(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
THK Cam Followers, Roller Followers Testtesttest
Product Category
-
-
-
Bracket for Cam Follower -
Roller Follower Pin
-
Hex Socket Head Cam Follower CF-A Model
THK
[Caution]
* stud diameters of 12 mm or more have been discontinued. The substitute product is the CF-AB model.
For inquiries, please contact our cam follower representatives.Days to Ship: 1 Day(s) or more -
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.Standard Price: MYR 88.03- Days to Ship: 1 Day(s) or more -
THK
Cam follower with an extremely fine needle roller.
[Features]
· Easy to use in limited spaces due to the small outer diameterStandard Price: MYR 71.15- Days to Ship: 1 Day(s) or more -
THK
NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.
Standard Price: MYR 34.38- Days to Ship: 1 Day(s) or more -
Roller FollowerSpherical Outer RingNo Separation TypeNART Type
THK
Non-isolation bearing with internally attached side plates.
Standard Price: MYR 47.76- Days to Ship: 1 Day(s) or more -
THK
Widely used cam follower with a driver groove on the stud head.
Days to Ship: 1 Day(s) or more -
THK
A cam follower where precision adjustment of the position is easily performed by turning the stud,
as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.Days to Ship: 1 Day(s) or more -
THK
Cam follower with stud head and screw section normally used for tap pipe processing.
Standard Price: MYR 61.71- Days to Ship: 1 Day(s) or more -
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CFH-AB A cam follower where precision adjustment of the position is easily performed by turning the stud, as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm. This allows significant reductions in processing and assembly man-hours by avoiding alignment with the cam groove and precise machining of the mounting hole position.
· CFH-AB model…… grease nipple / hex socket head Corresponds to 12 - 30 [mm] studStandard Price: MYR 110.80- Days to Ship: 1 Day(s) or more -
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· The CFN-R-A model is a cam follower incorporating an internal thrust ball. It has the effect of preventing wear and friction on the sliding surface when a thrust load is applied due to mounting error.Standard Price: MYR 153.02- Days to Ship: 2 Day(s) or more -
THK
Isolation bearing combining a thick inner inner ring and precision cage with needle roller.
Standard Price: MYR 31.52- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 25.12- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 43.98- Days to Ship: 1 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Roller Outer Dia. D(Ø) |
| Product Category |
| Roller Width B(mm) |
| Roller Type |
| Tightening Method |
| Cam Follower Stud Screw (Coarse)(mm) |
| Roller Follower Inner Dia. D(mm) |
| Cam Follower Type |
| Material |
| Size Standards |
| Roller Follower Type |
| Roller Lining |
| Shaft |
| Roller Guiding Method |
| Inner Ring |
| Cam Follower: Stud Screw (Fine Thread)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | Roller FollowerSpherical Outer RingNo Separation TypeNART Type | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more |
| Roller Outer Dia. D(Ø) | 10 ～ 85 | 30 ～ 85 | 5 ～ 12 | 19 ～ 90 | 16 ～ 90 | 13 ～ 85 | 16 ～ 90 | 16 ～ 90 | 30 ～ 90 | 13 ～ 22 | 19 ～ 90 | 16 ～ 90 | 16 ～ 52 |
| Product Category | Cam Follower | Cam Follower | Cam Follower | Roller Follower | Roller Follower | Cam Follower | Cam Follower | Cam Follower | Cam Follower | Cam Follower | Roller Follower | Roller Follower | Cam Follower |
| Roller Width B(mm) | 7 ～ 35 | 14 ～ 35 | 3 ～ 7 | 13.8 ～ 25.8 | 11 ～ 32 | 9 ～ 35 | 11 ～ 35 | 11 ～ 35 | 14 ～ 35 | 9 ～ 12 | 9.8 ～ 19.8 | 7.8 ～ 19.8 | 11 ～ 24 |
| Roller Type | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring |
| Tightening Method | Hex Socket on Head | Hex Socket on Head Thread | Hex Socket on Head / Hex Socket on Head Thread | - | - | Straight Slot | Hex Socket on Head / Hex Socket on Head Thread / Straight Slot | Straight Slot | Hex Socket on Head Thread | Hex Socket on Head | - | - | Hex Socket on Head |
| Cam Follower Stud Screw (Coarse)(mm) | M3 ～ M30 | M12 ～ M30 | M2.5 ～ M6 | - | - | M5 ～ M30 | M6 ～ M30 | M6 ～ M30 | M12 ～ M30 | M5 ～ M10 | - | - | M6 ～ M20 |
| Roller Follower Inner Dia. D(mm) | - | - | - | 6 ～ 50 | 5 ～ 50 | - | - | - | - | - | 6 ～ 50 | 7 ～ 60 | - |
| Cam Follower Type | Standard | Standard | Standard | - | - | Standard | Eccentricity | Standard | Eccentricity | Standard | - | - | Standard |
| Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel |
| Size Standards | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System | Metric System |
| Roller Follower Type | - | - | - | Separate | Solid | - | - | - | - | - | Separate | Separate | - |
| Roller Lining | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Shaft | Provided | Provided | Provided | Not Provided | Not Provided | Provided | Provided | Provided | Provided | Provided | Not Provided | Not Provided | Provided |
| Roller Guiding Method | With Retainer / Full Rollers | With Retainer / Full Rollers | With Retainer / Full Rollers | With Retainer | With Retainer / Full Rollers | With Retainer | With Retainer | With Retainer | With Retainer / Full Rollers | With Retainer | With Retainer | With Retainer | With Retainer |
| Inner Ring | - | - | Provided | Provided | Provided | - | - | - | - | - | Provided | Not Provided | Provided |
| Cam Follower: Stud Screw (Fine Thread)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Roller Outer Dia. D(Ø)
-
Roller Width B(mm)
-
Roller Type
-
Tightening Method
-
Cam Follower Stud Screw (Coarse)(mm)
- M1.4×0.3
- M2×0.4
- M2.5
- M2.5×0.45
- M3
- M3 x 0.5
- M3×0.5
- M4
- M4 x 0.7
- M4×0.7
- M5
- M5 x 0.8
- M5×0.8
- M6
- M6 x 1.0
- M6×1
- 7/16-20UNF
- 8
- M8
- M8 x 1.25
- M8×1.25
- M10
- M10x1.0
- M10 x 1.25
- M10×1.25
- 12
- M12
- M12 x 1.5
- M12×1.5
- 16
- M16
- M16 x 1.5
- 18
- M18
- M18 x 1.5
- M18X1.5
- M18×1.5
- 20
- M20
- M20 x 1.5
- M20X1.5
- M20×1.5
- M24
- M24×1.5
- M30
- M30×1.5
- M36X1.5
- M42X1.5
- M52
-
Roller Follower Inner Dia. D(mm)
-
Cam Follower Type
- Standard
- Eccentricity
- Tapped Hole for Mounting Type for Grease Nipple
-
Material
-
Size Standards
- Metric System
- Inch System
-
Roller Follower Type
-
Roller Lining
- Not Provided
- Plastic
- Urethane
-
Shaft
-
Roller Guiding Method
-
Inner Ring
-
Cam Follower: Stud Screw (Fine Thread)(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 9 Day(s) or Less
- 12 Day(s) or Less
Related Categories to Cam Followers, Roller Followers Testtesttest
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy