(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Reamers（work material：Aluminum）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
MISUMI_Test
Hand reamer that can be selected in 0.01 mm increments
- Volume Discount
Standard Price: MYR 103.65- Days to Ship: 1 Day(s) or more -
EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.Standard Price: MYR 377.34 Days to Ship: 3 Day(s) or more -
FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.Standard Price: MYR 298.12- Days to Ship: 3 Day(s) or more -
Cobalt High-Speed Steel Spiral Reamer
MISUMI_Test
Reamers with high versatility are available at affordable prices
- Volume Discount
Standard Price: MYR 98.42- Days to Ship: 2 Day(s) or more -
Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Standard Price: MYR 334.33- Days to Ship: 3 Day(s) or more -
FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique at +0.005/0(J5).Standard Price: MYR 223.37 Days to Ship: 3 Day(s) or more -
High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation
MISUMI_Test
For the smooth guidance, it is given the tooth gradient of 1°.
- Volume Discount
Standard Price: MYR 142.37- Days to Ship: 4 Day(s) or more -
MISUMI_Test
A Morse taper shank.
- Volume Discount
Standard Price: MYR 392.49- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 1,230.14- Days to Ship: 3 Day(s) or more -
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Standard Price: MYR 498.51 Days to Ship: 3 Day(s) or more -
Coated Solid Spiral Reamer CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.
[Features]
· Features TiCN coating that prevents welding and improves roughness of the finishing surface.
· Uses a twisted blade with excellent chip discharge performance.
[Applications]
· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.Standard Price: MYR 443.57- Days to Ship: 3 Day(s) or more -
HRM Hand Reamer (Hundredths Range)
OKAZAKI SEIKO
Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
Standard Price: MYR 151.63- Days to Ship: 5 Day(s) or more -
Days to Ship: Quote -
EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.Standard Price: MYR 247.60 Days to Ship: 4 Day(s) or more -
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI_Test
The high-hardness steel machining type is also available
- Volume Discount
Standard Price: MYR 326.10 Days to Ship: 2 Day(s) or more -
MISUMI_Test
The high helix reduces the cutting resistance.
- Volume Discount
Standard Price: MYR 186.51- Days to Ship: 4 Day(s) or more -
High-Speed Steel Spiral Hand Reamer
MISUMI_Test
Frequently used standard sizes are offered at affordable prices
Standard Price: MYR 101.90 Days to Ship: 1 Day(s) or more -
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.Standard Price: MYR 413.58 Days to Ship: 3 Day(s) or more -
EIKOSHA
A spiral machine reamer.
[Features]
· Morse taper shank is adopted for machine use.
· Adopts a torsion blade with excellent cutting powder discharge.
[Applications]
· For general purpose finishing.Standard Price: MYR 727.75- Days to Ship: 3 Day(s) or more -
Reamer with End Blades ERR-TiN
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiN coating is added to powdered HSS for a long service life.Standard Price: MYR 726.09 Days to Ship: 3 Day(s) or more -
Carbide High Helical Reamer CHHR
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.Standard Price: MYR 537.54 Days to Ship: 4 Day(s) or more -
Spiral Reamer with Carbide Bottom Blade
MISUMI_Test
Spiral reamer bottom flute type for high-speed cutting
- Volume Discount
Standard Price: MYR 458.84 Days to Ship: 2 Day(s) or more -
High-Speed Steel Spiral Machine Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation
MISUMI_Test
Morse taper shank with the single angle of 45°.
- Volume Discount
Standard Price: MYR 384.69- Days to Ship: 4 Day(s) or more -
MISUMI_Test
The high helix reduces the cutting resistance.
- Volume Discount
Standard Price: MYR 157.09 Days to Ship: 4 Day(s) or more -
MISUMI_Test
The high helix reduces the cutting resistance.
- Volume Discount
Standard Price: MYR 473.79- Days to Ship: 3 Day(s) or more -
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
Standard Price: MYR 494.02 Days to Ship: 3 Day(s) or more -
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Standard Price: MYR 652.60 Days to Ship: 3 Day(s) or more -
Standard Price: MYR 149.98 Days to Ship: 1 Day(s) -
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.Standard Price: MYR 238.70- Days to Ship: Quote -
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.Standard Price: MYR 246.97 Days to Ship: 3 Day(s) or more -
FPTOOLS
The DLC coating achieves outstanding wear resistance and resistance to weld adhesion. Particularly excellent in machining aluminum or copper.
Standard Price: MYR 412.91- Days to Ship: 4 Day(s) or more -
FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique to the manufacturer at +0.005/0(J5).Standard Price: MYR 230.09- Days to Ship: Quote -
FPTOOLS
Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
Standard Price: MYR 618.00 Days to Ship: Quote -
EIKOSHA
High-speed steel high-torsion spiral reamer.
[Features]
· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.
· Reduces cutting resistance.
[Applications]
· Convenient for general purpose finishing.Standard Price: MYR 185.52- Days to Ship: 3 Day(s) or more -
MIERASEN
[Features]
· Has Morse taper shank with 45° bite and long burnished blade. Widely used for machine applications.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.Standard Price: MYR 473.85 Days to Ship: 3 Day(s) or more -
TRUSCO
[Features]
· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.
· Originally intended for hand finishing, but can also be used for final finishing using machines.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.Standard Price: MYR 154.27 Days to Ship: 1 Day(s) -
Tough cut skill reamer (morse taper shank)
NIKKENKOSAKU
Supports work materials such as hard-to-cut materials, die steel, tempered steel and more
Standard Price: MYR 3,288.51- Days to Ship: 3 Day(s) or more -
NIKKENKOSAKU
Excellent for machining non-ferrous materials and cast iron
Standard Price: MYR 1,019.18 Days to Ship: 3 Day(s) or more -
Carbide Broach Reamer (Morse Taper Shank)
NIKKENKOSAKU
Broach reamer for machining aluminum or cast iron. Maintains clean surface roughness
Standard Price: MYR 855.94 Days to Ship: 3 Day(s) or more -
Standard Price: MYR 1,635.06 Days to Ship: 3 Day(s) or more -
Tough Cut Skill Reamer for Bottom Hollow Applications (Straight Shank)
NIKKENKOSAKU
Ideal for finishing bearings, etc. with bottom hole reamer.
Standard Price: MYR 950.73 Days to Ship: 3 Day(s) or more -
Days to Ship: Quote -
Days to Ship: Quote -
Days to Ship: Quote -
Days to Ship: Quote
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Diameter(mm) |
| Shank Type |
| work material |
| Groove Length(mm) |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| Both square |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
| Brand | MISUMI_Test | EIKOSHA | FPTOOLS | MISUMI_Test | EIKOSHA | FPTOOLS | MISUMI_Test | MISUMI_Test | OSG | EIKOSHA | EIKOSHA | OKAZAKI SEIKO | OMIKOGYO | EIKOSHA | MISUMI_Test | MISUMI_Test | MISUMI_Test | FPTOOLS | EIKOSHA | EIKOSHA | EIKOSHA | MISUMI_Test | MISUMI_Test | MISUMI_Test | MISUMI_Test | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | EIKOSHA | MIERASEN | TRUSCO | NIKKENKOSAKU | NIKKENKOSAKU | NIKKENKOSAKU | NIKKENKOSAKU | NIKKENKOSAKU | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO |
| Product Series | High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model | High-Speed Steel Spiral Hand Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | High-Speed Steel Spiral Machine Reamer, Right Blade with 12°Left Spiral, 0.01 mm Unit Designation | Tough Cut Skill Reamer for Bottom Hollow Applications (Straight Shank) | ||||||||||||||||||||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | Quote | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) | Quote | 3 Day(s) or more | 4 Day(s) or more | Quote | Quote | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | Quote | Quote | Quote | Quote |
| Tool Diameter(mm) | 2.09 ～ 21.9 | 13.75 | 3.355 ～ 5.635 | 3 ～ 7 | 2.8 ～ 23 | 11.2 | 2.4 ～ 15 | 5.9 ～ 20.04 | 9.72 ～ 13.03 | 6.5 | 4.79 ～ 6.03 | 2.17 ～ 3.19 | 11.7 ～ 20.7 | 4.1 | 6 | 2.21 ～ 12.21 | 4 ～ 5 | 0.602 | 17.03 ～ 23 | 11.01 | 2 | 3.005 | 6 ～ 22.03 | 4.4 | 14.1 ～ 19.2 | 2.35 | 8.95 | - | 7.655 ～ 13.725 | 1.015 | 3.015 ～ 8.465 | 7.265 ～ 17.505 | 16.41 | 2.89 ～ 10.7 | 8 | 2 | 47.5 ～ 53 | 3.6 | 7.6 | 3.3 | 10.2 | 4.1 ～ 19.7 | 5 ～ 13.99 | 19.03 | 6 ～ 15.98 |
| Shank Type | straight shank | straight shank | End Mill Shank | End Mill Shank | straight shank | straight shank | straight shank | Taper shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | End Mill Shank | straight shank | End Mill Shank | straight shank | straight shank | End Mill Shank | Taper shank | End Mill Shank | straight shank | End Mill Shank | Taper shank | straight shank | Taper shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | straight shank | Taper shank | straight shank | Taper shank | straight shank | - | - | - | - | - | End Mill Shank | End Mill Shank | End Mill Shank | End Mill Shank |
| work material | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] | Aluminum[◎] | Aluminum[○] | Aluminum[○] | Aluminum[○] | Aluminum[◎] | Aluminum[◎] |
| Groove Length(mm) | 30 ～ 120 | 85 | 27 ～ 30 | 25 ～ 31 | 30 ～ 65 | 75 | 35 ～ 90 | 50 ～ 110 | - | 35 | 35 | 30 ～ 40 | 80 ～ 120 | 30 | 30 | 13 ～ 45 | 38 ～ 44 | 6 | 100 ～ 130 | 30 | 10 | 20 | 50 ～ 120 | 25 | 46 ～ 55 | 20 | 40 | 87 | 60 ～ 85 | 20 | 40 ～ 60 | 55 ～ 105 | 45 | 15 ～ 40 | - | - | - | - | - | - | - | - | 38 ～ 85 | - | 35 ～ 80 |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | Available | NA | Available | NA | NA | NA | NA | Available | NA | NA | NA | NA | NA | Available | NA | NA | Available | Available | Available | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | Available | NA | NA |
| Groove Shape | Straight | Straight | Straight | Spiral | Straight | Straight | Spiral | Straight | Straight | Straight | Spiral | Straight | Spiral | Straight | Straight | Spiral | Spiral | Straight | Spiral | Spiral | Helical | Spiral | Spiral | Spiral | Spiral | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral | Spiral | Helical | Straight | Straight | - | - | - | - | - | Spiral | Spiral | Straight | Straight |
| Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | Available | NA | Available | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - | - | - | - | - | NA | NA | NA | NA |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6.64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Diameter(mm)
- 0.602
- 1.015
- 1.32
- 1.35
- 2
- 2.01
- 2.09
- 2.17
- 2.21
- 2.31
- 2.35
- 2.4
- 2.54
- 2.8
- 2.89
- 3
- 3.005
- 3.015
- 3.19
- 3.26
- 3.3
- 3.355
- 3.51
- 3.52
- 3.6
- 3.63
- 3.77
- 4
- 4.1
- 4.4
- 4.5
- 4.79
- 5
- 5.325
- 5.49
- 5.5
- 5.53
- 5.635
- 5.71
- 5.8
- 5.9
- 5.91
- 5.94
- 5.98
- 6
- 6.01
- 6.03
- 6.04
- 6.08
- 6.3
- 6.4
- 6.5
- 6.8
- 7
- 7.2
- 7.265
- 7.34
- 7.5
- 7.6
- 7.655
- 7.99
- 8
- 8.1
- 8.45
- 8.465
- 8.95
- 8.98
- 9.3
- 9.45
- 9.6
- 9.72
- 9.75
- 9.9
- 10
- 10.1
- 10.2
- 10.7
- 11.01
- 11.06
- 11.11
- 11.2
- 11.31
- 11.6
- 11.7
- 12.2
- 12.21
- 12.3
- 12.41
- 12.5
- 12.53
- 12.7
- 13.03
- 13.725
- 13.75
- 13.8
- 13.99
- 14
- 14.1
- 14.6
- 14.98
- 15
- 15.09
- 15.98
- 16
- 16.1
- 16.2
- 16.41
- 17
- 17.03
- 17.505
- 17.8
- 18.2
- 18.3
- 18.98
- 19.03
- 19.2
- 19.4
- 19.7
- 19.98
- 20.01
- 20.04
- 20.4
- 20.7
- 21.9
- 22
- 22.03
- 23
- 24
- 27
- 27.03
- 28
- 47.5
- 53
-
Shank Type
- End Mill Shank
- straight shank
- Taper shank
- Morse Taper Shank
-
work material
-
Groove Length(mm)
-
Coating Y/N
-
Groove Shape
-
Base Blade Y/N
-
Tip diameter
-
Large End Diameter
-
Both square
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Reamers
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Core Drills (Tip Tools)
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy