250 V AC, 5 A, resistive load (cosφ = 1) Minimum applied load 5 V DC, 1 mA (P level, reference value) Contact material: Ag | 250 V AC, 3 A, resistive load (cosφ = 1) Minimum applied load 1 V DC, 1 mA (P level, reference value) Contact material: Au clad + Ag alloy | |
| Ambient Operating Temperature | -10 to +50°C (No Freezing) | ||
| Storage Temperature | -25 to +65°C (No Freezing) | ||
| Ambient Operating Humidity | 35 to 85% | ||
*1. Do not use the inverter output as a power supply.
*2. Usable up to single-phase full-wave rectification power supply.
*3. 12 V DC is for the H3Y-2 and H3Y-2-0 series only.
*4. When continuously using at an ambient operating temperature of 50°C, use at 90 to 110% of the power supply voltage (95 to 110% for 12 V DC).
*5. For reliable recovery, set to 10 V AC for 100 to 120 V AC, 20 V AC for 200 to 230 V AC, and 10 V DC or less for 100 to 110 V DC.
*6. With DC power-supply-voltage type only, the product is equipped with a counter electromotive force prevention diode.
Performance
| Format | Series H3Y-2 (-0) | Series H3Y-4 (-0) | |
|---|---|---|---|
| Variations In Operating Time | ±1% or less (at maximum scale time)*1 | ||
| Set Error | ±10% ±50 ms or less (at maximum scale time) | ||
| Recovery Time | 0.1 s or less (including recovery during operation) | ||
| Voltage Effect | ±2% or less (at maximum scale time)*1 | ||
| Temperature Effect | ±2% or less (at maximum scale time)*1 | ||
| Insulation Resistance | 100 MΩ or more (measurement at 500 V DC megger) | ||
| Withstand Voltage | 2,000 V AC, 50/60 Hz, 1 min (between conductive part terminal and exposed non-charging metal part, excluding the terminal screw part) 2,000 V AC, 50/60 Hz, 1 min (between control output and operation circuit) 2,000 V AC, 50/60 Hz, 1 min (2-pole type between different pole contacts) 1,500 V AC, 50/60 Hz, 1 min (4-pole type between different pole contacts) 1,000 V AC, 50/60 Hz, 1 min (between discontinuous contacts) | ||
| Impulse Voltage | 3 kV between power supply terminals; however, 1 kV for 12 V DC, 24 V DC and 48 V DC, 4.5 kV between the conductive part terminal and exposed non-charging metal part; however, 1.5 kV for 12 V DC, 24 V DC and 48 V DC | ||
| Noise Resistance | Square-wave noise by noise simulator (pulse width 100 ns/1 μs rise 1 ns) ±1.5 kV | ||
| Electrostatic Strength | 4 kV (Malfunction), 8kV (Destruction) | ||
| Vibration | Endurance | 10 to 55 Hz, half amplitude 0.75 mm, 3 directions, 1 h each | |
| Malfunction | 10 to 55 Hz, half amplitude 0.5 mm, 3 directions, 10 min each | ||
| Shock | Endurance | 1,000 m/s2, 6 directions, 3 times each*2 | |
| Malfunction | 100m/s2, 6 directions, 3 times each | ||
| Life | Mechanical | 10 million operations or more (no load, switching frequency 1,800 operations/h) | |
| Electrical | 2-pole, 500,000 operations or more (250 V AC, 5 A, resistive load, switching frequency 1,800 operations/h) (room temperature) 4-pole, 200,000 operations or more (250 V AC, 3 A, resistive load, switching frequency 1,800 operations/h) (room temperature) | ||
| Protective Structure | IP40 | ||
| Mass | Approx. 50 g | ||
*1. For 0.5 s specifications, ±10 ms is added to the above characteristics.
*2. Condition when carrying out impact resistance testing with the timer alone.
- *Refer to the catalog for types and models other than those listed above.
| Part Number |
|---|
| H3Y-2 AC100-120 60M |
| H3Y-2 AC200-230 60M |
| H3Y-2 DC24 60M |
| H3Y-4 DC24 60M |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Time specifications (s) | Power Supply Voltage | Rated power supply voltage (V) | Contact Configuration |
|---|---|---|---|---|---|---|---|---|
MYR 190.72 | 1 Piece(s) | 1 Day(s) | 2.0m to 60m | AC-dedicated | AC100 to 120 | Time Limit 2c | ||
MYR 190.72 | 1 Piece(s) | 1 Day(s) | 2.0m to 60m | AC-dedicated | AC200 to 230 | Time Limit 2c | ||
MYR 163.61 | 1 Piece(s) | 1 Day(s) | 2.0m to 60m | Dedicated to DC | DC24 | Time Limit 2c | ||
MYR 175.20 | 1 Piece(s) | 1 Day(s) | 2.0m to 60m | Dedicated to DC | DC24 | Time Limit 4c |
Loading...
Basic Information
| Type | Timer | Display method | Analog | Output Method | Relay |
|---|---|---|---|---|---|
| Representative Standard | CE / UL / CCC / CSA | Dimension vertical(mm) | 52.6 | Dimension width(mm) | 28 |
| Dimension depth(mm) | 21.5 | Time ranges = N | 1 range | Terminal shape | Plug-in terminal |
Specification/Dimensions
-
Power Supply Voltage
- AC-dedicated
- Dedicated to DC
-
Rated power supply voltage(V)
- DC12
- AC24
- DC24
- AC100 to 120
- AC200 to 230
-
Contact Configuration
- Time Limit 2c
- Time Limit 4c
-
Time specifications(s)
Days to Ship
-
- All
- 1 Day(s) or Less
- 3 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Solid State/Timer H3YN
- Digital Timer H5CZ
- Total counter/Time counter (DIN48 × 24) H7GP
- Electronic Counter H7CZ
- Analog timer H3AM
- Solid State/Timer H3DK-H
- Digital Time Switch H5S
- Digital timer H5CX-□-N
Customers Who Viewed This Item Also Viewed
-
Option Product for Relay Common SocketOMRON
Standard Price : MYR 6.86-
Days to Ship : 1 Day(s) or more
-
-
-
Control Panel Relay Socket (MISUMI GPR Series Test)MISUMI_Test
Standard Price : MYR 27.39
Days to Ship : 1 Day(s)
-
Control Panel Relay Socket (MISUMI GPR Series Test)
MISUMI_Test
Standard Price : MYR 27.39
Days to Ship : 1 Day(s)
-
-
Common Optional Products for Relay, Others m_series_language_223330OMRON
Standard Price : MYR 2.08-
Days to Ship : 1 Day(s)
-
-
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy