(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 9:00 19/4/2026 to 7:00 (MYT) 20/4/2026. We apologize for the inconvenience.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Round Wire Springs
Round wire springs are parts that use the properties of springs for objectives such as supporting a load or supplementing an internal movement in machinery. Round wire spring models should be selected by considering factors such as the coil inner diameter, outer diameter, free height, allowable load and spring constant. In general, most coils with thick wire diameters have ground ends to prevent them from scratching the inside of machinery, while some coils with thin wire diameters don't have ground ends. Round wire springs are made of several different materials. Examples include stainless steel wire (with high corrosion resistance and ample hardness), piano wire (among the harder types of steel wire), oil tempered wire (with superior fatigue resistance) and Inconel (with high heat and corrosion resistance).
| Days to Ship |
|
|---|
-
Standard Price: MYR 5.50- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 5.50- Days to Ship: 1 Day(s) or more -
UltraSpring Compression Coil Springs
ACCURATE
UltraSpring control loading at two-points: Load @ Standard Height and Load @ Allowable Height (= height @ compressed length). Therefore, UltraSpring maintain their load characteristics closer to their calculated life based on these general allowable maximum deflections.
[Accurate Quality Control]
All UltraSpring products manufactured by Accurate Inc. have lot numbers and full traceability.Standard Price: MYR 3.99- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 6.60- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 9.90- Days to Ship: 1 Day(s) or more -
Days to Ship: 4 Day(s) or more -
Round Coil Springs - Fmax. (Allowable Deflection) =Lx25% - 30% /O.D. Referenced
MISUMI_Test
- Volume Discount
Standard Price: MYR 1.35- Days to Ship: 1 Day(s) or more -
D Series Compression Coil Spring (DIN 2098 Standard)【5-20 Pieces Per Package】
KS SANGYO
Cylindrical compression coil spring following the DIN 2098 standard, popular in Germany.
Standard Price: MYR 70.74- Days to Ship: 1 Day(s) -
Round Coil Springs - Fmax. (Allowable Deflection) =Lx60% - 75% /O.D. Referenced
MISUMI_Test
- Volume Discount
Standard Price: MYR 1.29- Days to Ship: 1 Day(s) or more -
Round Coil Springs - Fmax. (Allowable Deflection) =Lx40% - 45% /O.D. Referenced
MISUMI_Test
- Volume Discount
Standard Price: MYR 1.29- Days to Ship: 1 Day(s) or more -
KS SANGYO
Spring compliant with Japan Spring Manufactures Association Standard (JSMA No.7-cylinder type compression coil spring).
Standard Price: MYR 78.05- Days to Ship: 1 Day(s) -
Compression Coil Spring【5 Pieces Per Package】
SHOWA SPRING
A standardized spring made of general cold-formed piano wire or stainless steel wire.
Standard Price: MYR 51.09 Days to Ship: 4 Day(s) or more -
Round Coil Springs - Fmax. (Allowable Deflection) =Lx35% - 40% /O.D. Referenced
MISUMI_Test
- Volume Discount
Standard Price: MYR 1.39- Days to Ship: 1 Day(s) or more -
Standard Price: MYR 13.20- Days to Ship: 1 Day(s) or more -
SAMINI
[Materials]SUS304-WPB SWP-A
[Max. Load] 0.81–114.6 N
[O.D.] 1.7–100φ
[Free Length] 5–400 mm- CAD ：
- 3D
Standard Price: MYR 10.67- Days to Ship: 1 Day(s) or more -
Round Wire Compression Coil Spring J Spring JA【10 Pieces Per Package】
TOKYO HATSUJYO MANUFACTURING
A round wire coil made of stainless steel wire (SUS304-WPB).
Standard Price: MYR 82.14 Days to Ship: 3 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material |
| Allowable Load (Configurable Range)(N) |
| End Surface Status |
| Allowable Load P2(N) |
| Height H2 at Allowable Load(mm) |
| Free Height Hf(mm) |
| Coil O.D. OD(Ø) |
| Coil I.D. ID(Ø) |
| Spring Constant k(N/mm) |
| Wire Dia. d(Ø) |
| Total Number of Winding N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI_Test | MISUMI_Test | ACCURATE | MISUMI_Test | MISUMI_Test | MISUMI_Test | MISUMI_Test | KS SANGYO | MISUMI_Test | MISUMI_Test | KS SANGYO | SHOWA SPRING | MISUMI_Test | MISUMI_Test | SAMINI | TOKYO HATSUJYO MANUFACTURING |
| Product Series | Round Wire Coil Springs/Deflection 40%-60%/Configurable/O.D. Referenced | Round Coil Springs - Fmax. (Allowable Deflection) =Lx25% - 30% /O.D. Referenced | D Series Compression Coil Spring (DIN 2098 Standard)【5-20 Pieces Per Package】 | Round Coil Springs - Fmax. (Allowable Deflection) =Lx60% - 75% /O.D. Referenced | Round Coil Springs - Fmax. (Allowable Deflection) =Lx40% - 45% /O.D. Referenced | Round Coil Springs - Fmax. (Allowable Deflection) =Lx35% - 40% /O.D. Referenced | Round Wire Compression Coil Spring J Spring JA【10 Pieces Per Package】 | |||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Days to Ship | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) | 4 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 3 Day(s) or more |
| Material | Stainless Steel Wire | Stainless Steel Wire | Stainless Steel Wire / Piano Wire / Oil Tempered Wire | Stainless Steel Wire | Stainless Steel Wire | Stainless Steel Wire | Piano Wire | Stainless Steel Wire / Piano Wire | Piano Wire | Piano Wire | Stainless Steel Wire | Piano Wire | Piano Wire | Stainless Steel Wire | Stainless Steel Wire / Piano Wire | Stainless Steel Wire |
| Allowable Load (Configurable Range)(N) | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 107.01~150.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 73.01~107.00 / 230.01~580.00 / 580.01~ | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 107.01~150.00 / 150.01~230.00 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 | - | 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 107.01~150.00 / 150.01~230.00 / 230.01~580.00 / 580.01~ | ~1.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 73.01~107.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 107.01~150.00 | 4.51~8.50 / 16.01~30.00 | 73.01~107.00 | 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 107.01~150.00 / 150.01~230.00 | 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 107.01~150.00 / 150.01~230.00 / 230.01~580.00 | ~1.50 / 1.51~4.50 / 4.51~8.50 / 8.51~16.00 / 16.01~30.00 / 30.01~50.00 / 50.01~73.00 / 73.01~107.00 / 580.01~ | 16.01~30.00 |
| End Surface Status | With Grinding / Without Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | Without Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | Without Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | With Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | With Grinding / Without Grinding | - |
| Allowable Load P2(N) | 0.15 ～ 35.3 | 0.98 ～ 125.5 | 0.41 ～ 1294.48 | 3.4 ～ 176.5 | 2.65 ～ 35.97 | - | 4.9 ～ 588.4 | 0.9996 ～ 85.358 | 0.38 ～ 23.5 | 0.98 ～ 117.7 | 5.39 ～ 27.15 | 91.89 | 2.9 ～ 171.6 | 6.1 ～ 353 | 0.81 ～ 1628 | - |
| Height H2 at Allowable Load(mm) | 1 ～ 44 | 3 ～ 48 | 1.43 ～ 114.77 | 3.25 ～ 52 | 6 ～ 38.5 | - | 3.5 ～ 76 | 2.2 ～ 19.9 | 1.25 ～ 36 | 2.75 ～ 60 | 6.6 ～ 9.3 | - | 3 ～ 65 | 3.75 ～ 64 | - | - |
| Free Height Hf(mm) | 5 ～ 80 | 5 ～ 80 | 2.7 ～ 205 | 5 ～ 80 | 15 ～ 70 | 15 ～ 65 | 5 ～ 100 | 8.2 ～ 40.5 | 5 ～ 90 | 5 ～ 100 | 13 ～ 18 | 55 | 5 ～ 100 | 5 ～ 80 | 6.5 ～ 150 | 35 |
| Coil O.D. OD(Ø) | 2 ～ 20 | 2 ～ 20 | 1.12 ～ 135 | 4 ～ 20 | 5.9 ～ 19.6 | 5 | 3 ～ 27 | 2.4 ～ 11.25 | 3 ～ 27 | 2 ～ 27 | 5 ～ 12 | 13 | 3 ～ 27 | 4 ～ 20 | 1.7 ～ 75 | 10 |
| Coil I.D. ID(Ø) | - | - | 0.88 ～ 115 | - | 5 ～ 16 | - | 1.9 ～ 21.4 | - | 2.3 ～ 24.4 | 1.4 ～ 23.6 | - | - | 1.9 ～ 22.8 | - | - | 8 |
| Spring Constant k(N/mm) | 0.05 ～ 0.98 | 0.5 ～ 3.9 | 0.059 ～ 27.066 | 2 ～ 14.7 | 0.29 ～ 2.94 | - | 2.9 ～ 29.4 | 0.1666 ～ 7.085 | 0.1 ～ 0.5 | 0.5 ～ 2.9 | 0.843 ～ 3.136 | 5.05 | 1.5 ～ 4.9 | 4.9 ～ 29.4 | 0.175 ～ 29.9 | 1.24 |
| Wire Dia. d(Ø) | 0.13 ～ 1.7 | 0.1 ～ 9 | 0.12 ～ 10 | 0.45 ～ 2.5 | 0.45 ～ 1.8 | 0.5 | 0.45 ～ 4 | 0.2 ～ 1.25 | 0.2 ～ 1.7 | 0.2 ～ 2.8 | 0.5 ～ 1.2 | 1.8 | 0.3 ～ 3 | 0.55 ～ 3.5 | 0.16 ～ 8 | 1 |
| Total Number of Winding N | - | - | 4.5 ～ 17 | - | 6 ～ 27 | - | - | 5.5 ～ 14.5 | - | - | 6.5 ～ 9 | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Material
-
Allowable Load (Configurable Range)(N)
-
End Surface Status
-
Allowable Load P2(N)
- 0.15
- 0.18
- 0.29
- 0.34
- 0.35
- 0.37
- 0.38
- 0.41
- 0.44
- 0.49
- 0.53
- 0.62
- 0.66
- 0.7
- 0.74
- 0.75
- 0.78
- 0.81
- 0.88
- 0.9
- 0.98
- 0.9996
- 1.03
- 1.05
- 1.1
- 1.12
- 1.18
- 1.23
- 1.27
- 1.3
- 1.47
- 1.5
- 1.58
- 1.67
- 1.75
- 1.77
- 1.8
- 1.84
- 1.87
- 1.96
- 2
- 2.2
- 2.206
- 2.21
- 2.26
- 2.3
- 2.55
- 2.6
- 2.65
- 2.75
- 2.9
- 2.94
- 2.942
- 3.2
- 3.23
- 3.3
- 3.33
- 3.4
- 3.43
- 3.5
- 3.53
- 3.68
- 3.7
- 3.9
- 3.92
- 4
- 4.4
- 4.41
- 4.9
- 5.1
- 5.15
- 5.29
- 5.3
- 5.39
- 5.49
- 5.5
- 5.54
- 5.68
- 5.8
- 5.88
- 5.9
- 6.1
- 6.17
- 6.2
- 6.23
- 6.57
- 6.6
- 6.62
- 6.7
- 6.8
- 6.9
- 6.91
- 7.06
- 7.1
- 7.3206
- 7.35
- 7.4
- 7.6
- 7.7
- 7.8
- 7.84
- 7.9
- 7.94
- 8.48
- 8.5456
- 8.8
- 8.82
- 8.83
- 9.41
- 9.61
- 9.7
- 9.8
- 9.996
- 10
- 10.3
- 10.58
- 10.59
- 10.6
- 10.8
- 11
- 11.1
- 11.2
- 11.28
- 11.5
- 11.76
- 11.77
- 11.8
- 12.1
- 12.3
- 12.4
- 12.7
- 12.75
- 13.2
- 13.23
- 13.53
- 13.7
- 13.72
- 14.1
- 14.3
- 14.5
- 14.7
- 15.39
- 15.4
- 15.68
- 15.7
- 15.9
- 16.2
- 17.2
- 17.7
- 18.1
- 18.4
- 19.1
- 19.6
- 19.8
- 19.9
- 20.58
- 20.6
- 21.6
- 22.1
- 22.6
- 23.5
- 23.6
- 24
- 24.01
- 24.2
- 24.3
- 24.5
- 25.4
- 25.5
- 25.68
- 26.5
- 27.15
- 27.5
- 28.6
- 28.7
- 29.4
- 30.4
- 30.6
- 30.87
- 30.9
- 31.2
- 31.4
- 33.124
- 34.1
- 34.3
- 35.3
- 35.97
- 36.3
- 36.8
- 37.3
- 39.2
- 41.2
- 42.2
- 43.1
- 43.5
- 44.1
- 44.5
- 46.1
- 47.1
- 48.1
- 49
- 51
- 51.9
- 53
- 54.9
- 55.9
- 58.8
- 59.8
- 61.3
- 61.8
- 62.8
- 64.2
- 64.7
- 65.9
- 66.7
- 68.6
- 70.6
- 71.6
- 72.6
- 73.5
- 74.5
- 76.5
- 77.5
- 78.5
- 79.4
- 80.9
- 82.4
- 85.3
- 85.358
- 85.8
- 86.3
- 88.3
- 91.89
- 92.7
- 92.9
- 94.1
- 95.9
- 97.1
- 98.1
- 100
- 102
- 103
- 105.9
- 109.8
- 110
- 110.8
- 114.7
- 117.7
- 119.6
- 122.6
- 123
- 123.6
- 125.5
- 132.4
- 135.3
- 137.3
- 141
- 147
- 147.1
- 154
- 159.8
- 161.8
- 171.6
- 172
- 176.5
- 184
- 196
- 196.1
- 199.1
- 205.9
- 220.6
- 221
- 221.6
- 235
- 235.4
- 242.2
- 245
- 250.07
- 257
- 264.8
- 265
- 275
- 294
- 294.2
- 314
- 319.7
- 343
- 343.2
- 353
- 397.2
- 441.3
- 588.4
- 688
- 1147
- 1294.48
- 1628
-
Height H2 at Allowable Load(mm)
- 1
- 1.25
- 1.43
- 1.5
- 2
- 2.2
- 2.5
- 2.71
- 2.75
- 3
- 3.2
- 3.25
- 3.3
- 3.5
- 3.7
- 3.75
- 3.79
- 3.8
- 4
- 4.32
- 4.5
- 4.57
- 5
- 5.28
- 5.31
- 5.44
- 5.5
- 5.6
- 5.67
- 6
- 6.09
- 6.25
- 6.3
- 6.5
- 6.51
- 6.6
- 6.79
- 7
- 7.1
- 7.2
- 7.3
- 7.39
- 7.5
- 7.7
- 8
- 8.25
- 8.3
- 8.61
- 8.75
- 9
- 9.23
- 9.3
- 9.44
- 9.7
- 9.75
- 9.8
- 9.95
- 10
- 10.4
- 10.5
- 10.79
- 11
- 11.2
- 11.25
- 12
- 12.4
- 12.5
- 13
- 13.7
- 13.75
- 13.8
- 14
- 15
- 16
- 16.2
- 16.25
- 16.3
- 16.5
- 17
- 17.5
- 18
- 18.7
- 18.75
- 19.25
- 19.3
- 19.5
- 19.9
- 20
- 21
- 22
- 22.5
- 22.7
- 22.75
- 22.8
- 23
- 24
- 24.5
- 24.7
- 24.75
- 24.8
- 25
- 26
- 26.2
- 26.25
- 27
- 27.5
- 28
- 29
- 29.2
- 29.8
- 30
- 30.3
- 31.2
- 31.5
- 32
- 32.5
- 33
- 33.7
- 33.75
- 35
- 35.76
- 35.8
- 36
- 37.5
- 38.5
- 39
- 40
- 41.2
- 42
- 42.3
- 44
- 45
- 45.5
- 46
- 48
- 48.7
- 49
- 49.5
- 50
- 51
- 52
- 52.5
- 54
- 55
- 56
- 57.6
- 58.5
- 59.5
- 60
- 63
- 64
- 65
- 70
- 76
- 114.77
-
Free Height Hf(mm)
-
Coil O.D. OD(Ø)
-
Coil I.D. ID(Ø)
- 0.88
- 1.4
- 1.42
- 1.48
- 1.6
- 1.9
- 2
- 2.1
- 2.2
- 2.24
- 2.3
- 2.36
- 2.4
- 2.48
- 2.5
- 2.54
- 2.6
- 2.7
- 2.8
- 2.9
- 2.98
- 3
- 3.1
- 3.2
- 3.24
- 3.3
- 3.36
- 3.4
- 3.42
- 3.48
- 3.5
- 3.54
- 3.6
- 3.7
- 3.8
- 3.86
- 3.9
- 4
- 4.1
- 4.2
- 4.24
- 4.3
- 4.36
- 4.37
- 4.4
- 4.5
- 4.6
- 4.7
- 4.8
- 4.9
- 5
- 5.1
- 5.2
- 5.24
- 5.3
- 5.36
- 5.4
- 5.6
- 5.8
- 6
- 6.2
- 6.3
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
- 7
- 7.1
- 7.2
- 7.24
- 7.3
- 7.4
- 7.6
- 7.8
- 8
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
- 9
- 9.2
- 9.4
- 9.6
- 9.8
- 10
- 10.2
- 10.4
- 10.6
- 10.7
- 10.8
- 11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 12
- 12.2
- 12.4
- 12.5
- 12.6
- 12.8
- 13
- 13.2
- 13.4
- 13.6
- 13.8
- 14
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.8
- 15
- 15.2
- 15.4
- 15.6
- 15.8
- 16
- 16.2
- 16.4
- 16.6
- 16.8
- 17
- 17.2
- 17.4
- 17.6
- 17.8
- 18
- 18.2
- 18.4
- 18.6
- 19
- 19.2
- 19.4
- 19.6
- 19.8
- 20
- 20.6
- 21
- 21.2
- 21.4
- 21.8
- 22
- 22.2
- 22.4
- 22.8
- 23
- 23.2
- 23.6
- 23.8
- 24.2
- 24.4
- 115
-
Spring Constant k(N/mm)
- 0.05
- 0.059
- 0.069
- 0.098
- 0.1
- 0.147
- 0.157
- 0.1666
- 0.175
- 0.2
- 0.206
- 0.258
- 0.284
- 0.29
- 0.3
- 0.34
- 0.343
- 0.42
- 0.422
- 0.441
- 0.49
- 0.5
- 0.568
- 0.622
- 0.765
- 0.794
- 0.843
- 0.98
- 1
- 1.176
- 1.22
- 1.24
- 1.481
- 1.5
- 1.52
- 1.588
- 1.85
- 2
- 2.187
- 2.209
- 2.283
- 2.2932
- 2.36
- 2.511
- 2.55
- 2.9
- 2.94
- 2.981
- 3.136
- 3.9
- 3.923
- 4.763
- 4.9
- 5.05
- 5.9
- 7.085
- 7.424
- 9.8
- 14.7
- 14.906
- 19.6
- 20.4
- 25.2
- 27.066
- 29.4
- 29.9
-
Wire Dia. d(Ø)
-
Total Number of Winding N
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Round Wire Springs
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy