Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts-One End Tapped

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Type			[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
D Tol. g6	D Tol. h5	D Tol. f8	[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
SFJT	SFUT	-	SUJ2	Effective Hardened Depth of Induction Hardening >>P.142 SUJ2: 58HRC~ SUS440C Equivalent: 56HRC~	-
SSFJT	SSFUT	-	SUS440C Equivalent		-
PSFJT	PSFUT	-	SUJ2		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFJT	PSSFUT	-	SUS440C Equivalent
RSFJT	-	-	SUJ2		Low Temp. Black Chrome Plating
-	-	PSFGT	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
-	-	PSSFGT	SUS304	-

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ]Full Length Hardness Guaranteed Shafts p1_155
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ]Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	M
SFJT8	-	200	-	M4
RSFJT20	-	325	-	M8

Part Number			L 1mm Increments	M (Coarse) Selection													D Tol.			C
Type		D	L 1mm Increments	M (Coarse) Selection													g6	h5	f8	C
(D Tol. g6) SFJT SSFJT PSFJT PSSFJT (D Tol. f8) PSFGT (D≥6) PSSFGT (D≥6)	(D Tol. h5) SFUT SSFUT PSFUT PSSFUT	4	20~ 300	2													-0.004 -0.012	0 -0.005	-	0.2 or Less
		5	20~ 400		2.6	3											-0.004 -0.012	0 -0.005	-	0.2 or Less
		6	15~ 800			3											-0.004 -0.012	0 -0.005	-0.010 -0.028	0.5 or Less
		8	15~1000			3	4	5									-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		10	15~1000			3	4	5	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	0.5 or Less
		12	15~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		13	15~1200				4	5	6	8							-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		15	15~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		16	30~1200				4	5	6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		18	30~1200				4	5	6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	0.5 or Less
		20	30~1200				4	5	6	8	10	12					-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		25	35~1200				4	5	6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		30	35~1500						6	8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1.0 or Less
		35	35~1500							8	10	12	16	20	24		-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		40	50~1500								10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less
		50	65~1500									12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1.0 or Less

Part Number		L 1mm Increments	M (Coarse) Selection											D Tol.	C
Type	D	L 1mm Increments	M (Coarse) Selection											g6	C
(D Tol. g6) Low Temp. Black Chrome Plating RSFJT	4	20~300	2											-0.004 -0.012	0.2 or Less
	5	20~400		2.6	3									-0.004 -0.012	0.2 or Less
	6	20~500			3									-0.004 -0.012	0.5 or Less
	8	20~500			3	4	5							-0.005 -0.014	0.5 or Less
	10	20~500			3	4	5	6						-0.005 -0.014	0.5 or Less
	12	20~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	13	25~500				4	5	6	8					-0.006 -0.017	0.5 or Less
	15	25~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	16	30~500				4	5	6	8	10				-0.006 -0.017	0.5 or Less
	18	30~500				4	5	6	8	10	12			-0.006 -0.017	0.5 or Less
	20	30~500				4	5	6	8	10	12			-0.007 -0.020	1.0 or Less
	25	35~500				4	5	6	8	10	12	16		-0.007 -0.020	1.0 or Less
	30	35~500						6	8	10	12	16	20	-0.007 -0.020	1.0 or Less

[ ! ]When Mx2.5+4≥L, tap pilot holes may go through.

Alterations

One End Tapped:Related Image

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
PSFGT6-[20-600/1]-M3
PSFGT8-[20-800/1]-M[3,4,5]
PSFGT10-[20-800/1]-M[3,4,5,6]
PSFGT10-[20-800/1]-MD6
PSFGT12-[20-1000/1]-M[4,5,6,8]
PSFGT12-[20-1000/1]-MD[6,8]
PSFGT12-[20-1000/1]-MSC8
PSFGT13-[25-1000/1]-M[4,5,6,8]
PSFGT13-[25-1000/1]-MD[6,8]
PSFGT13-[25-1000/1]-MSC8
PSFGT15-[25-1000/1]-M[4,5,6,8,10]
PSFGT15-[25-1000/1]-MD[6,8,10]
PSFGT15-[25-1000/1]-MSC[8,10]
PSFGT16-[30-1200/1]-M[4,5,6,8,10]
PSFGT16-[30-1200/1]-MD[6,8,10]
PSFGT16-[30-1200/1]-MSC[8,10]
PSFGT20-[30-1200/1]-M[4,5,6,8,10,12]
PSFGT20-[30-1200/1]-MD[6,8,10,12]
PSFGT20-[30-1200/1]-MSC[8,10,12,14]
PSFGT25-[35-1200/1]-M[4,5,6,8,10,12,16]
PSFGT25-[35-1200/1]-MD[6,8,10,12,16]
PSFGT25-[35-1200/1]-MSC[8,10,12,14,18]
PSFGT30-[35-1500/1]-M[6,8,10,12,16,20]
PSFGT30-[35-1500/1]-MD[6,8,10,12,16,20]
PSFGT30-[35-1500/1]-MSC[8,10,12,14,18]
PSFJT4-[20-300/1]-M2
PSFJT5
PSFJT6-[20-600/1]-M3
PSFJT8-[20-800/1]-M[3,4,5]
PSFJT10-[20-800/1]-M[3,4,5,6]
PSFJT10-[20-800/1]-MD6
PSFJT12-[20-1000/1]-M[4,5,6,8]
PSFJT12-[20-1000/1]-MD[6,8]
PSFJT12-[20-1000/1]-MSC8
PSFJT13-[25-1000/1]-M[4,5,6,8]
PSFJT13-[25-1000/1]-MD[6,8]
PSFJT13-[25-1000/1]-MSC8
PSFJT15-[25-1000/1]-M[4,5,6,8,10]
PSFJT15-[25-1000/1]-MD[6,8,10]
PSFJT15-[25-1000/1]-MSC[8,10]
PSFJT16-[30-1200/1]-M[4,5,6,8,10]
PSFJT16-[30-1200/1]-MD[6,8,10]
PSFJT16-[30-1200/1]-MSC[8,10]
PSFJT20-[30-1200/1]-M[4,5,6,8,10,12]
PSFJT20-[30-1200/1]-MD[6,8,10,12]
PSFJT20-[30-1200/1]-MSC[8,10,12,14]
PSFJT25-[35-1200/1]-M[4,5,6,8,10,12,16]
PSFJT25-[35-1200/1]-MD[6,8,10,12,16]
PSFJT25-[35-1200/1]-MSC[8,10,12,14,18]
PSFJT30-[35-1500/1]-M[6,8,10,12,16,20]
PSFJT30-[35-1500/1]-MD[6,8,10,12,16,20]
PSFJT30-[35-1500/1]-MSC[8,10,12,14,18]
SFJT4-[20-300/1]-M2
SFJT5
SFJT6-[20-600/1]-M3
SFJT8-[20-800/1]-M[3,4,5]
SFJT10-[20-800/1]-M[3,4,5,6]
SFJT10-[20-800/1]-MD6
SFJT12-[20-1000/1]-M[4,5,6,8]
SFJT12-[20-1000/1]-MD[6,8]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	TEST	Heat Treatment	Surface Treatment	TEST (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	Change Tapped Thread M to Fine One [MSC] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M] (mm)	Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD] (mm)
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	6	20 ～ 600	f8	No Induction Hardening	-	3	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	8	20 ～ 800	f8	No Induction Hardening	-	3 ～ 5	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 800	f8	No Induction Hardening	-	3 ～ 6	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	10	20 ～ 800	f8	No Induction Hardening	-	-	6
-	1 Piece(s)	3 Day(s)	-	[Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	4 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	12	20 ～ 1000	f8	No Induction Hardening	8	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	4 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	13	25 ～ 1000	f8	No Induction Hardening	8	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	4 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	15	25 ～ 1000	f8	No Induction Hardening	8 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	4 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	16	30 ～ 1200	f8	No Induction Hardening	8 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	10	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	4 ～ 12	-
-	1 Piece(s)	3 Day(s)	10	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	20	30 ～ 1200	f8	No Induction Hardening	8 ～ 14	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	-	4 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	-	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	25	35 ～ 1200	f8	No Induction Hardening	8 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	-	6 ～ 20	-
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	00030 / [Steel_] S45C Equivalent	Not Provided	Hard Chrome Plating	30	35 ～ 1500	f8	No Induction Hardening	8 ～ 18	-	-
-	1 Piece(s)	5 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	4	20 ～ 300	g6	Induction Hardened (58HRC~)	-	2	-
-	1 Piece(s)	5 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	5	-	g6	Induction Hardened (58HRC~)	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	6	20 ～ 600	g6	Induction Hardened (58HRC~)	-	3	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	20 ～ 800	g6	Induction Hardened (58HRC~)	-	3 ～ 5	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	20 ～ 800	g6	Induction Hardened (58HRC~)	-	3 ～ 6	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	20 ～ 800	g6	Induction Hardened (58HRC~)	-	-	6
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	4 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	20 ～ 1000	g6	Induction Hardened (58HRC~)	8	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1000	g6	Induction Hardened (58HRC~)	-	4 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	6 ～ 8
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 1000	g6	Induction Hardened (58HRC~)	8	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1000	g6	Induction Hardened (58HRC~)	-	4 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 1000	g6	Induction Hardened (58HRC~)	8 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 1200	g6	Induction Hardened (58HRC~)	-	4 ～ 10	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 1200	g6	Induction Hardened (58HRC~)	-	-	6 ～ 10
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	30 ～ 1200	g6	Induction Hardened (58HRC~)	8 ～ 10	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	-	4 ～ 12	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	-	-	6 ～ 12
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	30 ～ 1200	g6	Induction Hardened (58HRC~)	8 ～ 14	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	-	4 ～ 16	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	-	-	6 ～ 16
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	35 ～ 1200	g6	Induction Hardened (58HRC~)	8 ～ 18	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	-	6 ～ 20	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	6 ～ 20
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	35 ～ 1500	g6	Induction Hardened (58HRC~)	8 ～ 18	-	-
-	1 Piece(s)	5 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	4	20 ～ 300	g6	Induction Hardened (58HRC~)	-	2	-
-	1 Piece(s)	5 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	5	-	g6	Induction Hardened (58HRC~)	-	-	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	6	20 ～ 600	g6	Induction Hardened (58HRC~)	-	3	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	8	20 ～ 800	g6	Induction Hardened (58HRC~)	-	3 ～ 5	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	10	20 ～ 800	g6	Induction Hardened (58HRC~)	-	3 ～ 6	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	10	20 ～ 800	g6	Induction Hardened (58HRC~)	-	-	6
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	12	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	4 ～ 8	-
-	1 Piece(s)	3 Day(s)	-	[Steel_] SUJ2 / [Steel_] SUJ2 Equivalent	Induction Hardened	Not Provided	12	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	6 ～ 8

Example

Product TOP

Basic Information

Basic Shape	Solid	End Shape (Left)	Tapped	End Shape (Right)	No Machining
Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

81 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
TEST(Ø)
4

5

6

8

10

12

13

15

16

20

25

30

50
Clear
Length L(mm)
[20-1500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
Change Tapped Thread M to Fine One [MSC](mm)
8

10

12

14

18
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)
2

3

4

5

6

8

10

12

16

20

24

30
Clear
Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)
6

8

10

12

16

20
Clear
type
- PSFGT
- PSFJT
- PSSFGT
- PSSFJT
- SFJT
- SSFJT
Clear
TEST
- Steel_
  - SUJ2
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel_
  - SUS304
  - SUS440C Equivalent
  - SUS440C or 13Cr stainless
- 00030
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less

5 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI_Test Days to Ship : 3 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI_Test Standard Price : MYR 58.85- Days to Ship : 1 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI_Test Standard Price : MYR 63.56- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI_Test Standard Price : MYR 13.15- Days to Ship : 1 Day(s)

Customers Who Viewed This Item Also Viewed

Linear Shafts-Both Ends Tapped
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Shafts-Straight Type One End Threaded with Undercut
MISUMI_Test

Days to Ship : 3 Day(s) or more
Flanged Linear Bushings - Single, Opposite Counterbored Hole
MISUMI_Test

Standard Price : MYR 21.60-

Days to Ship : 1 Day(s) or more
Metal Washers - T Dimension Configurable, Precision Class
MISUMI_Test

Days to Ship : 1 Day(s) or more
Metal Washers - Thickness +-0.10 & +-0.01 mm/Dimensions Configurable
MISUMI_Test

Days to Ship : 3 Day(s) or more
Metal Washers - Standard / Precision Class
MISUMI_Test

Days to Ship : 1 Day(s) or more
Linear Shafts-One End Tapped with Wrench Flats / Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s) or more
Linear Bushings - Single
MISUMI_Test

Standard Price : MYR 13.15-

Days to Ship : 1 Day(s)
Linear Shafts-Both Ends Tapped with Wrench Flats / Both Ends Tapped with Cross-Drilled Hole
MISUMI_Test

Days to Ship : 3 Day(s) or more
Flanged Linear Bushings - Double, Opposite Counterbored Hole
MISUMI_Test

Standard Price : MYR 45.36-

Days to Ship : 1 Day(s)
Metal Collar - Precision Grade, Dimension Configurable
MISUMI_Test

Days to Ship : 3 Day(s) or more
Hex Posts - One End Threaded One End Tapped
MISUMI_Test

Days to Ship : 3 Day(s)

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Shafts-One End Tapped

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Heat Treatment

Surface Treatment

TEST(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

Change Tapped Thread M to Fine One [MSC](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 2) [M](mm)

Tapped (Coarse, Effective Length: Nominal Dia. x 3) [MD](mm)

type

TEST

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm