(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Outer-Diameter Turning - Shank Tool Bit For Negative Inserts, CoroTurn RC Double Clamp, DDJNR/L (Part Numbers)
[Features]
A high-rigidity double clamp holder for turning.
Extremely easy to handle. Swap out inserts and shims using just the one wrench.
Inserts are easy to swap out, even from the backside of the holder.
A wide variety of insert types can be mounted by swapping out the clamp set and shims.
Supports outer-diameter turning (bore-cutting) and the use of negative inserts.
Supports everything from roughing through to finishing.
Basic Information
| Applicable Tip Shape | D (55° Diamond-Shape) | Application | Outer Diameter / Profiling / Chamfer | Clamp Shape | Cable clamp |
|---|---|---|---|---|---|
| Selfishly | Left-hand | Applicable Tip Clearance Angle Type | Negative | Shank height(mm) | 20 |
| Shank width(mm) | 20 | Rake angle(°) | -6 | Blade Inclination Angle(°) | -7 |
| Lead Angle(°) | -17.5 | Cutting Angle(°) | 107.5 | Clearance angle(°) | 0 |
| Function Width(mm) | 25 | Function Height(mm) | 20 | Function Length(mm) | 125 |
| Dimension L3(mm) | 39.4 | Tip Size | 15 | Gauge Chip | DNMG 15 06 08 |
| Torque(Nm) | 3.9 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- DDJN Type (Outer Diameter Machining / Profiling)
- CRSN Type (Outer Diameter Machining / End Machining)
- KTKF Type/KTKF Type Space Holder
- SVJB Type (outer diameter, profile machining)
- SVPB Type (outer diameter, end surface, profile, relief machining)
- T-Max S Shank Tool Bit For Turning, CSDPR/L
- Outer Diameter Turning - Tool Bit For Negative Inserts, Shank Tool Bit, CoroTurn RC Double Clamp, DCLNR/L
- Outer-Diameter Turning - Shank Tool Bit For Small Lathes, Short Tool Bit For QS Holding System, QS- SVJCR/L
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy