(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Support Pins - Stepped - Threaded (Part Numbers)
"Locating Pins with the Height configurable in a wide range. Regardless of Round Shape or Diamond Shape, the horizontal locating and height adjustment are enabled."
Part Number
Configured Part Number is shown.
[ ! ]SUS304 may not be polished and may have no centering hole.
| [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Round | Diamond |
| ①S45C Equivalent | Black Oxide | - | SHPCB | SDPCB |
| ②S45C Equivalent | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SHPCR | - |
| ③S45C Equivalent | Black Oxide | Treated Hardness: 45 ~ 50HRC | SHPCHB | SDPCHB |
| ④S45C | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | - | - |
| ⑤SUS304 | - | - | SHPCSU | SDPCSU |
| ⑥SUS440C equivalent | - | Treated Hardness: 50 ~ 55HRC | SHPCC | SDPCC |
Specifications
| Part Number | - | L | - | P | - | B |
| SDPCSU20 | - | L50.00 | - | P8.00 | - | B3 |
| Part Number | L 0.01mm Increment | P 0.01mm Increment | B Selection | m | d | M (Coarse) | * Tightening Torque N • cm | ℓ1 | W1 | (W) | ℓ2 | Compliance with Standard Threaded | Compliance with Standard Threaded | |||||||||||
| Type | D | ① SHPCB | ② SHPCR | ③ SHPCHB | ④ SHPCHR | ⑤ SHPCSU | ⑥ SHPCC | ① SDPCB | ② SDPCR | ③ SDPCHB | ④ SDPCHR | ⑤ SDPCSU | ⑥ SDPCC | |||||||||||
< Round > SHPCB SHPCR SHPCHB SHPCSU SHPCC < Diamond > SDPCB SDPCHB SDPCSU SDPCC | 6 | 10.00~50.00 | 3.00~4.00 | 2 3 4 5 | 1 | - | M3 | 147 | - | 5 | 1.0 | 8 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● |
| 8 | 3.00~6.00 | 1 | - | M3 | 147 | - | 7 | 1.5 | 8 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● | |||
| 10 | 20.00~80.00 | 2 | 6 | M3 | 147 | 6 | 8 | 1.5 | 8 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● | |||
| 12 | 4.00~8.00 | 2 | 8 | M5 | 676 | 6 | 10 | 1.8 | 10 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● | |||
| 15 | 4.00~10.00 | 3 | 10 | M5 | 676 | 9 | 13 | 2.2 | 10 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● | |||
| 20 | 5.00~10.00 | 3 | 12 | M8 | 2803 | 9 | 17 | 2.5 | 10 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● | |||
| 25 | 8.00~15.00 | 3 | 16 | M10 | 5557 | 10 | 20 | 3 | 10 | ● | ● | ● | - | ● | ● | ● | - | ● | - | ● | ● | |||
* Tightening torque will be within Strength Class of 10.9 as indicated in the Technical Data >> P. 2297 * Not applicable when using locking materials or lock washers.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SDPCC6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SDPCC8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SDPCC25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SDPCHB6-L[10-50/0.01]-P[3-4/0.01]-B[2,3,4,5] |
| SDPCHB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SDPCSU15-L[20-80/0.01]-P[4-10/0.01]-B[2,3,4,5] |
| SDPCSU25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPCB12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPCB25-L[20-80/0.01]-P[8-15/0.01]-B[2,3,4,5] |
| SHPCC12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPCR8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| SHPCR12-L[20-80/0.01]-P[4-8/0.01]-B[2,3,4,5] |
| SHPCSU8-L[10-50/0.01]-P[3-6/0.01]-B[2,3,4,5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Material | Surface Treatment (Ø) | Hardening | Hardness | Outer Dia. D (mm) | B (mm) | L (mm) | P (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 5 Day(s) | 10 | [Stainless Steel] SUS440C Equivalent | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | [Stainless Steel] SUS440C Equivalent | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | [Stainless Steel] SUS440C Equivalent | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | - | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 6 | 2 ～ 5 | 10 ～ 50 | 3 ～ 4 | ||
- | 1 Piece(s) | 5 Day(s) | - | [Steel] S45C Equivalent | Black Oxide | Provided | Treated Hardness: 45 ~ 50HRC | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 15 | 2 ～ 5 | 20 ～ 80 | 4 ～ 10 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | - | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 6 Day(s) or more | - | [Steel] S45C Equivalent | Black Oxide | Not Provided | Not Provided | 25 | 2 ～ 5 | 20 ～ 80 | 8 ～ 15 | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | [Stainless Steel] SUS440C Equivalent | Not Provided | Provided | Treated Hardness: 50 ~ 55HRC | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | - | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 | ||
- | 1 Piece(s) | 4 Day(s) | - | [Steel] S45C Equivalent | Hard Chrome Plating | Provided | Plating Hardness: 750HV | 12 | 2 ～ 5 | 20 ～ 80 | 4 ～ 8 | ||
- | 1 Piece(s) | 5 Day(s) | - | [Stainless Steel] SUS304 | Not Provided | Not Provided | Not Provided | 8 | 2 ～ 5 | 10 ～ 50 | 3 ～ 6 |
Loading...
Example
Basic Information
| Shape | Support Pin | Height Tolerance | 0/+0.05 | Mounting Type | Threaded |
|---|---|---|---|---|---|
| Tip Shape | Tapered |
Specification/Dimensions
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment(Ø)
-
Hardening
- Provided
- Not Provided
-
Hardness
-
Outer Dia. D(mm)
-
B(mm)
-
L(mm)
-
P(mm)
-
type
- SDPCC
- SDPCHB
- SDPCSU
- SHPCB
- SHPCC
- SHPCR
- SHPCSU
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Height Adjusting Pins - Round / Wrench Flats
- Height Adjusting Pins - Counterbored
- Height Adjusting Pins - Height Adjusting Pins
- Support Pins - Stepped - Tapped
- Support Pins - Stepped, Configurable, Straight - Threaded
- Support Pins - Tip Shape Selectable
- Hex Support Pins - Stepped
- Hex Support Pins - Stepped -Tapped
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI_Test Days to Ship : 4 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
Support Pins - Stepped, Configurable, Straight - ThreadedMISUMI_Test
Days to Ship : 5 Day(s) or more
-
-
-
-
-
-
-
Support Pins - Stepped, Configurable, Straight - Press FitMISUMI_Test
Days to Ship : 5 Day(s) or more
-
Support Pins - Stepped, Configurable, Shouldered - Press FitMISUMI_Test
Days to Ship : 5 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy