(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Reamers（Groove Shape：Straight）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model
MISUMI_Test
Hand reamer that can be selected in 0.01 mm increments
- Volume Discount
Standard Price: MYR 103.65- Days to Ship: 1 Day(s) or more -
EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.Standard Price: MYR 377.34 Days to Ship: 3 Day(s) or more -
FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.Standard Price: MYR 298.12- Days to Ship: 3 Day(s) or more -
Straight Shank Chucking Reamer SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Standard Price: MYR 334.33- Days to Ship: 3 Day(s) or more -
FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique at +0.005/0(J5).Standard Price: MYR 223.37 Days to Ship: 3 Day(s) or more -
MISUMI_Test
A Morse taper shank.
- Volume Discount
Standard Price: MYR 392.49- Days to Ship: 4 Day(s) or more -
Standard Price: MYR 1,230.14- Days to Ship: 3 Day(s) or more -
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Standard Price: MYR 498.51 Days to Ship: 3 Day(s) or more -
HRM Hand Reamer (Hundredths Range)
OKAZAKI SEIKO
Cast iron and general steel hole finishing. Uses MCo material (cobalt high speed steel).
Standard Price: MYR 151.63- Days to Ship: 5 Day(s) or more -
EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.Standard Price: MYR 247.60 Days to Ship: 4 Day(s) or more -
Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining
MISUMI_Test
The high-hardness steel machining type is also available
- Volume Discount
Standard Price: MYR 326.10 Days to Ship: 2 Day(s) or more -
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.Standard Price: MYR 413.58 Days to Ship: 3 Day(s) or more -
TAIYO-TOOL
[Shank Type]
· Morse taper shank
[Coating Y/N]
· None
[Groove Shape]
· Straight
[Base Blade Y/N] NStandard Price: MYR 333.90 Days to Ship: 3 Day(s) or more -
DLC Carbide Solid Reamer for Aluminum CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
Standard Price: MYR 494.02 Days to Ship: 3 Day(s) or more -
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Standard Price: MYR 652.60 Days to Ship: 3 Day(s) or more -
Standard Price: MYR 149.98 Days to Ship: 1 Day(s) -
F.P. Gold Reamer Straight Blade
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.Standard Price: MYR 238.70- Days to Ship: Quote -
FPTOOLS
The DLC coating achieves outstanding wear resistance and resistance to weld adhesion. Particularly excellent in machining aluminum or copper.
Standard Price: MYR 412.91- Days to Ship: 4 Day(s) or more -
MIERASEN
[Features]
· Has Morse taper shank with 45° bite and long burnished blade. Widely used for machine applications.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.Standard Price: MYR 473.85 Days to Ship: 3 Day(s) or more -
TRUSCO
[Features]
· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.
· Originally intended for hand finishing, but can also be used for final finishing using machines.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.Standard Price: MYR 154.27 Days to Ship: 1 Day(s) -
Days to Ship: Quote -
Days to Ship: Quote -
Days to Ship: Quote -
Days to Ship: 3 Day(s) or more -
Standard Price: MYR 359.06- Days to Ship: 6 Day(s) or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Tool Diameter(mm) |
| Shank Type |
| work material |
| Groove Length(mm) |
| Coating Y/N |
| Groove Shape |
| Base Blade Y/N |
| Tip diameter |
| Large End Diameter |
| Both square |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Brand | MISUMI_Test | EIKOSHA | FPTOOLS | EIKOSHA | FPTOOLS | MISUMI_Test | OSG | EIKOSHA | OKAZAKI SEIKO | EIKOSHA | MISUMI_Test | FPTOOLS | TAIYO-TOOL | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | MIERASEN | TRUSCO | OMIKOGYO | OMIKOGYO | OMIKOGYO | OMIKOGYO | DAIICHITOOL |
| Product Series | High-Speed Steel Hand Reamer, Straight Right Blade, 0.01 mm Unit Designation Model | Carbide Straight Reamer, Non-Coated / TS Coat for High-Hardness Steel Machining | |||||||||||||||||||||||
| Days to Ship | 1 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 5 Day(s) or more | 4 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 1 Day(s) | Quote | 4 Day(s) or more | 3 Day(s) or more | 1 Day(s) | Quote | Quote | Quote | 3 Day(s) or more | 6 Day(s) or more |
| Tool Diameter(mm) | 2.09 ～ 21.9 | 13.75 | 3.355 ～ 5.635 | 2.8 ～ 23 | 11.2 | 5.9 ～ 20.04 | 9.72 ～ 13.03 | 6.5 | 2.17 ～ 3.19 | 4.1 | 6 | 0.602 | 7.2 | 2.35 | 8.95 | - | 7.655 ～ 13.725 | 3.015 ～ 8.465 | 8 | 2 | 19.03 | 6 ～ 15.98 | 13.99 ～ 18.98 | 5.8 ～ 17 | 2.01 ～ 5.5 |
| Shank Type | straight shank | straight shank | End Mill Shank | straight shank | straight shank | Taper shank | End Mill Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | Morse Taper Shank | End Mill Shank | straight shank | straight shank | End Mill Shank | End Mill Shank | Taper shank | straight shank | End Mill Shank | End Mill Shank | End Mill Shank | Morse Taper Shank | straight shank |
| work material | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-resistant alloy[○] / Alloy Steel[◎] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Quenched and tempered steel[◎] / high hardness steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | - | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | general steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | general steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | Aluminum[◎] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] |
| Groove Length(mm) | 30 ～ 120 | 85 | 27 ～ 30 | 30 ～ 65 | 75 | 50 ～ 110 | - | 35 | 30 ～ 40 | 30 | 30 | 6 | 55 | 20 | 40 | 87 | 60 ～ 85 | 40 ～ 60 | - | - | - | 35 ～ 80 | 115 ～ 125 | 50 ～ 80 | 60 ～ 100 |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | Available | NA | NA | Available | NA | NA | Available | NA | NA | Available | Available | NA | NA | NA | NA | NA | NA | - |
| Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
| Base Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | - |
| Tip diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - |
| Large End Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6.64 | - | - | - | - | - | - | - | - | - |
| Both square | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/50 | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Tool Diameter(mm)
- 0.602
- 1.015
- 1.32
- 1.35
- 2
- 2.01
- 2.09
- 2.17
- 2.21
- 2.31
- 2.35
- 2.4
- 2.54
- 2.8
- 2.89
- 3
- 3.005
- 3.015
- 3.19
- 3.26
- 3.3
- 3.355
- 3.51
- 3.52
- 3.6
- 3.63
- 3.77
- 4
- 4.1
- 4.4
- 4.5
- 4.79
- 5
- 5.325
- 5.49
- 5.5
- 5.53
- 5.635
- 5.71
- 5.8
- 5.9
- 5.91
- 5.94
- 5.98
- 6
- 6.01
- 6.03
- 6.04
- 6.08
- 6.3
- 6.4
- 6.5
- 6.8
- 7
- 7.2
- 7.265
- 7.34
- 7.5
- 7.6
- 7.655
- 7.99
- 8
- 8.1
- 8.45
- 8.465
- 8.95
- 8.98
- 9.3
- 9.45
- 9.6
- 9.72
- 9.75
- 9.9
- 10
- 10.1
- 10.2
- 10.7
- 11.01
- 11.06
- 11.11
- 11.2
- 11.31
- 11.6
- 11.7
- 12.2
- 12.21
- 12.3
- 12.41
- 12.5
- 12.53
- 12.7
- 13.03
- 13.725
- 13.75
- 13.8
- 13.99
- 14
- 14.1
- 14.6
- 14.98
- 15
- 15.09
- 15.98
- 16
- 16.1
- 16.2
- 16.41
- 17
- 17.03
- 17.505
- 17.8
- 18.2
- 18.3
- 18.98
- 19.03
- 19.2
- 19.4
- 19.7
- 19.98
- 20.01
- 20.04
- 20.4
- 20.7
- 21.9
- 22
- 22.03
- 23
- 24
- 27
- 27.03
- 28
- 47.5
- 53
-
Shank Type
- End Mill Shank
- straight shank
- Taper shank
- Morse Taper Shank
-
work material
-
Groove Length(mm)
-
Coating Y/N
-
Groove Shape
-
Base Blade Y/N
-
Tip diameter
-
Large End Diameter
-
Both square
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Reamers
-
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Core Drills (Tip Tools)
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy