[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Manifold Blocks - Pneumatic - Lateral Through Hole, L-Shaped Hole (Part Numbers)

MISUMI_Test

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
BMUAFZB8-Q[1,2,5]-R[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMUAFZB8-Q[1,2,5]-R[1,2,5]-[G1N,G2N]-K[1,2,5]
BMUAFZB8-Q[1,2,5]-R[1,2,5]-G[1,2,5]-[K1N,K2N]
BMUAFZB8-Q[1,2,5]-R[1,2,5]-G[1,2,5]-K[1,2,5]
BMUAFZT1-[Q1N,Q2N]-[R1N,R2N]-[G1N,G2N]-[K1N,K2N]
BMUAFZT1-[Q1N,Q2N]-[R1N,R2N]-[G1N,G2N]-K[1,2,5]
BMUAFZT1-[Q1N,Q2N]-[R1N,R2N]-G[1,2,5]-[K1N,K2N]
BMUAFZT1-[Q1N,Q2N]-[R1N,R2N]-G[1,2,5]-K[1,2,5]
BMUAFZT1-[Q1N,Q2N]-R[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMUAFZT1-[Q1N,Q2N]-R[1,2,5]-[G1N,G2N]-K[1,2,5]
BMUAFZT1-[Q1N,Q2N]-R[1,2,5]-G[1,2,5]-[K1N,K2N]
BMUAFZT1-[Q1N,Q2N]-R[1,2,5]-G[1,2,5]-K[1,2,5]
BMUAFZT1-Q[1,2,5]-[R1N,R2N]-[G1N,G2N]-[K1N,K2N]
BMUAFZT1-Q[1,2,5]-[R1N,R2N]-[G1N,G2N]-K[1,2,5]
BMUAFZT1-Q[1,2,5]-[R1N,R2N]-G[1,2,5]-[K1N,K2N]
BMUAFZT1-Q[1,2,5]-[R1N,R2N]-G[1,2,5]-K[1,2,5]
BMUAFZT1-Q[1,2,5]-R[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMUAFZT1-Q[1,2,5]-R[1,2,5]-[G1N,G2N]-K[1,2,5]
BMUAFZT1-Q[1,2,5]-R[1,2,5]-G[1,2,5]-[K1N,K2N]
BMUAFZT1-Q[1,2,5]-R[1,2,5]-G[1,2,5]-K[1,2,5]
BMUAFZT7-[Q1N,Q2N]-[R1N,R2N]-[G1N,G2N]-[K1N,K2N]
BMUAFZT7-[Q1N,Q2N]-[R1N,R2N]-[G1N,G2N]-K[1,2,5]
BMUAFZT7-[Q1N,Q2N]-[R1N,R2N]-G[1,2,5]-[K1N,K2N]
BMUAFZT7-[Q1N,Q2N]-[R1N,R2N]-G[1,2,5]-K[1,2,5]
BMUAFZT7-[Q1N,Q2N]-R[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMUAFZT7-[Q1N,Q2N]-R[1,2,5]-[G1N,G2N]-K[1,2,5]
BMUAFZT7-[Q1N,Q2N]-R[1,2,5]-G[1,2,5]-[K1N,K2N]
BMUAFZT7-[Q1N,Q2N]-R[1,2,5]-G[1,2,5]-K[1,2,5]
BMUAFZT7-Q[1,2,5]-[R1N,R2N]-[G1N,G2N]-[K1N,K2N]
BMUAFZT7-Q[1,2,5]-[R1N,R2N]-[G1N,G2N]-K[1,2,5]
BMUAFZT7-Q[1,2,5]-[R1N,R2N]-G[1,2,5]-[K1N,K2N]
BMUAFZT7-Q[1,2,5]-[R1N,R2N]-G[1,2,5]-K[1,2,5]
BMUAFZT7-Q[1,2,5]-R[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMUAFZT7-Q[1,2,5]-R[1,2,5]-[G1N,G2N]-K[1,2,5]
BMUAFZT7-Q[1,2,5]-R[1,2,5]-G[1,2,5]-[K1N,K2N]
BMUAFZT7-Q[1,2,5]-R[1,2,5]-G[1,2,5]-K[1,2,5]
BMUAL3-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUAL5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALA5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALANA4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALANA5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAP2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAP6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAPNA5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAPZB2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAPZB4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAPZT2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAPZT4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAPZT6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALAT2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAT3-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAZB1-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAZB2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAZB5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAZB6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALAZT6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALNA1-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALNA3-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALNA6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALP3-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALP4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPNA4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPT3-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZB2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZB4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZB5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZB6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZT2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZT3-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZT4-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZT5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALPZT6-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]-P[35-60/1]
BMUALZB1-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALZB2-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
BMUALZT5-Q[2,3,4]-R[2,3,4]-G[2,3,4]-K[2,3,4]
G-BMUAC1-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUAC2-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUAC4-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUAC5-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUAC6-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUAC7-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUACA5-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUACA7-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUACAP3-Q[1,5]-R[1,5]-G1-K1-P[15-50/1]
G-BMUACAP8-Q[1,5]-R[1,5]-G1-K1-P[15-35/1]
G-BMUACAPT7-Q[1,5]-R[1,5]-G1-K1-P[15-40/1]
G-BMUACAT5-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUACAT6-Q[1,5]-R[1,5]-G[1,5]-K[1,5]
G-BMUACP2-Q[1,5]-R[1,5]-G1-K1-P[15-50/1]
G-BMUACP5-Q[1,5]-R[1,5]-G1-K1-P[15-50/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Surface Treatment	Block Size (mm)	Number of Circuits	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Drawing G Part Thread Dia. NPT Selection [G]	Drawing K Part Thread Dia. NPT Selection [K]	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing R Part Thread Dia. NPT Selection [R]	Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)	Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)	Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	8	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	8	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	8	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	8	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	30	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	-	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	-	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	1 ～ 5	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	-	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	-	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	1 ～ 5	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	1/4 [G2N] / 1/8 [G1N]	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	1/4 [K2N] / 1/8 [K1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	30 x 40	7	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	30	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	3	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	1	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	1	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	3	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	ZB (Back Surface Counterbore)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	3	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	4	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	6	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s) or more	-	Not Provided	50 x 50	2	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	-	Not Provided	50 x 50	5	Standard Thread {PT, M (Coarse) Thread}	ZT (Counterbore Tapped)	40	Fixed Type	-	-	-	-	-	-	-	-	2 ～ 4	2 ～ 4	2 ～ 4	2 ～ 4
-	1 Piece(s)	4 Day(s)	10	Not Provided	25 x 25	1	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	2	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	4	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	5	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	6	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	7	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	10	Clear Anodize	25 x 25	5	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	25 x 25	7	G (PF) Thread	Not Specified (Counterbore)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	25 x 25	3	G (PF) Thread	Not Specified (Counterbore)	15 ～ 50	Configurable Type	-	-	-	-	-	-	-	-	1	1	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	25 x 25	8	G (PF) Thread	Not Specified (Counterbore)	15 ～ 35	Configurable Type	-	-	-	-	-	-	-	-	1	1	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	25 x 25	7	G (PF) Thread	T (Tapped)	15 ～ 40	Configurable Type	-	-	-	-	-	-	-	-	1	1	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s) or more	-	Clear Anodize	25 x 25	5	G (PF) Thread	T (Tapped)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Clear Anodize	25 x 25	6	G (PF) Thread	T (Tapped)	15	Fixed Type	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	2	G (PF) Thread	Not Specified (Counterbore)	15 ～ 50	Configurable Type	-	-	-	-	-	-	-	-	1	1	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Not Provided	25 x 25	5	G (PF) Thread	Not Specified (Counterbore)	15 ～ 50	Configurable Type	-	-	-	-	-	-	-	-	1	1	1 ～ 5	1 ～ 5

Basic Information

Shape	Lateral Through Hole, L-Shaped Hole	Material	Aluminum Alloy	Application	Pneumatic

Configure

1,280 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Surface Treatment
- Not Provided
- Clear Anodize
Clear
Block Size(mm)
- 25 x 25
- 30 x 40
- 50 x 50
Clear
Number of Circuits
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, M (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- ZB (Back Surface Counterbore)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
15

30

40
[15-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Drawing G Part Thread Dia. NPT Selection [G]
- 1/4 [G2N]
- 1/8 [G1N]
Clear
Drawing K Part Thread Dia. NPT Selection [K]
- 1/4 [K2N]
- 1/8 [K1N]
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
Clear
Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
3

4
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
1

2

3

4

5
Clear
type
- BMUAC
- BMUACA
- BMUACAP
- BMUACP
- BMUAF
- BMUAFA
- BMUAFAP
- BMUAFP
- BMUAL
- BMUALA
- BMUALAP
- BMUALP
- G-BMUAC
- G-BMUACA
- G-BMUACAP
- G-BMUACP
- G-BMUAF
- G-BMUAFA
- G-BMUAFAP
- G-BMUAFP
- G-BMUAL
- G-BMUALA
- G-BMUALAP
- G-BMUALP
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Tubes/Nylon
MISUMI_Test Days to Ship : 3 Day(s) or more
One-Touch Couplings - Male Connectors - Outlined with Hex
MISUMI_Test Standard Price : MYR 3.63- Days to Ship : 1 Day(s) or more
One-Touch Couplings - Blind Plugs
MISUMI_Test Standard Price : MYR 4.84- Days to Ship : 1 Day(s) or more
Flow Rate Control Valves - 90 Deg. Elbow
MISUMI_Test Standard Price : MYR 32.67- Days to Ship : 1 Day(s)

Customers Who Viewed This Item Also Viewed

Manifold Blocks - Hydraulic / Pneumatic - T Shaped Hole
MISUMI_Test

Standard Price : MYR 53.50-

Days to Ship : 1 Day(s) or more
Manifold Blocks - Hydraulic / Pneumatic - Blind Lateral Hole
MISUMI_Test

Days to Ship : 6 Day(s) or more
Manifold Blocks - Hydraulic / Pneumatic - Lateral Through Hole, L-Shaped Hole
MISUMI_Test

Standard Price : MYR 63.13-

Days to Ship : 1 Day(s) or more
Manifold Blocks - Hydraulic / Pneumatic - Lateral Through Hole, Upper Hole
MISUMI_Test

Standard Price : MYR 59.51-

Days to Ship : 1 Day(s) or more
Manifold Blocks - Hydraulic / Pneumatic - Blind Lateral Hole,Vertical Semi-Through Hole / L-Shaped Hole
MISUMI_Test

Days to Ship : 4 Day(s) or more
Manifold Blocks - Hydraulic - T Shaped Hole
MISUMI_Test

Days to Ship : 4 Day(s) or more
Manifold Blocks - Pneumatic - Lateral Through Hole, Upper Hole
MISUMI_Test

Days to Ship : 4 Day(s) or more
Manifold Blocks - Pneumatic - Lateral Through Hole, Vertical Semi-Through Hole
MISUMI_Test

Days to Ship : 4 Day(s) or more
Manifold Blocks - Pneumatic - T Shaped Hole
MISUMI_Test

Days to Ship : 4 Day(s) or more
Manifold Blocks - Pneumatic - Lateral and Vertical Through Hole / Lateral Through Hole, Upper Hole
MISUMI_Test

Standard Price : MYR 67.41-

Days to Ship : 1 Day(s) or more
Manifold Blocks - Hydraulic / Pneumatic - Lateral Through Hole, Vertical Semi-Through Hole
MISUMI_Test

Standard Price : MYR 74.90-

Days to Ship : 2 Day(s) or more
Terminal Blocks - Hydraulic / Pneumatic - Vertical Through Hole
MISUMI_Test

Standard Price : MYR 56.71-

Days to Ship : 2 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Manifold Blocks - Pneumatic - Lateral Through Hole, L-Shaped Hole (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Surface Treatment

Block Size(mm)

Number of Circuits

Thread Size / Type

Mounting Hole Change

Pitch P(mm)

Pitch Standard / Configurable

Drawing G Part Thread Dia. NPT Selection [G]

Drawing K Part Thread Dia. NPT Selection [K]

Drawing Q Part Thread Dia. NPT Selection [Q]

Drawing R Part Thread Dia. NPT Selection [R]

Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)

Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm