Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole (Part Numbers)

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Both Ends Tapped with Cross-Drilled Hole/Wrench Flats:Related Image

Type					[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats			With Cross-Drilled Hole
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
SFJZ	SFUZ	-	SFHZ	-	SUJ2	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2: 58HRC~ SUS440C Equivalent: 56HRC~	-
SSFJZ	SSFUZ	-	SSFHZ	-	SUS440C Equivalent		-
PSFJZ	PSFUZ	-	PSFHZ	-	SUJ2		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJZ	PSSFUZ	-	PSSFHZ	-	SUS440C Equivalent
RSFJZ	-	-	RSFHZ	-	SUJ2		Low Temp. Black Chrome Plating
-	-	PSFGZ	-	PSGHZ	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGZ	-	-	SUS304	-

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	M	-	N	-	SC	-	H
SFJZ10 SSFHZ20	- -	200 500	- -	M5 M6	- -	N5 N10	-	SC10	-	H20

Part Number			L 1mm Increments	M (Coarse), N (Coarse) Selection											Wrench Flats Dimensions			D Tol.			C
Type		D	L 1mm Increments	M (Coarse), N (Coarse) Selection											SC	W	ℓ₁	g6	h5	f8	C
(With Wrench Flats) (D Tol. g6) SFJZ SSFJZ PSFJZ PSSFJZ (D Tol. f8) PSFGZ PSSFGZ	(D Tol. h5) SFUZ SSFUZ PSFUZ PSSFUZ	6	20~ 800	3											SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]For Details of Wrench Flats, see >> P.142	5	8	-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	20~1000	3	4	5										7	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	20~1000	3	4	5	6									8	8	-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	20~1200		4	5	6	8								10	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	25~1200		4	5	6	8								11	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	25~1200		4	5	6	8	10							13	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200		4	5	6	8	10							14	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200		4	5	6	8	10	12						16	10	-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200		4	5	6	8	10	12						17	10	-0.007 -0.020	0 -0.008	-0.020 -0.053	1.0 or Less
		25	35~1200		4	5	6	8	10	12	16					22	10	-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500				6	8	10	12	16	20				27	15	-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500					8	10	12	16	20	24			30	15	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500						10	12	16	20	24	30		36	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500							12	16	20	24	30		41	20	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

Part Number		L 1mm Increments	M (Coarse), N (Coarse) Selection									Wrench Flats Dimensions			D Tol.	C
Type	D	L 1mm Increments	M (Coarse), N (Coarse) Selection									SC	W	ℓ₁	g6	C
(With Wrench Flats) (D Tol. g6) Low Temp. Black Chrome Plating RSFJZ	6	20~500	3									SC = 1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]For Details of Wrench Flats, see >> P.142	5	8	-0.004 -0.012	0.5 or Less
	8	20~500	3	4	5								7	8	-0.005 -0.014	0.5 or Less
	10	20~500	3	4	5	6							8	8	-0.005 -0.014	0.5 or Less
	12	20~500		4	5	6	8						10	10	-0.006 -0.017	0.5 or Less
	13	25~500		4	5	6	8						11	10	-0.006 -0.017	0.5 or Less
	15	25~500		4	5	6	8	10					13	10	-0.006 -0.017	0.5 or Less
	16	30~500		4	5	6	8	10					14	10	-0.006 -0.017	0.5 or Less
	18	30~500		4	5	6	8	10	12				16	10	-0.006 -0.017	0.5 or Less
	20	30~500		4	5	6	8	10	12				17	10	-0.007 -0.020	1.0 or Less
	25	35~500		4	5	6	8	10	12	16			22	10	-0.007 -0.020	1.0 or Less
	30	35~500				6	8	10	12	16	20		27	15	-0.007 -0.020	1.0 or Less

Part Number		L 1mm Increments	M (Coarse), N (Coarse) Selection									Cross-Drilled Hole Dimensions		D Tol.		C
Type	D	L 1mm Increments	M (Coarse), N (Coarse) Selection									H	d	g6	f8	C
(With Cross-Drilled Hole) (D Tol. g6) SFHZ SSFHZ PSFHZ PSSFHZ RSFHZ (D Tol. f8) PSGHZ [ ! ]8≤D≤30 and L≤500 are applicable for Shafts with Cross-Drilled Hole.	8	20~500	3	4	5							H=1mm Increment [ ! ]L≥H+d/2+Nx2.5+6 [ ! ]H≥Mx2.5+d/2+6	3	-0.005 -0.014	-0.013 -0.035	0.5 or Less
	10	20~500	3	4	5	6							3	-0.005 -0.014	-0.013 -0.035	0.5 or Less
	12	20~500		4	5	6	8						3	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	13	25~500		4	5	6	8						4	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	15	25~500		4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	16	30~500		4	5	6	8	10					4	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	18	30~500		4	5	6	8	10	12				6	-0.006 -0.017	-0.016 -0.043	0.5 or Less
	20	30~500		4	5	6	8	10	12				6	-0.007 -0.020	-0.020 -0.053	1.0 or Less
	25	35~500		4	5	6	8	10	12	16			7	-0.007 -0.020	-0.020 -0.053	1.0 or Less
	30	35~500				6	8	10	12	16	20		7	-0.007 -0.020	-0.020 -0.053	1.0 or Less

[ ! ]L requires Mx2+Nx2≤L. [ ! ]When Mx2.5+4+Nx2.5+4≥L, tap pilot holes may go through and the effective length of the smaller tap part may be shortened.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
PSFJZ20-[30-1200/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-MD[6,8,10,12]-ND[6,8,10,12]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-MD[6,8,10,12]-NSC[8,10,12,14]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-MSC[8,10,12,14]-ND[6,8,10,12]-SC[0-1190/1]
PSFJZ20-[30-1200/1]-MSC[8,10,12,14]-NSC[8,10,12,14]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-M[4,5,6,8,10,12,16]-ND[6,8,10,12,16]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-MD[6,8,10,12,16]-N[4,5,6,8,10,12,16]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-MD[6,8,10,12,16]-ND[6,8,10,12,16]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-MD[6,8,10,12,16]-NSC[8,10,12,14,18]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-MSC[8,10,12,14,18]-N[4,5,6,8,10,12,16]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-MSC[8,10,12,14,18]-ND[6,8,10,12,16]-SC[0-1190/1]
PSFJZ25-[35-1200/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1190/1]
PSFJZ30-[35-1500/1]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-M[6,8,10,12,16,20]-ND[6,8,10,12,16,20]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-M[6,8,10,12,16,20]-NSC[8,10,12,14,18]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-MD[6,8,10,12,16,20]-NSC[8,10,12,14,18]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-MSC[8,10,12,14,18]-N[6,8,10,12,16,20]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-MSC[8,10,12,14,18]-ND[6,8,10,12,16,20]-SC[0-1485/1]
PSFJZ30-[35-1500/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1485/1]
PSGHZ8-[20-500/1]-M[3,4,5]-N[3,4,5]-H[0-496/1]
PSGHZ10-[20-500/1]-M[3,4,5,6]-N[3,4,5,6]-H[0-496/1]
PSGHZ10-[20-500/1]-M[3,4,5,6]-ND6-H[0-496/1]
PSGHZ10-[20-500/1]-MD6-N[3,4,5,6]-H[0-496/1]
PSGHZ10-[20-500/1]-MD6-ND6-H[0-496/1]
PSGHZ12-[20-500/1]-M[4,5,6,8]-N[4,5,6,8]-H[0-496/1]
PSGHZ12-[20-500/1]-M[4,5,6,8]-ND[6,8]-H[0-496/1]
PSGHZ12-[20-500/1]-M[4,5,6,8]-NSC8-H[0-496/1]
PSGHZ12-[20-500/1]-MD[6,8]-N[4,5,6,8]-H[0-496/1]
PSGHZ12-[20-500/1]-MD[6,8]-ND[6,8]-H[0-496/1]
PSGHZ12-[20-500/1]-MD[6,8]-NSC8-H[0-496/1]
PSGHZ12-[20-500/1]-MSC8-N[4,5,6,8]-H[0-496/1]
PSGHZ12-[20-500/1]-MSC8-ND[6,8]-H[0-496/1]
PSGHZ12-[20-500/1]-MSC8-NSC8-H[0-496/1]
PSGHZ13-[25-500/1]-M[4,5,6,8]-N[4,5,6,8]-H[0-496/1]
PSGHZ13-[25-500/1]-M[4,5,6,8]-ND[6,8]-H[0-496/1]
PSGHZ13-[25-500/1]-M[4,5,6,8]-NSC8-H[0-496/1]
PSGHZ13-[25-500/1]-MD[6,8]-N[4,5,6,8]-H[0-496/1]
PSGHZ13-[25-500/1]-MD[6,8]-ND[6,8]-H[0-496/1]
PSGHZ13-[25-500/1]-MD[6,8]-NSC8-H[0-496/1]
PSGHZ13-[25-500/1]-MSC8-N[4,5,6,8]-H[0-496/1]
PSGHZ13-[25-500/1]-MSC8-ND[6,8]-H[0-496/1]
PSGHZ13-[25-500/1]-MSC8-NSC8-H[0-496/1]
PSGHZ15-[25-500/1]-M[4,5,6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-M[4,5,6,8,10]-ND[6,8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-M[4,5,6,8,10]-NSC[8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-MD[6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-MD[6,8,10]-ND[6,8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-MD[6,8,10]-NSC[8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-MSC[8,10]-N[4,5,6,8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-MSC[8,10]-ND[6,8,10]-H[0-496/1]
PSGHZ15-[25-500/1]-MSC[8,10]-NSC[8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-M[4,5,6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-M[4,5,6,8,10]-ND[6,8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-M[4,5,6,8,10]-NSC[8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-MD[6,8,10]-N[4,5,6,8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-MD[6,8,10]-ND[6,8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-MD[6,8,10]-NSC[8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-MSC[8,10]-N[4,5,6,8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-MSC[8,10]-ND[6,8,10]-H[0-496/1]
PSGHZ16-[30-500/1]-MSC[8,10]-NSC[8,10]-H[0-496/1]
PSGHZ20-[30-500/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSGHZ20-[30-500/1]-M[4,5,6,8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSGHZ20-[30-500/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14]-H[0-495/1]
PSGHZ20-[30-500/1]-MD[6,8,10,12]-N[4,5,6,8,10,12]-H[0-495/1]
PSGHZ20-[30-500/1]-MD[6,8,10,12]-ND[6,8,10,12]-H[0-495/1]
PSGHZ20-[30-500/1]-MD[6,8,10,12]-NSC[8,10,12,14]-H[0-495/1]
PSGHZ20-[30-500/1]-MSC[8,10,12,14]-N[4,5,6,8,10,12]-H[0-495/1]
PSGHZ20-[30-500/1]-MSC[8,10,12,14]-ND[6,8,10,12]-H[0-495/1]
PSGHZ20-[30-500/1]-MSC[8,10,12,14]-NSC[8,10,12,14]-H[0-495/1]
PSGHZ25-[35-500/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16]-H[0-494/1]
PSGHZ25-[35-500/1]-M[4,5,6,8,10,12,16]-ND[6,8,10,12,16]-H[0-494/1]
PSGHZ25-[35-500/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18]-H[0-494/1]
PSGHZ25-[35-500/1]-MD[6,8,10,12,16]-N[4,5,6,8,10,12,16]-H[0-494/1]
PSGHZ25-[35-500/1]-MD[6,8,10,12,16]-ND[6,8,10,12,16]-H[0-494/1]
PSGHZ25-[35-500/1]-MD[6,8,10,12,16]-NSC[8,10,12,14,18]-H[0-494/1]
PSGHZ25-[35-500/1]-MSC[8,10,12,14,18]-N[4,5,6,8,10,12,16]-H[0-494/1]
PSGHZ25-[35-500/1]-MSC[8,10,12,14,18]-ND[6,8,10,12,16]-H[0-494/1]
PSGHZ25-[35-500/1]-MSC[8,10,12,14,18]-NSC[8,10,12,14,18]-H[0-494/1]
PSGHZ30-[35-500/1]-M[6,8,10,12,16,20]-N[6,8,10,12,16,20]-H[0-494/1]
PSGHZ30-[35-500/1]-M[6,8,10,12,16,20]-ND[6,8,10,12,16,20]-H[0-494/1]
PSGHZ30-[35-500/1]-M[6,8,10,12,16,20]-NSC[8,10,12,14,18]-H[0-494/1]
PSGHZ30-[35-500/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20]-H[0-494/1]
PSGHZ30-[35-500/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20]-H[0-494/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	TEST	Heat Treatment	Surface Treatment	TEST (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Add Wrench Flats at One Location [SC] (mm)	Change Tapped Thread M to Fine One [MSC] (mm)	Change Tapped Thread N to Fine One [NSC] (mm)	H (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND] (mm)
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	8 ～ 14	-	4 ～ 12	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	8 ～ 14	-	-	-	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	8 ～ 14	-	-	-	4 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	8 ～ 14	-	-	-	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	8 ～ 14	8 ～ 14	-	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	4 ～ 16	4 ～ 16	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	4 ～ 16	-	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	8 ～ 18	-	4 ～ 16	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	-	4 ～ 16	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	-	-	-	-	6 ～ 16	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	-	8 ～ 18	-	-	-	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	8 ～ 18	-	-	-	4 ～ 16	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	8 ～ 18	-	-	-	-	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	0 ～ 1190	8 ～ 18	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	-	-	-	6 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	-	-	-	6 ～ 20	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	-	8 ～ 18	-	6 ～ 20	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	-	-	-	-	6 ～ 20	6 ～ 20	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	-	-	-	-	-	6 ～ 20	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	-	8 ～ 18	-	-	-	6 ～ 20	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	8 ～ 18	-	-	-	6 ～ 20	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	8 ～ 18	-	-	-	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	0 ～ 1485	8 ～ 18	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	8	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	3 ～ 5	3 ～ 5	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	3 ～ 6	3 ～ 6	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	3 ～ 6	-	-	6
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	3 ～ 6	6	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	-	6	6
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	-	8	0 ～ 496	4 ～ 8	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	-	8	0 ～ 496	-	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	8	-	0 ～ 496	-	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	8	-	0 ～ 496	-	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 500	f8	No Induction Hardening	-	8	8	0 ～ 496	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 8	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 8	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	8	0 ～ 496	4 ～ 8	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	4 ～ 8	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	-	6 ～ 8	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	-	8	0 ～ 496	-	-	6 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	8	-	0 ～ 496	-	4 ～ 8	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	8	-	0 ～ 496	-	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 500	f8	No Induction Hardening	-	8	8	0 ～ 496	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	8 ～ 10	0 ～ 496	4 ～ 10	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	-	8 ～ 10	0 ～ 496	-	-	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	8 ～ 10	-	0 ～ 496	-	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	8 ～ 10	-	0 ～ 496	-	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 500	f8	No Induction Hardening	-	8 ～ 10	8 ～ 10	0 ～ 496	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 10	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	4 ～ 10	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	-	8 ～ 10	0 ～ 496	4 ～ 10	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	4 ～ 10	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 496	-	-	6 ～ 10	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	-	8 ～ 10	0 ～ 496	-	-	6 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	8 ～ 10	-	0 ～ 496	-	4 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	8 ～ 10	-	0 ～ 496	-	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 500	f8	No Induction Hardening	-	8 ～ 10	8 ～ 10	0 ～ 496	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 495	4 ～ 12	4 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 495	4 ～ 12	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	-	8 ～ 14	0 ～ 495	4 ～ 12	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 495	-	4 ～ 12	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 495	-	-	6 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	-	8 ～ 14	0 ～ 495	-	-	6 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	8 ～ 14	-	0 ～ 495	-	4 ～ 12	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	8 ～ 14	-	0 ～ 495	-	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 500	f8	No Induction Hardening	-	8 ～ 14	8 ～ 14	0 ～ 495	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	4 ～ 16	4 ～ 16	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	4 ～ 16	-	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	-	8 ～ 18	0 ～ 494	4 ～ 16	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	-	4 ～ 16	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	-	-	6 ～ 16	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	-	8 ～ 18	0 ～ 494	-	-	6 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	8 ～ 18	-	0 ～ 494	-	4 ～ 16	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	8 ～ 18	-	0 ～ 494	-	-	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 500	f8	No Induction Hardening	-	8 ～ 18	8 ～ 18	0 ～ 494	-	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	6 ～ 20	6 ～ 20	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	6 ～ 20	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 500	f8	No Induction Hardening	-	-	8 ～ 18	0 ～ 494	6 ～ 20	-	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	-	6 ～ 20	6 ～ 20	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 500	f8	No Induction Hardening	-	-	-	0 ～ 494	-	-	6 ～ 20	6 ～ 20

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	Tapped
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

690 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

TEST
- Steel_
  - SUJ2
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel_
  - SUS304
  - SUS440C Equivalent
  - SUS440C or 13Cr stainless
- 00030
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
TEST(Ø)
6

8

10

12

13

15

16

20

25

30

40
Clear
Length L(mm)
[20-1500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Add Wrench Flats at One Location [SC](mm)
[0-1485/1mm Unit(s)]
Clear
Change Tapped Thread M to Fine One [MSC](mm)
8

10

12

14

18
Clear
Change Tapped Thread N to Fine One [NSC](mm)
8

10

12

14

18
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)
6

8

10

12

16

20
Clear
type
- PSFGZ
- PSFHZ
- PSFJZ
- PSGHZ
- PSSFGZ
- PSSFHZ
- PSSFJZ
- SFHZ
- SFJZ
- SSFHZ
- SSFJZ
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI_Test Days to Ship : 3 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI_Test Standard Price : MYR 58.85- Days to Ship : 1 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI_Test Standard Price : MYR 63.56- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI_Test Standard Price : MYR 13.15- Days to Ship : 1 Day(s)

Customers Who Viewed This Item Also Viewed

Metal Washers - T Dimension Configurable, Precision Class
MISUMI_Test

Days to Ship : 1 Day(s) or more
Linear Shafts-Both Ends Tapped
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-Straight Type One End Threaded with Undercut
MISUMI_Test

Days to Ship : 3 Day(s) or more
Hex Posts - One End Threaded One End Tapped
MISUMI_Test

Days to Ship : 3 Day(s)
Stop Pins - Screw Flat Type
MISUMI_Test

Days to Ship : 1 Day(s) or more
Metal Washers - Standard / Precision Class
MISUMI_Test

Days to Ship : 1 Day(s) or more
Linear Shafts-One End Tapped
MISUMI_Test

Days to Ship : 3 Day(s) or more
Metal Washers - Thickness +-0.10 & +-0.01 mm/Dimensions Configurable
MISUMI_Test

Days to Ship : 3 Day(s) or more
Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type
MISUMI_Test

Days to Ship : 3 Day(s) or more
Hex Posts - Both Ends Tapped
MISUMI_Test

Days to Ship : 3 Day(s)
Adjusting Stopper Screws-Hex Socket
MISUMI_Test

Standard Price : MYR 11.77-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole (Part Numbers)

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

TEST

Heat Treatment

Surface Treatment

TEST(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Add Wrench Flats at One Location [SC](mm)

Change Tapped Thread M to Fine One [MSC](mm)

Change Tapped Thread N to Fine One [NSC](mm)

H(mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [N](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [ND](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm