V Belt Pulleys, Idlers

• 

  Isomek SP Pulley

  NBK

  V pulley to international standards. Either general purpose V-belt, or narrow width V-belt can be used.
  
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · The cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Can be attached and removed from shaft / positioned with hex or socket wrench. In addition, due to the taper fit tightening effect, tightening force is equivalent to shrink fit. Safe and reliable transmission is achieved.

  CAD ：

  2D / 3D

  Standard Price:	MYR 637.51-
  Days to Ship:	Quote

  "Same Day Ship Out" is available for item with 1 day

• 

  Wedge Pulley

  NBK

  High-speed, high power transmission V-belt pulley that conforms with JIS B 1855.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Enables high speed and high power transmission to make it possible to design a system with a smaller pulley diameter, shorter shaft distance and fewer belts.
  · Full lineup. 491 size. 3V: 153 size, 5V: 257 size, 8V: 81 size.
  · 230 size has been added into JIS standard 261 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JIS B 1855-1991, "Slim V-pulley").
  · Imbalance tolerance on the outer circumference guaranteed to be 0.1% of pulley mass.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	MYR 718.43-
  Days to Ship:	Quote

  "Same Day Ship Out" is available for item with 1 day

• 

  NS standard V pulley A

  KANEMITSU

  Nominal diameter 2 to 24 inches, with 1 to 4 runners available in wide selection, with dimensional precision to JIS reference standards, and good balance measurements, and directly usable high speed rotator.
  
  [Features]
  · A wide range of model configurations: 95 A type, 132 B types and 102 C types, with pitches ranging from 2° to 30° and 1 to 6 grooves.
  · High-performance, high-quality NS pulley is the safest and easiest to handle, due to uniform material and strong wall thickness.
  · Dimensional precision to JIS reference standards, with thorough quality control.
  · Groove part shape and dimensions table.
  · Maximum speed: NS standard V-pulley is recommended to be of circumferential speed under 25 m/s specification.
  · Recommended minimum pulley diameter: A type 3° or greater, B type 5° or greater, and C type 8° or greater.

  Standard Price:	MYR 105.80-
  Days to Ship:	1 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  JIS V-Pulley, B Type

  NBK

  Full lineup of V-belt pulleys that conform to JIS B 1854.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway and push screw machining standardized.
  · Extensive product range. 650 size. A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately. Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
  [Applications]
  · Fans, etc.

  Days to Ship:	5 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  JIS V-Pulley, C Type

  NBK

  Top-quality pulley, with materials, machining precision and balance accuracy exceeding JIS standards.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Shaft hole, keyway and push screw machining standardized.
  · A: 146 size, B: 218 size, C: 212 size, D: 74 size.
  · 369 size has been added into JIS standard 281 size separately.
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Imbalance tolerance on outer circumference is 0.1% of pulley mass.
  · Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
  [Applications]
  · Fans, etc.

  CAD ：

  2D / 3D

  Standard Price:	MYR 2,390.49
  Days to Ship:	Quote

  "Same Day Ship Out" is available for item with 1 day

• 

  SNS JIS V Pulley A

  KANEMITSU

  Nominal diameter ø67 to 710, with 1 to 3 runners available in wide selection, good balance measurements, and directly usable on high speed rotator.
  
  [Features]
  · SNS JIS V pulley is a new addition to the mechanical series, with 360 types standardized, rotation ratio, distance between shafts etc. can be freely selected.
  · Ingenuity has been applied to the shape design etc. to prevent damage to the shaft or bearing.
  · Shaft etc. can be preserved, useful for saving labor.
  · Can also be used for machines with heavy loads and shocks etc.
  · High-precision machining, for good transmission efficiency, and regular rotation ration is achieved.
  · As the SNS and JIS V-pulleys, on all balancing machine products, machine using aligned balance measurements, they have good quality high-precision and are directly usable on high-speed rotators.

  Standard Price:	MYR 156.31
  Days to Ship:	6 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  JIS V-Pulley, D Type

  NBK

  Full lineup of V-belt pulleys that conform to JIS B 1854.
  [Features]
  · Consistent production from casting to machining and surface treatment.
  · Shaft hole, keyway and push screw machining standardized.
  · Cell production method allows the production of many kinds of products in low volume, with short lead times.
  · Fine standardization of small-diameter sizes used particularly in drive side mechanisms.
  · Top-quality pulley with materials, machining precision and balance accuracy exceeding JIS standards (JISB1854-1987, "General use V-pulley").
  · Imbalance tolerance on outer circumference is 0.1% of pulley mass.
  · Surface treatment uses electrodeposition coating for improved rust resistance and a beautiful finish.
  [Applications]
  · Fans, etc.

  Days to Ship:	5 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

• 

  Engineering plastic V Pulley Idlers (VIP)

  IMAO CORPORATION

  [Features]
  · Adaptive V-belt M type, A type, B type resin pulley idler.
  · Integrated ball bearing

  CAD ：

  2D / 3D

  Standard Price:	MYR 72.51
  Days to Ship:	1 Day(s)

  "Same Day Ship Out" is available for item with 1 day

• 

  SNS JIS V pulley B

  KANEMITSU

  Nominal diameter ø118 to 900, with 1 to 5 runners available in wide selection, good balance measurements, and directly usable on high-speed rotator.

  Standard Price:	MYR 395.85
  Days to Ship:	5 Day(s) or more

  "Same Day Ship Out" is available for item with 1 day

Loading...